Wall Mount Dry Goods Funnel — Practical, Clean & Customer-Inspired 🛠️ (Patreon)

Originally designed for a customer, this Wall Mount Dry Goods Funnel turned out to be such a practical utility piece that I decided to make it available to Patreon members as well.

The design mounts directly to the wall and gives you a convenient way to transfer or dispense suitable dry goods and dry materials while keeping the work area organized. Its tapered body leads into a 32 mm spout opening, with a generous 155 mm top diameter for easy filling.

This is a functional design rather than a decorative one, so material choice, mounting method, print quality, and intended contents are especially important.

Product Details:

• Approx. 155 mm top diameter

• Approx. 205 mm total height

• 32 mm spout opening

• Wall-mounted design

• Requires flange-head screws

• Intended for suitable dry goods and dry materials

• 3D printable digital design

• Originally created for a customer

• Designed by Sandstorm 3D Designs in Canada

Now available on Patreon!

Important Printing Information

This is a digital 3D-printable design file, not a finished physical product.

Final print quality, strength, and dimensional accuracy will depend on your printer, nozzle, filament, calibration, layer height, wall count, infill, orientation, bed adhesion, temperature, slicer settings, and overall print quality.

Always inspect the sliced preview before printing and carefully inspect the completed funnel before mounting or filling it.

Sandstorm 3D Designs is not responsible for failed prints, wasted filament, adhesion failures, incorrect slicer settings, printer malfunctions, dimensional variation, poor layer bonding, material incompatibility, improper fit, or other printing-related losses.

Files are provided as-is, and the user is responsible for determining appropriate materials, settings, installation methods, and suitability for the intended application.

Intended Use

This design is intended for suitable dry goods and other dry materials only.

It is not intended for liquids, hot materials, corrosive substances, hazardous chemicals, pressurized applications, or other uses where failure could create a safety hazard.

The funnel does not have a certified flow rate, load rating, food-safety certification, or industrial-use certification.

Food-Contact Information

If the funnel is used with human food, pet food, or any other consumable product, the person printing and using the design is responsible for determining whether the finished print is appropriate for food-contact use.

A filament being described by its manufacturer as food-safe or food-contact suitable does not automatically make the completed FDM print food safe.

Food-contact suitability can also depend on the nozzle, printer cleanliness, previous materials used in the machine, print surface, layer lines, finishing process, cleaning method, and the filament manufacturer's recommendations.

FDM prints naturally contain layer lines and small crevices that may make thorough cleaning and sanitation more difficult.

Do not use the funnel with consumable products if you cannot properly clean and maintain the finished print.

Hand-clean using a method appropriate for the selected filament and allow the funnel to dry completely before refilling.

Do not place the printed funnel in a dishwasher or expose it to excessive heat unless the selected material and finishing process have specifically been determined suitable for those conditions.

Sandstorm 3D Designs does not certify this product as food safe, food grade, or suitable for any particular consumable product.

Mounting & Load Safety

The funnel is designed to attach to the wall using flange-head screws.

Mounting screws, anchors, and installation hardware are not included unless specifically stated otherwise.

The installer is responsible for selecting mounting hardware appropriate for:

the wall material, the printed funnel, and the expected weight of the contents when the funnel is filled.

Drywall, wood, masonry, and other wall materials may require different mounting methods. Drywall installations may require appropriate anchors or attachment to structural framing depending on the expected load.

This design does not have a tested or certified maximum weight capacity.

Do not overload the funnel.

Before filling it, make sure the mounting points are secure and inspect the finished print for cracks, weak layers, warping, loose hardware, or other signs of weakness.

Discontinue use immediately if the funnel or mounting system becomes loose, cracked, warped, damaged, or unstable.

Sandstorm 3D Designs is not responsible for spilled contents, falling objects, wall damage, property damage, injury, or other losses caused by improper mounting, unsuitable hardware, overloading, unsuitable materials, print failure, or misuse.

Filament & Care

Choose a filament appropriate for the contents, temperature, environment, and intended use.

PLA may be suitable for some normal indoor dry-material applications but can soften or deform when exposed to excessive heat or prolonged direct sunlight.

PETG or another suitable material may provide additional durability, moisture resistance, or temperature resistance depending on the application.

Always follow the filament manufacturer's recommendations for printing, temperature exposure, cleaning, and intended use.

Included / Not Included

The Patreon download includes the applicable digital Wall Mount Dry Goods Funnel file(s) described in the post.

A finished physical funnel is not included with the digital-file download.

Flange-head screws, wall anchors, mounting hardware, containers, food, dry goods, tools, and other accessories shown in promotional material are not included unless specifically stated otherwise.

File & Commercial-Use Terms

Files are for personal use only unless you have an active qualifying Sandstorm 3D Designs commercial membership or license.

Where permitted by the applicable membership, authorized physical 3D-printed copies may be sold.

Digital files may not be resold, shared, redistributed, transferred, uploaded, supplied to another person, or given away, whether modified or unmodified.

Anyone selling physical prints is responsible for their own print quality, material selection, mounting instructions, food-contact representations, safety information, final inspection, packaging, and customer support.

A seller should not represent the finished product as food safe, food grade, dishwasher safe, or suitable for a specific load unless they have independently established that claim for their own finished product and printing process.