Sandstorm Original BBQ Caddy — One Caddy, Endless Possibilities 🔥🍔 (Patreon)

Meet the Sandstorm 3D Designs Original BBQ Caddy — a practical, modular organizer designed to bring a little more organization and a lot more personality to your BBQ setup.

What makes this one different is the ability to change its look whenever you want. The front uses interchangeable BBQ Caddy Art Plates, so you can swap your design for the season, a holiday, a special occasion, or simply keep your favorite artwork on display year-round.

The caddy is also designed as an expandable system, with side accessory holders that can be added as new accessories become available.

For mounting, the BBQ Caddy uses two 10 mm magnets to help attach it to a compatible metal BBQ side shelf — keeping the caddy conveniently within reach while you're cooking or entertaining.

One caddy, changing artwork, expandable accessories, and plenty more possibilities to come.

Features:

• Original Sandstorm 3D Designs creation

• Functional BBQ and outdoor-entertaining organizer

• Interchangeable BBQ Caddy Art Plates

• Change the front design for seasons, holidays, themes, or personal favorites

• Uses two 30mmx3mm magnets for attachment to a compatible metal BBQ side shelf

• Designed for interchangeable side accessory holders

• Side accessory holders use a secure, snug press-fit connection

• Modular design intended to expand with future accessories and Art Plates

• Great for organizing appropriate lightweight BBQ essentials

• Multicolor-ready 3D printable design

• Designed by Sandstorm 3D Designs in Canada

• Commercial-use tiers available subject to membership terms

Now available on Patreon!

Important Printing Information

This is a digital 3D-printable design.

Side Accessory Holders need to be tapped in with a small rubber hammer for a snug fit. This is normal as they should be snug.

Final print quality, strength, and component fit can vary depending on printer, nozzle, filament, calibration, layer height, wall settings, infill, orientation, bed adhesion, temperature, color-change setup, and slicer profile.

Because this design contains interchangeable and press-fit components, always inspect the sliced preview carefully before printing.

Normal FDM tolerances can affect the fit of the BBQ Caddy Art Plates, magnet pockets, and side accessory holders.

Do not force components together if the fit is clearly incorrect. Elephant foot, filament shrinkage, printer calibration, or dimensional variation can all affect tolerances.

Sandstorm 3D Designs is not responsible for failed prints, wasted filament, adhesion failures, color-change issues, incorrect slicer settings, printer malfunctions, dimensional variation, incorrect magnet fit, improper Art Plate fit, accessory-fit issues, or other printing-related losses.

Files are supplied as-is, and the user is responsible for selecting appropriate materials, settings, magnets, assembly methods, and final use.

Filament & Care

Because this product is intended for use around a BBQ area, heat exposure should be taken seriously.

PLA may be suitable for moderate-temperature use away from the grill itself, but it can soften or deform when exposed to high temperatures, prolonged direct sunlight, or hot metal surfaces.

PETG or another suitable heat-resistant material may be preferable depending on the environment and intended placement.

Regardless of material:

• Keep the caddy away from direct flame.

• Do not place it on burners or excessively hot surfaces.

• Keep it away from hot cookware and grilling tools.

• Do not leave it where radiant heat from the BBQ can soften or deform the print.

• Follow the filament manufacturer's temperature recommendations.

Clean using a method suitable for the filament used.

Do not place the finished caddy or accessories in a dishwasher unless the material and finished product have specifically been determined suitable for dishwasher temperatures.

Magnetic Attachment

The BBQ Caddy is designed to use two 30mmx3mm magnets to help attach it to a compatible metal BBQ side shelf.

Before use, confirm that your BBQ shelf is made from a material the magnets can securely attract to.

The user is responsible for selecting magnets that properly fit the model and are suitable for the intended environment.

Make sure both magnets are completely seated and securely retained before attaching the caddy to the BBQ.

Check the magnetic attachment before loading the caddy with accessories.

Do not rely on the magnets if:

• The BBQ surface is non-magnetic

• The attachment feels weak or unstable

• A magnet is loose

• The printed magnet pocket is cracked or damaged

• The caddy can easily slide or detach

Magnets can have their own temperature limitations, so follow the magnet manufacturer's specifications and keep them away from excessive BBQ heat.

Magnets are not included unless specifically stated otherwise.

Small magnets can present a serious swallowing hazard. Keep loose magnets away from children and pets and discontinue use immediately if a magnet becomes loose or exposed.

BBQ Caddy Art Plates

The interchangeable BBQ Caddy Art Plate system is one of the main features of this design.

