Fridge Can Slider — A Simple Way to Keep Your Drinks Organized 🥤❄️ (Patreon)

Keep your favorite drinks organized, easy to see, and easy to grab with the Fridge Can Slider from Sandstorm 3D Designs.

This functional fridge organizer was designed to help keep canned drinks together instead of having them scattered around the shelf. The open layout makes it easy to load your cans, see what you have left, and keep different sizes arranged neatly.

The design accommodates several common can sizes, making it useful for pop, sparkling water, energy drinks, and other compatible canned beverages.

Large format printer needed to print this item!

Capacity shown per row:

• 5 slim cans

• 4 standard 355 ml cans

• 3 larger 473 ml cans

Features:

• Functional 3D-printable refrigerator organizer

• Designed for multiple common beverage-can sizes

• Holds up to 5 slim cans per row

• Holds up to 4 × 355 ml cans per row

• Holds up to 3 × 473 ml cans per row

• Helps keep refrigerator shelves organized

• Open design for easy access and visibility

• Designed by Sandstorm 3D Designs in Canada

• Patreon First

• Commercial-use tiers available subject to membership terms

Now available on Patreon!

Important Printing Information

This is a digital 3D-printable design.

Because this product is intended to support multiple filled beverage cans, print quality, layer adhesion, material choice, wall strength, and overall structural integrity are extremely important.

Final strength and dimensions can vary depending on printer, nozzle, filament, calibration, layer height, wall count, infill, orientation, temperatures, cooling, bed adhesion, and slicer settings.

Always inspect the sliced preview carefully before printing.

Pay particular attention to:

• Base strength

• Side-wall strength

• Layer bonding

• Can openings and clearances

• Overall flatness

• Joint or connection areas where applicable

• Any areas that will carry the weight of multiple full cans

Normal FDM dimensional variation can affect can fit.

Test the finished organizer carefully before loading it fully.

Sandstorm 3D Designs is not responsible for failed prints, wasted filament, poor layer adhesion, dimensional variation, improper fit, breakage, incorrect slicer settings, printer malfunctions, material failure, refrigerator damage, spilled beverages, broken shelves, property damage, injury, or other losses resulting from printing, installation, loading, or use of this product.

Files are supplied as-is.

The person printing and using the design is responsible for determining whether the finished product is suitable for their printer, filament, refrigerator, shelf, beverage containers, and intended use.

Filament Selection — Important

Because this product will be used in a cold refrigerator environment while supporting the weight of multiple cans, filament selection matters.

PLA may print easily and may work for some users, but it can become more brittle than other materials and may be less forgiving if the organizer is dropped, flexed, overloaded, or repeatedly handled.

For this type of functional refrigerator organizer, PETG or another suitably tough, moisture-resistant filament may be a better choice depending on your printer and environment.

Whatever filament you choose:

• Use a material with good layer adhesion.

• Make sure the filament is suitable for the temperatures in your refrigerator.

• Consider the weight of fully loaded beverage cans.

• Account for moisture and condensation inside the fridge.

• Follow the filament manufacturer’s recommended printing and use temperatures.

• Do not assume a material is appropriate simply because the print completed successfully.

The final choice of filament and print settings is the responsibility of the person producing the item.

Refrigerator Fit & Clearance

Refrigerators vary greatly in shelf depth, shelf width, door clearance, shelf construction, and internal layout.

Before printing, measure the area where you plan to use the organizer and make sure there is enough space for:

• The organizer itself

• The intended cans

• Loading and removing cans

• Closing the refrigerator door

• Drawers, hinges, vents, and surrounding shelves

Make sure the organizer sits fully and securely on a stable refrigerator shelf.

Do not position it where it interferes with the refrigerator door, drawer operation, vents, cooling components, or other internal mechanisms.

Can Size & Compatibility

Can dimensions vary between beverage manufacturers even when the listed volume is the same.

The capacities shown are based on the intended common can formats:

5 slim cans per row • 4 standard 355 ml cans per row • 3 larger 473 ml cans per row

Actual fit may vary depending on the diameter and shape of the specific beverage container.

