Home
Creators
Search Recent Random
Posts
Search DMs Popular Hash Lookup Tags Random
Importer
Import FAQ
Register Favorites Keys Review DMs Logout
Community
Telegram ThePornDude
Home Creators Posts Import Register Favorites Logout

Fae Wolf Dragon! (Patreon)

Published:
2024-07-14 23:19:04
Edited:
2024-08-19 19:52:27
Imported:
2026-06
Tags:

Content

This was an JULY Design and has been Archived! If you were subscribed in JULY, you will receive an email from MyMiniFactory within the week to access the archived files from that month. If you are starting your Subscription in August 2024, Welcome! Your exclusive models are available immediately in the Exclusive posts (link below) and the AUGUST Models will be in the AUGUST posts tab as they come out over the month! https://www.patreon.com/cinderwing3d?filters[tag]=Exclusives

If you missed this model or any others they are available on MMF for purchase! You can get the most up to date discount code on the Welcome and Info post!

https://www.myminifactory.com/users/Cinderwing3D?show=store

-----------------------------------------------------

UPDATE 3: There is an updated Open Wing file VERSION 4 attached below. I have made more support crystals at the base of the big wing and another additional connection farther up for those of you who are having using with the filament printing correctly up the wing. Also remember, there is a Close Wing version (where there are no open holes) which is easier to print.

If you are still having issues please read the below helpful steps that one of our Testers, "Silver", has outlined:

*Wings failing? Here are some suggestions:*

- NOTE: this is geared towards Bambu printers, as these have mostly been the ones having issues. However, many of the general principles should be applicable to other printers as well.

- Make sure your cooling is at 100% when printing PLA. On the A1 series printers, the part fan cooling defaults to 80%. Go into filament settings and set that to 100% anytime you are printing PLA

- Slow down your overhangs! Find the speeds that we suggest in the image below (attached to the post please note screenshot is from Orca but the speeds are the same! You will be missing the slow down for curled overhangs checkbox in Bambu Studio)

- Use a brim. Recommended brim settings: gap of 0.2-0.4mm, width of 5-6mm

- If using a textured PEI plate, make sure it is clean. Wash it with soap and water, dry it with a paper towel. Do not use glue/hairspray on a textured PEI plate when printing PLA, glue is a release agent and does not improve adhesion.

- Dry your filament, even brand new filament can/will be wet. Dry for at least 8hrs at 50C.

- Tune your filament: flow ratio in particular is important.

UPDATE 2: Fixing one fuse created another, oops. It is 100% fuse free now! Sorry y'all! Update: a VERY small fuse was found, this has been fixed. :) This was only on the open wing version, please download V2!-------------------------------------------------

Hi Cinders!

I have a new Wolf Dragon for you all:::: the FAE WOLF DRAGON! 

The original Wolf Dragon had pop in wings, and by popular request, I have made this an all in one print with no pop-ins! Like all wings this style, simply rotate and fully expend the taller wing part out to hold them in place!

Also - as a fun bonus I made two wing renditions for you all! Closed Hole Wings and Open Hole Wings! The Open Hole Wings have cut outs in the wing design and print well with little overhang.

The filament used is ZIRO Pastel Spectrum, but it does look like it is out of stock at this time.

Thank you all! Next release will be in about a week! Stay tuned! :)

- Tracy

----------------------------------------------------

All my designs are print-in-place and require no supports. All you need is a clean bed and you're off!

Print Settings:  .2 Layer height, 15% infill, gyroid infill, no brim, and no supports. (If there are smaller parts of your print that have a hard time staying stuck to the plate, please try a brim around those parts)Any errors regarding floating regions can be safely ignored. If you are having issues with the hole wings please check your cooling and overhangs!

Please join our discord chat below for more help and discussions.

Filament: https://www.amazon.com/shop/cinderwing3d

------------------------------------------------------

JULY 2024 Models:  HERE

Tiny Squid - RELEASED

Tiny Starfish - RELEASED

Fae Wolf Dragon - RELEASED

Secret Design

Secret Design

-------------------------------------------------------

PLEASE READ

Please remember, NO sharing, re-selling, or distributing this digital file or modifications of it in any way.  Also, you are not authorized to use Cinderwing3D photos or anyone else's photos without their permission.

