Home Creators Posts Import Register Favorites Logout

Content

ENGLISH/ESPAÑOL

Hello everybunny!
Today's post is a bit different. Working on one of our current commissions, we have found ourselves in a new situation, and we thought it would be interesting to make a short tutorial about it! So if you want to know more, keep reading :D

Starting from the beginning, as we showed a while ago, we were working on a very cool furry kitty. With all the patterning and embroidery designed, it was time to make the final plush.

What happened? Well, when we started to make the plush with the chosen colours, seeing the fabrics together on the plush, we realised the colours didn't look good together. The orange was too dark and intense, and the plush was too intense.
The problem is that there are very few minky orange shades, so we didn't have many options.

So after discussing with the customer, we saw in our mochi samples that there was the perfect orange shade for the design. So without thinking twice we got the new fabrics!

Once the fabric arrived, the challenge started. We have made mochi plushies before, but always with more simple and round shapes, like Gomamon or Chao. We have NEVER used it for complex patterns with defined shapes. We were a bit afraid.

But we have good news; it's totally possible! In fact, it's easier than we thought. Let's show you how we did it! ^^

We couldn't use the pattern for minky right away with mochi. It's way more stretchy than minky, so the patterns would lose shape. So we took the patterns, digitized them and thought about what to do. To compensate the stretchiness, we had to make the pattern thinner. So we reduced the width of all the patterns by 5% in the stretch direction, which is the direction the fabric stretches (perpendicular to fur direction).

Look at the comparison between the original pattern and the mochi one. Do you see the difference? With this change, when mochi stretches, it will look like minky!

With this change you will have 90% of the work done, but there are a few other details to keep in mind:

  • Some pieces need to be shrinked a bit more. For example, the head gusset, which being so small the 5% barely did a difference and we had to remove some extra.

  • When making the embroidery, be careful with stabilizer and hoops. With small embroideries or simple applique it's good, but if the embrodiery has many colors or layers, you can easily end up with holes, ugly stitches or a deformed design.

    Our suggestion is that you use a wider stitch width, and most important, thick stabilizer. The more stability and stiffness, the better. Also it's better to hoop the fabric rather than stick it to the stabilizer with spray. Minky works well only sticked, but mochi is so stretchy that the glue spray barely does anything.

  • If there are different embrodiered or appliqued elements, keep in mind that the distance between them will grow, so you may need to rearrange them making them closer to each other or even resize the appliques a bit.

  • When adapting the embrodiery design, only change the pattern shape width, embrodiery is not stretchy! If you make it thinner, it will stay like that!


In order for you to see the differences better and what we are talking about, here are a few photos of the "transformation process"!

And now, with all this in mind and a few tests in between, we have the perfect head for our plush!

We honestly thought mochi would be more limited and couldn't achieve such defined shapes, but we were wrong. It's always nice to know there's more variety options for future projects!

What do you think? Now that you know how to adapt patterns and embrodiery for minky to mochi fabric, will you try it out? Keep in mind that you can use the same method the other way around! :3

We are personally very happy, and we hope this short tutorial helps you in the future!

Big hugs to everybunny and enjoy your Summer 🥹

ESPAÑOL

Hello everybunny!

Hoy venimos con un post un poco diferente. Trabajando en uno de nuestros actuales encargos, nos hemos encontrado con una situación algo nueva, y hemos pensado que sería interesante haceros un pequeño tutorial sobre ello! Así que si queréis saber más, seguid leyendo : D

Empezando por el inicio, como os enseñamos hace un tiempo, teníamos a medio hacer un gatete furry muy cool. Teniendo ya todo el patronaje y bordado diseñado, sólo quedaba ponerse a pasarlo a limpio.

¿Que pasó? Que al poner las telas de minky juntas, con el aplique y todo, nos dimos cuenta que los colores no funcionaban bien. El naranja era muy oscuro y fuerte, y quedaba un peluche demasiado fosforito.

El problema es que en minky hay muy pocos tonos de naranja, no hay muchas opciones.