Do not force oversized cans into the organizer.

If cans bind, lean excessively, or do not sit properly, discontinue use with that particular container size.

Weight & Shelf Safety

A fully loaded organizer can become surprisingly heavy.

Always make sure the refrigerator shelf being used is capable of safely supporting:

• The printed organizer

• All loaded beverage cans

• Any other items sharing the shelf

Do not exceed the refrigerator manufacturer’s shelf-load recommendations.

Do not overload the organizer beyond its intended capacity.

Keep the organizer completely supported by the refrigerator shelf. Do not allow any portion carrying weight to hang unsupported over the edge.

Sandstorm 3D Designs does not certify refrigerator shelves, shelving systems, or the finished printed organizer for any specific weight capacity.

Safety & Intended Use

The Fridge Can Slider is intended for light-duty organization of compatible canned beverages inside a refrigerator.

Before use:

• Inspect the print for cracks or poor layer bonding.

• Make sure the organizer sits flat and stable.

• Test can fit before fully loading it.

• Confirm that the refrigerator shelf can support the total load.

• Load cans carefully and evenly.

• Check periodically for cracking, deformation, or wear.

Discontinue use immediately if the print develops:

• Cracks

• Splitting

• Poor layer adhesion

• Significant warping

• Sharp edges

• Structural deformation

• Loose or damaged sections

Do not drop, throw, stand on, sit on, or use the organizer for purposes other than its intended beverage-storage function.

Not Intended for Freezer Use

Unless the chosen filament and finished print have been independently verified for those temperatures, do not assume this organizer is suitable for freezer use.

Very low temperatures can affect the behavior and brittleness of some 3D-printing materials.

Cleaning & Moisture

Refrigerators naturally produce condensation and occasional spills.

Clean the organizer regularly and dry it thoroughly.

Use cleaning methods appropriate for the filament you selected.

Avoid very hot water, dishwashers, or harsh chemicals unless the material and finished print have specifically been determined suitable for those conditions.

Food-Contact Information

This organizer is intended to hold sealed beverage cans.

It is not certified as a food-contact surface and should not be represented as food safe unless the complete printing process and material have been independently determined suitable for that purpose.

Do not place unpackaged food directly on the printed organizer.

Included / Not Included

The Patreon download includes the applicable digital Fridge Can Slider file(s) described in the release.

Unless specifically stated otherwise:

Beverage cans, drinks, refrigerator, shelving, food, and other promotional items shown in the advertisement are not included.

A finished physical Fridge Can Slider is not included with the digital-file download.

File & Commercial-Use Terms

Files are for personal use only unless you have an active qualifying Sandstorm 3D Designs commercial membership or separate commercial license.

Where permitted under the applicable membership, authorized finished physical 3D-printed copies may be sold.

Digital files may not be resold, shared, redistributed, transferred, uploaded, supplied to another person, or given away, whether modified or unmodified.

Anyone producing or selling finished physical organizers is responsible for:

• Print quality

• Filament selection

• Structural integrity

• Can compatibility

• Refrigerator compatibility

• Shelf compatibility

• Functional testing

• Final inspection

• Appropriate customer instructions and warnings

• Packaging and customer support

• Compliance with applicable consumer-product requirements

Important Responsibility Disclaimer

Sandstorm 3D Designs provides the digital design only.

Sandstorm 3D Designs does not manufacture, inspect, install, certify, or control the finished product printed by the end user or commercial seller.

The person printing, selling, installing, loading, or using the Fridge Can Slider assumes responsibility for:

material selection, printer settings, print quality, refrigerator compatibility, shelf strength, can compatibility, loading, placement, maintenance, inspection, and safe use.

Sandstorm 3D Designs is not responsible for broken prints, falling or rolling cans, spilled beverages, damaged refrigerator shelves, damage to appliances, property damage, personal injury, or other loss arising from the manufacture, installation, loading, failure, or use of the finished product.