Please see WELCOME POST for questions, all exclusive releases, and links:  https://www.patreon.com/posts/welcome-to-info-71819754

All Supporter Exclusives: https://www.patreon.com/cinderwing3d/collections

Discord is our MAIN form of communication and way to provide help! Please join our community below: Discord chat HERE: https://discord.gg/cinderwing3d

For any help requests or issues please go through this email: Email (contactcinderwing3d@gmail.com) OR through a Discord ticket!

Thank you, Cinders, for your support!!! And Thank you to our Admin Jazzy and Test Team for all your hard work!

Files

Comments

Maddog M

This is Beautiful

Kriket

Omg!!!! I love it!! Can’t wait to make it!

Bobmn

this is great cant wait to print thanks!

Cali Stevens

It's beautiful. I am wondering if we can get an update of heads and tails for keychains for the newer guys.

Jawzua

I know what my next print is this is the dragon I didn’t know I wanted

Adam

The wolf dragon is by far my favorite dragon, can’t wait to print this one!! Would love a wingless version too if possible!!

michael mccabe

Wow! Amazing work! You are the best!

michael mccabe

What is the most it can be scaled down to?

LovelyFowlThings

This one is beautiful. Now we need a darker dragon, like a scorpion dragon!

Silvyr

I love this SO much! Might be my favorite dragon- and that’s saying A LOT!!! 😍

cinderwing3d

The head and tails keychains were just separating the model to objects and pulling the heads and tails, they aren't really modified so much as pulled apart! You are welcome to do this with any dragon!

Erin Thurston

This may be my new favorite out of literally every file I own from every creator I subscribe to. It's so pretty I've got to print 10 just for myself

Cris

Omg so inlove with it

James

That is going to be a beautiful dragon! I can’t wait to print it

Kristin Coker

OMG!!!!!! I cant wait to have a printer free! Im in love with this Fae Wolf Dragon! Please if you ever do the head mount again this would be so cool as one.

Mawk

Check out the Dune Striker.

LovelyFowlThings

Oh holy crap, how have I never seen that one before. THANK YOU!!

JMac Creations

I just finished printing one today. Check the pic share thread

JMac Creations

Its freaking awesome!! Got 1 started right now and when another printer finishes ill be doing one on it as well. Ill be selling it in my booth at the 10 day state fair starting next week.

Keith N.

Sooo odd question I started v1 when I went to bed. It's been going for 9 hours should I stop it and get v2? I'd hate to waste time and material if the dragon isn't usable.

quiXilver09

I was thinking the same thing, but I'm letting it ride.

Keith N.

At this point same. It's got about 7 hours left now. Def gonna try v2. I wonder if they plan on releasing a 3mf one I'd love to choose the colors.

MovieDefenders Podcast

Where is the fuse on v1? My 60% open wing didn’t seem to have an issue.

robert roast

Not sure if anyone else had an issue, But my leg still fused slightly on the v2 version and the middle of the wing in the fold out part broke off as it was printing.

cinderwing3d

Hmm it shouldn't be fused and I'm not sure about the wing. I'll review it again!

.cliff

Oh the agony of waiting for other prints to finish. Ha! Can’t wait to start this one. From the pictures I think this might be my favorite one yet.

robert roast

Thank you, Not sure if it might be the filament. I'm going to try another and see what happens.. Otherwise its absolutely amazing !!!

Levi N

I'm in love with this one. I printed it overnight

cinderwing3d

Myself and the testers are double checking it now and do not see any leg fusing on the V2 but I'll triple check!

Cat Rees

My kids are gonna lose their minds for this one!

quiXilver09

It was so minor used some snips no one would ever know

robert roast

No worries!! It's a beautiful design can't wait to get it going again.

Keith N.

That's a relief and cannot wait until I get off work to give it a go.

Dave Walker

There was a fuse problem. Printed a few of these and didn't have a fuse issue. Where was the fuse located at?

cinderwing3d

its on the front left (dragons left) leg very tiny haha

Dave Walker

That's weird. It printed just fine right when it was released. Perhaps some printers work and some don't as well.

Kim Fairbrother

I canceled version 1 for version 2. V2 has 2 hrs to go. I'm gonna let it ride.

MR Crafty

where is the mmu please?

cinderwing3d

It should be fine, a lot of folks are coming back saying a little wiggle breaks it free!

cinderwing3d

There is no color file for this one. Do remember that color files are a bonus, not an expectation!