Art Plates can be changed to suit:

• Different seasons

• Holidays

• BBQ themes

• Special occasions

• Personalized artwork

• Favorite everyday designs

This allows you to keep using the same BBQ Caddy while changing its personality whenever you feel like something different.

Always make sure the Art Plate is properly seated before moving or handling the caddy.

Only Art Plates specifically identified as compatible with the Sandstorm Original BBQ Caddy should be assumed to fit this system.

Side Accessory Holder Installation

The BBQ Caddy has been designed to support interchangeable side accessory holders.

These holders use an intentionally snug press-fit connection.

During installation, the accessory holder may need to be gently tapped into place with a small rubber hammer or rubber mallet to achieve the intended snug fit.

Do not use a metal hammer directly against the printed components.

When installing:

• Support the main caddy securely.

• Align the accessory correctly before applying force.

• Use gentle, controlled taps.

• Use only enough force to seat the accessory.

• Stop immediately if the printed part begins cracking, splitting, or deforming.

Because printer calibration and filament shrinkage vary, an accessory that fits perfectly on one printer may be tighter or looser on another.

If excessive force is required, stop and inspect the fit rather than continuing to hammer the component into place.

Future side accessory holders are not automatically included with the initial BBQ Caddy release unless they are specifically identified as part of that download.

BBQ & Heat Safety

The BBQ Caddy is intended as an organizer for the BBQ area.

It is not a heat-resistant component of the grill itself.

Do not place the caddy:

• On a cooking grate

• On a burner

• Over an open flame

• Against a hot BBQ lid or housing

• On a side shelf that has become excessively hot

• Where hot grease, sparks, charcoal, or other high-temperature materials may contact it

Do not place hot utensils, skewers, pans, grill grates, or other items carrying significant residual heat directly into or against the printed caddy unless you have independently determined that your selected material is suitable for those temperatures.

Inspect the caddy periodically for softening, warping, cracking, loose magnets, or other damage.

Discontinue use if deterioration occurs.

Food-Contact Information

The finished BBQ Caddy is not automatically certified for direct food contact.

It is best suited to organizing items such as wrapped or packaged condiments, napkins, utensils, tools, and other appropriate BBQ accessories.

Do not place unpackaged food directly against the printed surfaces unless you have independently determined that your complete printing process and chosen materials are suitable for food-contact use.

A filament being marketed as food-contact suitable does not automatically make the completed FDM print food safe.

Sandstorm 3D Designs does not certify this product as food safe or food grade.

Safety & Intended Use

Inspect the finished caddy, magnets, Art Plate, and accessory holders before use.

Do not use the product if you notice:

• Cracks

• Poor layer bonding

• Warping

• Loose magnets

• Damaged attachment areas

• Excessive movement

• Sharp or broken edges

The BBQ Caddy is intended for light-duty organization, not heavy loads or safety-critical applications.

Always remove or secure loose items before moving the BBQ.

Included / Not Included

The Patreon download includes the applicable digital Sandstorm Original BBQ Caddy file(s) and any BBQ Caddy Art Plate or accessory files specifically identified as part of the release.

Unless specifically stated otherwise, the following are not included:

Two 10 mm magnets, BBQ utensils, cutlery, napkins, condiment bottles, sauces, food, plates, grilling equipment, tools, future BBQ Caddy Art Plates, future side accessory holders, and promotional/decorative props.

A finished physical BBQ Caddy is not included with the digital-file download.

File & Commercial-Use Terms

Files are for personal use only unless you have an active qualifying Sandstorm 3D Designs commercial membership or license.

Where permitted under the applicable membership, authorized physical 3D-printed copies may be sold.

Digital files may not be resold, shared, redistributed, transferred, uploaded, supplied to another person, or given away, whether modified or unmodified.

The Sandstorm Original BBQ Caddy, its base components, attachment system, and original Sandstorm artwork remain the intellectual property of Sandstorm 3D Designs.

Anyone selling physical prints is responsible for:

• Print quality

• Material selection

• Magnet selection and installation

• Art Plate fit

• Accessory-holder fit

• Final inspection

• Heat and safety warnings

• Customer information

• Packaging and customer support

• Compliance with applicable consumer-product requirements

Third-Party Artwork & IP Responsibility

The BBQ Caddy itself is a Sandstorm 3D Designs original creation.

Individual BBQ Caddy Art Plates may have different intellectual-property considerations depending on the artwork used.

A Sandstorm commercial membership can only grant commercial rights to intellectual property that Sandstorm 3D Designs owns or is authorized to license.

If an Art Plate contains a third-party character, sports logo, trademark, brand name, artwork, or other protected material, those rights remain with their respective owners.

A Sandstorm membership does not grant permission to commercially use third-party intellectual property, and a disclaimer does not create those rights.