Paso a paso: Bosque de Abedules - Step by step: Birch Forest (Patreon)
Content
🇪🇸Hola a todos hoy vamos a hacer un nuevo paso a paso y en este caso vamos aprender a pintar estos abedules, con sus troncos tan caracterí
🇪🇸Hola a todos hoy vamos a hacer un nuevo paso a paso y en este caso vamos aprender a pintar estos abedules, con sus troncos tan característicos y este bosque un poco otoñal.
🇺🇸Hello everyone, today we are going to do a new step by step and in this case we are going to learn how to paint these birches, with their characteristic trunks and this forest is a bit autumnal.
🇪🇸Empezamos como siempre haciendo el dibujo. En este caso vamos a señarar la zona que es de árboles del fondo y la zona ya de suelo. Y luego vamos a dibujar principalmente los troncos de los árboles principales, solo las siluetas y un poquito, lo que sería la zona de árboles de atrás y los troncos de la zona del fondo, pero todos muy simples y sin meternos en detalles.
🇺🇸We start as usual by doing the drawing. In this case we are going to point out the area that is of trees in the background and the area already in the ground. And then we are going to draw mainly the trunks of the main trees, only the silhouettes and a little, what would be the area of trees in the back and the trunks of the area of the background, but all very simple and without getting into details.
🇪🇸Vamos a humedecer toda la zona del fondo y vamos a empezar pintando lo que sería primero el cielo, con un color azul muy suave, como veis en la foto color azul cobalto pero muy lavado, muy transparente, respetando los troncos principales, dejándolos en blanco.
🇺🇸We are going to moisten the entire area of the background and we are going to start painting what the sky would be first, with a very soft blue color, as you can see in the photo, cobalt blue color but very washed, very transparent, respecting the main trunks, leaving them blank.
🇪🇸Y después mientras todavía sigue húmedo, vamos añadir un color anaranjado, Siena natural y Indio dorado en la zona de los árboles del fondo.
🇺🇸And then while it is still humid, we are going to add an orange color, Raw Siena and Indian Gold in the area of the trees in the background.
🇪🇸Y mientras está húmedo podemos intensificar un poquito más ese color en la zona un poquito superior y dejar la zona inferior de troncos, un poquito más suave.
🇺🇸While it is wet we can intensify that color a little more in the area a little higher and leave the lower area of trunks, a little softer.
🇪🇸Después lo que vamos hacer es sacar esos troncos, como veis son muy claros, son prácticamente blancos y lo vamos a hacer es sacarlos con una paletina, es decir, levantar el color en esa zona donde esté cada tronco y que quede blanco.
🇺🇸 Then what we are going to do is remove the paint of those trunks, as you can see they are very clear, they are practically white and what we are going to do is take them out with a flat brush, that is, lift the color in that area where each trunk is and get a white trunk.
🇪🇸Ahora vamos a pintar la zona inferior, lo que sería el suelo, con esos tonos anaranjados en la parte más hacia atrás, del fondo y más verdosos en la parte más hacia el primer plano.
En este caso no mojo previamente el papel, porque no quiero que me quede tan húmedo, sino que doy directamente el color más anaranjado anterior y el color verde y cuando está todavía húmedo, sí le puedo dar un poquito más de color en algunas zonas, tanto verde como marrón.
🇺🇸Now we are going to paint the lower area, what would be the floor, with those orange tones in the rearmost part, from the bottom and more greenish in the part towards the foreground.
In this case I do not wet the paper beforehand, because I do not want it to be so wet, but I directly add the previous orange color and the green color and when it is still wet, I can add a little more color in some areas, both green and brown.
🇪🇸En el caso de los troncos principales, como veis son blancos, entonces lo único que vamos a tener que pintar es la zona de sombra, que yo le voy a poner en la parte izquierda, con un Violeta mezclando azul cobalto y Alizarina, pero muy muy suave fijaros que queda prácticamente transparente.
Y una vez que haya secado, es cuando vamos a añadir ese relieve, esas zonas más oscuras que tiene en el tronco, pero tenemos que esperar a que seque, porque lo vamos a hacer con pincel seco.
🇺🇸In the case of the main trunks, as you can see they are white, so the only thing we are going to have to paint is the shadow area, which I am going to put on the left side, with a Violet mixing cobalt blue and Alizarin, but very very soft note that it is practically transparent.
And once it has dried, it is when we are going to add that relief, those darker areas that it has on the trunk, but we have to wait for it to dry, because we are going to do it with a dry brush.
🇪🇸Y mientras se secan los troncos, volvemos a la parte de atrás y damos algún toque en los árboles de fondo, pero muy poco y con poca intensidad de color porque está en el fondo y no queremos que se nos vengan hacia delante. También podemos añadir algún arbusto en la parte inferior de esos árboles.
🇺🇸And while the trunks dry, we go back to the background and add some touch to the trees in the background, but very little and with little intensity of color because it is in the background and we do not want them to come forward. We can also add some shrubs at the bottom of those trees.
🇪🇸Para la segunda capa del suelo vamos a añadir primero unas zonas como de arbustos, hierbas, etc. con unas pinceladas en colores marrones. En este caso estoy usando una mezcla de sombra tostado y indio dorado y lo damos en esas zonas en que vemos que hay como arbustos en el suelo.
🇺🇸For the second layer of the soil, we are going to first add some areas such as shrubs, herbs, etc. with some brushstrokes in brown colors. In this case I am using a mixture of Burnt Umber and Indian Gold and we add it in those areas where we see that there are like bushes on the ground.