Kim Fairbrother

I'm not worried. I'm so excited to see it finished. I was saving my favorite silk filament for a special print. It's going to be gorgeous 😍

ShealynRCP

Will there be a color file version ?

Sabrina Roberts

Was going to print both at 65%, but i have to wait. My 9yr old requested and decided on the four different colours for this one (I think he likes this the most). Now I am working on getting the colours just right before i print. Wish me luck!

Jeff Robinson

I get the same warning with both V2 and V3: "It seems object Cinderwing3D Open Hole Wings V2.stl has floating regions. Please re-orient the object or enable support generation.

Music City 3D

My very first 2 prints both failed on one of the inner wings. The middle of the inner wing was just broken apart.

Maddog M

I had the same problem the inner wing a piece printed a little off it was v3 update

cinderwing3d

Make sure you check your cooling and overhang settings!

Jeff

i printed the with hole wings and it was done by 10am the next morning, by then you had released an update. I printed no hole wings last night. I have one wing very hard ti get to pivot. The wing on the right loooking at the nose is stuck solid.

.cliff

Successfully printed 4 so far, all @ 60% with different filaments to test. No issues with default settings (Bambu Studio). I did break the inner right wing on the first one, but only because i was lifting it too hard, not due to a printing issue. These look and print great! I too received the the "floating regions" warning, but let it ride and had no issues.

Mindi Nel

Mine both broke apart in the middle wings as well

Bio

Did the holes in wings. 16m left and it's like the whole tips of the middle wings shifted in the file and just started spaghetti everywhere. Print head is running no where near where the wings are. Edit. You can see about a 1/2in down where it started to shift. X1 carbon, standard speed.

Ellyn Stephens

Will there be one without wings? I was so impressed with my print until the middle of the wings popped out and ruined the print with less than an hour to go. I had even slowed it down to avoid the wing pop on the second one but no go. Going to try to remove the wings to at least have a semi usable print. I just don't have luck with print in place wings.

Jeff Robinson

I had this as well. I'm now trying it with a brim to see if I can keep that part adhered to the bed

cinderwing3d

That sounds more like a first layer issue. There was fusing in a leg, not a wing.

Music City 3D

You are not going to like a brim on an articulating dragon. So much work afterwards to clean it up. Just not worth it.

Mindi Nel

Middle of the inside wings failed and broke apart on 2 of these. Both at 100% and one at 60%. I'm seeing several others are having the same issue. Are you going to address this problem? I can actually see this same problem starting on one of the wings in your photos. Take a close look at the top right inside wing in your picture

cinderwing3d

If you are having issues I'd recommend looking at your speed, cooling, and overhang settings. Me and the test team will look more into it but none of the testers had much issue with this model. You can also make use of the closed hole version!

Mindi Nel

What would be your recommended settings? I'm using the default in Bambu slicer. Printed on a P1S

cinderwing3d

Bambu defaults are pretty fast. Toggle advanced on and under Speed -> Overhang Speed, make sure slow down for overhangs is ticked on. Then for the overhang speeds top to bottom I suggest 30,20,20,10 I also make sure to have 100% part cooling for PLA as well as 70% aux fan if available.

Mindi Nel

I'll give it a try on the X1 with these recommendations

Jeff Robinson

it worked brilliantly with a 3mm brim and at 50%

Derek Jensen

2 failures in a row for me! Ugggg! First one on my A1 when one wing poped off the bed. 2nd on my K1, when there was a huge layer shift in the middle of the wings for no apparent reason? Everything was still stuck to the bed. I’m giving up on this one for now. (It’s the one with the holes in the wings)

Kathy tran

u having issue with the new file?

Joseph Knight

Love it, but only 1 successful print out of 3. Not making anymore. Open wing version at 75% printed nice. I tried one at 100% and middle of one wing was weird and the top of one wing just...didnt print and dropped the filament in the wrong spot.

Bio

This is what happened to mine. 16m to go and it just went spaghetti everywhere. Just the center wing. You can see where it started to go off in the print down in the wing.

MamaBear

Welp, 1 out of 4 isn’t bad.. UGH. I’ve slowed it down added a brim (And I never have adhesion problems) Gyroid infill and that one wing always messes up. I’m so sad cuz it’s so beautiful. I just can’t waist any more product. 😞

Silvyr

3 failures for me on 2 different printers. I LOVE the open wings, but can’t get the inside wing to print. I slowed the print down to 75% but it still failed. GORGEOUS dragon… I’m going to try the solid wing. She said there was a solid wing version, right?

