Sandstorm 3D Designs Original Boujee Lamp — Spooky-Chic Statement Décor 👻🧡 (Patreon)

Meet the Sandstorm 3D Designs Original Boujee Lamp — a full-size decorative lamp that brings the Boujee style into a completely new kind of design.

Standing approximately 430 mm tall, this piece combines the familiar Boujee ghost styling with a functional illuminated lampshade to create a large statement piece for Halloween displays, desks, shelves, side tables, or anywhere you want a little spooky personality.

The lamp is designed to use a rechargeable or battery-operated puck light up to 80 mm in diameter, so there is no need to build a traditional wired lamp fixture into the printed model.

An adapter is included with the digital files to help accommodate the intended puck-light setup.

Features:

• Original Sandstorm 3D Designs creation

• Approx. 430 mm tall

• Designed for a rechargeable or battery-operated puck light up to 80 mm

• Puck-light adapter included

• Decorative illuminated lampshade

• Detailed Boujee ghost base

• Multicolor-ready 3D printable design

• Large statement piece for Halloween or year-round spooky décor

• Designed by Sandstorm 3D Designs in Canada

• Commercial-use tiers available subject to membership terms

Now available on Patreon!

Important Printing Information

This is a digital 3D-printable design.

Final print quality and fit may vary depending on printer, nozzle, filament, calibration, layer height, wall settings, infill, orientation, supports, bed adhesion, color-change setup, and slicer profile.

Because this is a larger assembled design, always inspect the sliced preview carefully before printing and check all mating surfaces and assembled components before use.

The lamp stands approximately 430 mm tall when assembled, so members should also confirm that the individual parts fit within their printer’s usable build volume before beginning.

The 80 mm measurement refers to the maximum intended puck-light diameter. Actual puck-light dimensions and housings can vary between manufacturers, so always measure your light before printing and test the fit before final assembly.

Sandstorm 3D Designs is not responsible for failed prints, wasted filament, support failures, adhesion problems, color-change issues, incorrect slicer settings, printer malfunctions, dimensional variation, improper puck-light fit, assembly problems, or other printing-related losses.

Files are supplied as-is, and the user is responsible for choosing suitable materials, printer settings, lighting components, assembly methods, and final use.

Filament & Care

PLA is generally suitable for decorative indoor use, but it can soften or deform when exposed to excessive heat, prolonged direct sunlight, or other high-temperature environments.

Because this design contains a light source, filament selection should take the operating temperature of the chosen puck light into consideration.

Use only a cool-running rechargeable or battery-operated LED puck light that remains within temperatures suitable for the filament used.

PETG or another more temperature-resistant material may be preferable depending on the chosen light, environment, and intended use.

Normal FDM characteristics such as visible layer lines, small dimensional differences, color variation, and surface variation should be expected.

Clean the finished lamp gently using a soft cloth. Avoid excessive heat, harsh chemicals, and moisture around the light or electronic components.

Lighting, Heat & Electrical Safety

This design is intended for use with a rechargeable or battery-operated puck light up to 80 mm in diameter.

It is not designed to hold a candle, open flame, incandescent bulb, halogen bulb, heating element, or other high-temperature light source.

Never place an open flame inside or near the printed lamp.

The finished 3D-printed lamp is not a certified electrical fixture and has not been tested or approved by an electrical safety authority.

Users are responsible for selecting an appropriate puck light and following the puck-light manufacturer’s operating, charging, battery, ventilation, and safety instructions.

Before extended use, monitor the printed parts around the light for excessive heat, softening, discoloration, warping, or other changes.

Stop using the lamp immediately if:

• The printed material becomes unusually warm

• Warping or softening occurs

• The puck light or battery becomes excessively hot

• The light becomes damaged

• Any printed component cracks, loosens, or becomes unstable

Do not leave the light operating unattended for extended periods until you have confirmed that your particular puck light, filament, and finished print remain within safe operating temperatures.

Safety & Intended Use

The Boujee Lamp is intended as a decorative indoor display item.

Place the finished lamp on a stable, level surface where it cannot easily be knocked over.

Keep it away from open flames, heaters, fireplaces, cooking appliances, excessive moisture, and other heat sources.

Inspect the finished print and assembly regularly. Discontinue use if you notice cracks, poor layer bonding, loose components, deformation, or instability.

Small or detachable printed parts may present a choking hazard. Keep away from young children and pets where appropriate.

Included / Not Included

The Patreon download includes the applicable digital Boujee Lamp file(s) along with the intended puck-light adapter.

Unless specifically stated otherwise:

The rechargeable/battery-operated puck light, batteries, charger, charging cable, and other decorative or photographic accessories are not included.

A finished physical lamp is not included with the digital-file download.

File & Commercial-Use Terms

Files are for personal use only unless you have an active qualifying Sandstorm 3D Designs commercial membership or license.

Where permitted by the applicable membership, authorized physical 3D-printed copies may be sold.

Digital files may not be resold, shared, redistributed, transferred, uploaded, supplied to another person, or given away, whether modified or unmodified.

Anyone selling physical prints is responsible for:

• Print and assembly quality

• Material selection

• Puck-light compatibility

• Final inspection

• Heat and electrical safety information

• Proper customer warnings

• Packaging and customer support

• Compliance with applicable consumer-product requirements

A seller should not represent the finished lamp as an approved or certified electrical fixture unless they have independently obtained the applicable certification for their own finished product.