🇪🇸Añadimos también una segunda capa en esta zona, en los verdes, con verde SAP, lo damos en las zonas verdes, pero también lo mezclamos en alguna de las zonas que habíamos dado esos marrones.
🇺🇸We also add a second layer in this area, in the green ones, with SAP green, we add it in the green areas, but we also mixed it in some of the areas that we had added those brown ones.
🇪🇸Para hacer ese relieve que tienen los troncos, vamos a hacer una parte pintandola normal, como siempre hacemos, más con pintura que tenga agua y otra parte más en seco.
Para la parte normal vamos a a usar esas pinceladas como veis horizontales, para que nos dé esa sensación de tener esas zonas más oscuras, esos relieves del tronco y vamos a mezclar un azul índigo y un sombra tostado, para hacer ese color, que sea así oscuro, pero que no sea totalmente negro.
Una vez que está hecha esa zona, si podemos añadir alguna otra zona en pincel seco, para que nos quede más relieve. En este caso lo hacemos es que mojamos el pincel, después lo secamos bien en el papel y damos la pintura muy seca, prácticamente de lo que sería del tubo directamente y como veis en esta foto, el pincel tiene que quedar así como si pareciera un poco una escoba.
Acordaros también de dar más pinceladas y que quede más oscura la parte izquierda, que es la que se supone que es la parte de sombra
🇺🇸To make that relief that the trunks have, we are going to do a normal part by painting it, as we always do, more with paint that has water and another part more dry.
For the normal part we are going to use those brushstrokes as you see horizontal, to give us that feeling of having those darker areas, those reliefs of the trunk and we are going to mix an indigo blue and a burnt umber, to make that color, that it is so dark, but that it is not totally black.
Once that area is done, we can add some other area in a dry brush, so that it is more prominent. In this case what we do it, is that we wet the brush, then we dry it well on the paper and add the paint very dry, practically from what would be from the tube directly and as you see in the photo, the brush has to look like it looked a bit like a broom.
Also remember to add more brushstrokes and make the left part darker, which is what is supposed to be the shadow part.
🇪🇸Hacemos lo mismo con los otros dos troncos de al lado, una parte más en con el pincel más mojado.
🇺🇸We do the same with the other two trunks next door, one part with the wet brush.
🇪🇸Y después le añadimos el pincel seco.
🇺🇸 And then we add the dry brush.
🇪🇸Añadimos también unas pinceladas en los troncos del fondo para imitar ese relieve, pero mucho mas suave y transparente.
🇺🇸We also add some brushstrokes on the trunks of the background to imitate that relief, but much softer and more transparent.
🇪🇸Aprovechamos ese color que hemos hecho, para de añadir también alguna rama en esos troncos, acordaros como siempre, las ramas más gruesas, más cerca del tronco, y más finas a medida que nos alejamos de él, igualmente la rama serán más finas en los árboles más pequeños y más gruesas en los árboles más grandes.
🇺🇸 We take advantage of that color that we have made, to also add some branch in those trunks, remember as always, the thicker branches, closer to the trunk, and thinner as we move away from it, also the branch will be thinner in the trees smaller and thicker in the larger trees.
🇪🇸Añadimos una última capa en la zona de los arbustos del suelo, con un color más intenso de marrón para las zonas marrones, mezclando ya ese sombra tostada con algún azul ultramar o índigo y usando el verde de White Nights para las zonas verdes más oscuras.
🇺🇸We add a last layer in the area of the shrubs of the ground, with a more intense color of brown for the brown areas, already mixing that Burnt Umber with some ultramarine blue or indigo and using the green of White Nights for the darker green areas.
🇪🇸Damos mayor intensidad de color en los relieves de la parte izquierda de los troncos para que parezca que esa zona está en sombra.
🇺🇸We add greater intensity of color in the reliefs on the left side of the trunks so that it looks like that area is in shadow.
🇪🇸Añadimos unas pinceladas de verde mas intenso en los arbustos de primer plano con verde White Nights y azul ultramar.
🇺🇸We add a few brushstrokes of more intense green in the foreground bushes with White Nights green and ultramarine blue.
🇪🇸Usamos Gouache blanco para añadir algunas ramas más claras en esos troncos, y también podemos dar un toque por el tronco, alguna raya horizontal, etc. para que tenga más relieve.
🇺🇸 We use white gouache to add some lighter branches to those trunks, and we can also give a touch to the trunk, some horizontal stripe, etc. so that it has more relief.
🇪🇸Podemos también mezclar ese Gouache blanco con verde y hacer algún verde más claro, y dar algún toque verde más claro en los arbustos.
🇺🇸We can also mix that white gouache with green and make some lighter green, and add some lighter green touch in the bushes.
🇪🇸Por último, veo que la sombra en los troncos ha bajado mucho y quedan un poco planos entonces le vuelvo a dar esa zona izquierda un poquito de esa sombra Violeta, para que nos dé más sensación de volumen en esos troncos.
🇺🇸Finally, I see that the shadow in the trunks has dropped a lot and they are a little flat so I add in that left area again a little of that Violet shadow, so that it gives us more feeling of volume in those trunks.
🇪🇸Y por último, retiraríamos la cinta y ya tendríamos nuestro bosque de abedules.
🇺🇸And finally, we would remove the tape and we would already have our birch forest.
🇪🇸Espero que se haya gustado, si tenéis cualquier duda preguntarme y si queréis podéis subirlo al grupo de Facebook para que os lo corrija.
Un abrazo, Isabel. ❤️
🇺🇸I hope you liked it, if you have any questions ask me and if you want you can upload it to the Facebook group so that I can correct it. See you in the next one.
Hugs, Isabel. ❤️