Alex Rogers

Same for me. All ok until the middle of the wings which failed

Derek Jensen

Similar issues. Got to the center of the wings, and shifted and went all spaghetti. Not wasting any more filament on this one.

Amber Briggs

I love this model but the wings don't love me will there be a no-wing version by chance?

Hippie

Same I’ve lost so much filament trying to print this even with the new version. Exact same area on the wings with the open holes.

Silvyr

I’m trying the solid wing right now *fingers crossed* Actually, it makes me feel better that so many are having trouble. It’s not just me 🤣 I opened a ticket with Bambu- but canceled it when I saw so many were having the same problem

Om Krim Kali

K1 too fast, A1 need glue as it's open and long print my turned out great . I always use glue, never brims they are a pain to get off. I do my winged Dragons in P1S or X1C always and at 50% silent mode, top layers at 150 speed

Om Krim Kali

Success 1st go always use glue, not a brim fan too messy and never come off clean. P1S and 50% silent mode always for Dragons never rush them. 150% top layer outside/inner walls. Love this model

Bert Keefer

is there a multi color file of this one ?

Cris

Okay I'm going to try your way. I am dying to print this beauty but like the others the one wing turns to spaghetti and slow down for overhang is ticked on

Jonathan Kressin

I'm going to join in with others that there is something with the lace design on inner part of the wings that is very finicky. I have a slower printer that handles overhangs really well, to the point that it was able to recover from the failed section and print the rest of the wing. It'll look nice on our shelf, but not sellable.

Jonathan Kressin

Off the build plate, the failure point for me appears to be with the branches coming off the central column. On both sides, I got a bit of spaghetti in there where those branches failed. Fortunately, the rest of the wings completed and I was just able to cut out the mess in the inner wing and it still looks good. I'll stick to solid wing for now, but maybe just a little bit more support on the inner section would stabilize that column and improve reliability. Other then that, one of my favorite dragons you've made so far.

Debitsncredits

Is there a tadling version coming by chance?

Kenny and Katie M

I also had trouble with the inner wing always coming loose and being brittle if it did work. I’ve been using high quality filament like cookiecad and it’s been a lot better now

Chelsie Rhees

the updated file but I dont see where to download the V2? still only shows V3

Micheal Malsed

argh - three failures at the inner wing. Two different printers (Prusa and Kobra) - first failures of any Cinderwing stuff. :(

Thor

V3 has now had 4 failures at the inner wings on the open design. V2 was the only one to actually finish for me. Going back to V2 and just breaking the little joint loose.

Dennis Crawford

2 failures on v3 inner wing same spot on each one finished but the in side of wing was missin

Mac Kloberg

Also 2 failures on both sides out of 3 on the open V3 middle wing that were printing at the same time on different printers. I think the problem starts already around layer 25, below the "y" when the column goes pretty far up but only has two walls with nothing in it for a while. The drag from the nozzle further up, simply snaps that off during printing. If that was a tiny bit thicker, this might not be happening. Or perhaps a slightly different pattern below the "y" that can support itself better to the neighboring geometry. Otherwise, everyone I showed this to loved it. This may be one of your best designs yet! :-) Cheers, Mac

Lindsay Walker

Love this design so much, I've attempted it 3 times now. Furthest I've gotten was today, at 90%.

Ellyn Stephens

I asked earlier and she said she doesn't plan on making one :(

cinderwing3d

Everyone, the only thing between the versions was a fix in the fuse in the leg. NOTHING else on the model changed and none of the fixes had to do with the wings. Please make sure you slow down the wings, use a brim, and check your overhang and cooling. Thank you! :)

LotusCreativeDesigns

Love the design! The center wings on both sides are still causing a problem for me though!

Sewfor54

Me too. I have had two fails out of three.

Muffina

i would love this wings on a butterfly dragon!

Anthony Agee

I had my fail as well. In my case the wings completely popped off the plate. I was able to hot glue them on long enough to get it completed to a point where it looks like it was designed to look that way. I got to something like 92%. I'm still new to using my printer so the issue could have been mine. It was such a long print.