Así que tras hablarlo con el cliente, vimos en nuestro muestrario de mochi que había el color perfecto para el diseño. Y sin pensarlo mucho, compramos las nuevas telas!

Ahora bien, al recibir la tela, llegó el reto. Hemos hecho peluches de mochi antes, pero siempre con formas bastante "simples y redondas", como el Gomamon o Chao. NUNCA la hemos usado para patrones complejos y con formas muy marcadas. Nos daba algo de respeto.

Pero tenemos buenas noticias; es totalmente posible! Y de hecho, mucho más fácil de lo que esperábamos. Vamos a mostraros como lo hemos hecho ^^!

Bien, teniendo ya el patrón de minky, como sabréis, no podemos usarlo tal cual en mochi. Es una tela mucho más elástica, por lo tanto, perdería la forma. Así que cogimos el patrón, lo digitalizamos y pensamos un poco en ello. Si queríamos contrarrestar la eslaticidad de la tela, teníamos que contraer el patrón. Así que lo estrechamos un 5% a lo ancho, o sea, en la dirección en la que se estira (perpendicular a la dirección del pelo).

Mirad la comparativa del patrón original y el de mochi. Veis la diferencia? Con este cambio, cuando la mochi rellena se estire, quedará como la minky!

Con este cambio tendréis el 90% del trabajo hecho, pero hay que pulir un par de detalles más:

  • Algunas piezas hay que encogerlas un poco más. Por ejemplo la pieza del morro que, al ser tan pequeña, se ensanchaba demasiado en proporción

  • A la hora de bordar, tenéis que tener cuidado con la entretela y los bastidores. En bordados pequeños o simples como los apliques, no hay problema. Pero si tienen muchos colores y capas, y hay que ir poniendo estabilizador, podéis tener fácilmente agujeros, puntadas feas o deformar el diseño final.

Nuestro consejo es que uséis anchos de puntada grandes y, sobretodo, utilizar una entretela muy gruesa y resistente. Cuanta mayor estabilidad y rigidez, mejor. Es mejor enmarcar la tela que pegarla. La minky funciona bien solo pegada, pero la mochi se estira tanto que el pegamento muchas veces no es suficiente.

  • Si hay varias piezas bordadas o con apliques, tened en cuenta que la distancia entre ellas crecerá porque se estirará más. Quizás tenéis que acercarlas un poco o encogerlas.

  • Al adaptar el bordado, estrechad solo la forma del patrón, el bordado no es elástico! Si lo estrecháis se quedará deformado!

Para que podáis ver mejor las diferencias y lo que os comentamos, os dejamos unas cuantas fotos del proceso de "transformación"!

Y ahora sí, con todo esto en mente y algunas pruebas de por medio, tenemos ya la cabeza perfecta para nuestro peluche!

De verdad, creíamos que la tela mochi tenía limitación y no podía conseguir estás formas tan marcadas. Pero nos equivocábamos. Siempre está bien saber que hay más variedad para usar en nuestros futuros proyectos!

Qué os parece a vosotres? Ahora que sabéis cómo convertir patrones/bordados de minky a mochi, os animaréis a probarlo? Tened en cuenta que podéis usar el mismo método a la inversa también! :3

Por nuestra parte estamos muy contentas. Y esperamos que este tutorial os ayude en el futuro!

Un gran abrazo para todos y pasad un gran verano 🥹

Files

Comments

Caelum Freedom

Is soo cool! I need it finished 🥹🫶🏻

racingwolf

I've done something similar with a few of my plushies but so nice to have this all written out like this!

Boira Plushies

Oh cool! It's not difficult to think about it but since we did some stretchiness tests, at least knowing the % we reduced it saves some time hehe

sarah

Thanks for walking us through the process of swapping between the different fabrics. It was super helpful! I was at the fabric store yesterday for minky and I was just noticing that there were only 4 or 5 orange shade options. It's so interesting to me how some colors have tons of options and others only have a few.