John Hromada

I also had 2 failures on V3 openwing. Center part of the wing near the top

Mason Russell

I've had 2 failures on the v3 openwing using my Bambu Lab P1S with AMS. The top Y on the wings has broken off both times during printing. Printing using the factory 0.16mm high quality profile. Any tips on getting this to work? This is the only print I've had trouble with.

craig

i had the same two times i think this model needs to be printed at really low speeds. In fact its on the not to print list for me now.

craig

same!

Rose

I had a fail in the left wing on the inside. big hole.

Lopos

same here..

Bernie

it's very confusing

Bernie

This many failures is not common.

Bernie

me too but it's a user problem?

cinderwing3d

Hey everyone! As stated on the new Baby Axolotl Post I am working on adjustments to this file. I see and understand folks are having issues. Please be patient! You do not need to keep reporting you have issues! I am aware and working on it. Thank you. :)

cinderwing3d

The reason is stated on the post. The fixes were for a leg fuse, it has nothing to do with the wing.

Ronece Vairy

Love this model. I have been printing all the dragons for months now, but i am now have issues with the articulating connections. They are all jaggered and dont connect well, i have tried all different settings. Can someone help, Bambu lap P1S on Orca Slicer. Thank you

Ronece Vairy

Up my cooling or reduce it? For the whole print?

cinderwing3d

Cooling and speeds are an overhangs best friend. I'd recommend testing out what works best for you and your printers! Generally more cooling helps

Jackie Ansley

Will there be a version without wings?

Bernie

when is the fix coming? before another release because we are waiting

cinderwing3d

V3 comes after V2 so there is no reason to download V2

Amber Briggs

Thank you so much for working on this model again it's such a great one

Nicole Martin

Thank you for posting these updates! Stupid question... My Bambu Lab software does not look like the screenshot you posted. Is it because I print on the P1S and you use the X series? For example, I am not seeing the "Slow down for curled perimeters" option. Thanks!

Mawk

I think slow for curled overhangs is currently only in Orca slicer. But having the slow for overhangs checked in Bambu studio is still there.

cinderwing3d

Sorry that screenshot was from Orca, the rest is the same :)

Nicole Martin

Wow thanks for the fast reply! Thank you so much for the help on this. I am going to try these settings on some other models I print that also have overhang issues.

Bernie

Glad I paid for the July membership.

Bernie

Ok for me but not for thee?

Bernie

We just want the better testing bonus

JBE

First print attempt, went perfect. No issues, printed at 100%, followed all the settings advice here. Used lots of glue.

Mac Kloberg

Thank you so much for fixing the problem with V3 and releasing V4. Just printed one and had no issues. I'll be printing a few more shortly, but looking at how you fixed it - I'd say we can consider this problem resolved. Thanks again, Mac

Thor

V4 Open Hole wings has been great! 2 have printed with no issues and I kept the same settings as the previous 4 that failed. Thanks for fixing this one!!!

Shauna

Like many, I had a few failed prints with the first two versions of this. I missed downloading the latest V4 in July. Does anyone know if the version on MyMiniFactory is V4? It doesn't say in the file name after downloading it. Thanks!

Shauna

Thank you!

KensDigiShop,LLC

Im not understanding something, if we are a subscriber, can we sell the printed Fae Wolf Dragon? I only ask because when I bought the file, it said personal use only.

cinderwing3d

Yep as long as you are a subscriber you are good to go

Rickhtoo

Please explain how I can get this dragon.. I am subscribed, but can not find a link to it. I just received the email , but none of the links will take me to a download link.. I can only see the pictures. Thanks

cinderwing3d

Hey there, they should be on your MMF account!

Rickhtoo

It is requiring me to purchase it.. Do I have to purchase it even though I have subscribed for a year? Can you not simply make it available for download here? Thanks..

cinderwing3d

Please message in if you are having issues with MMF, thank you

Mishti3D

Hi, I have the same question. Why is the download link not uploaded to Patreon? I don't have a MMF account, how would I even link it to your Patreon to ensure these are free? I've been subscribed to you for a few months now. Thanks

Muffina

I love the open wings, but a wolf fae dragon is a bit too far fetched for me. Will there also be a fae dragon with those open wings? or do they already exist somewhere and i don t know? Thanks!

crowenest3dcreations

I wanted this dragon and subscribe to u but when I go to mini factory it wants me to pay for the file

cinderwing3d

If you feel like you are missing files please message in and I can check it out!