Fridge Can Slider — Small Version | Compact Organization for Smaller Printers 🥤❄️ (Patreon)

The Fridge Can Slider — Small Version from Sandstorm 3D Designs brings the same simple fridge-organization idea into a more compact format that’s easier to print on smaller 3D printers.

This version is designed specifically around 473 mL soda cans, holding 3 cans per row while helping keep drinks lined up, organized, and easier to grab from the fridge.

It’s a great option for anyone who wants the functionality of our larger Fridge Can Slider but doesn’t have the build volume available for the bigger version — or simply wants a smaller setup that takes up less refrigerator space.

Features:

• 3D-printable Fridge Can Slider — Small Version

• Designed for 473 mL soda cans

• Holds 3 cans per row

• Compact format designed to fit on smaller 3D printers

• Helps keep canned drinks organized and easier to access

• Low-profile fridge-friendly design

• Simple functional construction

• Great for home refrigerators, drink fridges, workshops, offices, and recreation spaces

• Designed by Sandstorm 3D Designs in Canada

• Commercial-use tiers available subject to membership terms

Now available on Patreon!

Important Printing Information

This is a digital 3D-printable functional design.

Final print quality, can fit, strength, flatness, and overall performance may vary depending on printer, nozzle, filament, calibration, layer height, wall count, infill, top and bottom layers, bed adhesion, orientation, and slicer settings.

Although this smaller version is designed specifically to make printing easier on machines with more limited build volumes, always verify the model dimensions against your printer’s usable build area before starting the print.

Always inspect the sliced preview carefully.

Pay particular attention to:

• Can openings and guides

• Bottom-layer strength

• Side walls

• Front stop

• Row alignment

• Overall flatness

• Layer adhesion

• Areas carrying the weight of the cans

Normal FDM characteristics such as visible layer lines, seams, slight dimensional variation, and minor surface differences should be expected.

Sandstorm 3D Designs is not responsible for failed prints, wasted filament, warping, adhesion failures, dimensional variation, incorrect slicer settings, printer malfunctions, poor layer bonding, improper can fit, breakage, refrigerator damage, or other printing-related losses.

Files are supplied as-is, and the user is responsible for selecting suitable materials, printer settings, refrigerator placement, and final use.

473 mL Can Fit & Compatibility

This small version is designed around 473 mL beverage cans, with space for 3 cans per row.

However, beverage cans can vary slightly in:

• Diameter

• Height

• Rim design

• Bottom profile

• Manufacturer tolerances

• Country or region of sale

For that reason, always test the finished print with the specific cans you intend to use.

Do not force an oversized or incompatible can into the holder.

Printer calibration, filament shrinkage, scaling, and normal FDM dimensional tolerances may affect final fit.

Commercial sellers should test the finished product with the exact can size they intend to advertise as compatible before offering the item for sale.

Designed for Smaller Printers

One of the main advantages of this version is its reduced overall size, making the Fridge Can Slider accessible to users who may not have a large-format build plate.

Before printing, confirm:

• The model fits completely within your usable build area.

• No portion extends outside the printable region.

• The slicer has not automatically rescaled the model.

• Any required orientation still provides adequate strength.

Avoid automatically shrinking the model simply to fit a printer, because changing the scale will also change the can openings and may prevent proper fit.

Filament Selection

Material selection matters because this product is expected to support the combined weight of multiple beverage cans for extended periods.

PLA may be suitable for many normal refrigerator environments, but final performance depends heavily on print quality, wall thickness, layer adhesion, and the specific filament used.

For additional toughness and impact resistance, PETG may be a good option depending on your printer and settings.

Whatever filament you choose:

• Use quality filament from a reputable manufacturer.

• Follow the filament manufacturer’s temperature recommendations.

• Ensure strong layer adhesion.

• Avoid under-extrusion.

• Inspect the print before loading it with cans.

• Do not use a print showing cracks, weak layers, warping, or incomplete sections.

No filament choice can compensate for a poorly printed or damaged part.

Cold Temperature & Refrigerator Use

Typical household refrigerator temperatures are generally much lower than the heat conditions that cause common printing plastics to soften, but the refrigerator environment introduces other considerations.

Cold temperatures, condensation, repeated loading, and handling can all affect a finished print over time.

Inspect periodically for:

• Cracking

• Brittleness

• Layer separation

• Warping

• Damage around the can openings

• Wear at the front stop

• Changes in fit

If the print becomes cracked, weakened, or damaged, discontinue use.

Condensation & Moisture

Cold cans naturally create condensation.

Water may collect on the cans, inside the holder, or on the refrigerator shelf.

Because of this:

• Check underneath the holder periodically.

• Wipe away accumulated condensation.

• Keep refrigerator surfaces clean and dry.

• Allow the holder to dry completely during cleaning.

• Do not allow standing water to remain trapped against the print for extended periods.

Condensation may also make cans and surrounding surfaces slippery, so use care when removing or loading beverages.

Weight & Load Safety

Three full 473 mL cans create a meaningful amount of weight.

The finished holder must be printed with adequate strength to safely support the intended load.

Before loading the holder:

• Inspect the bottom and side walls.

• Check for layer separation.

• Make sure the holder sits completely flat.

• Confirm the refrigerator shelf can safely support the cans and holder.

• Load cans gently rather than dropping them into position.

Do not use the holder to support objects significantly heavier than the beverage cans it was designed for.

No specific load rating is guaranteed, because Sandstorm 3D Designs cannot control filament choice, printer calibration, wall count, infill, print orientation, or finished-print quality.

Refrigerator Shelf Safety

Always place the Fridge Can Slider on a stable, level refrigerator shelf.

Use additional care when placing it on glass shelving.

Make sure:

• The refrigerator shelf is properly installed.

• The shelf is rated to support the combined weight.

• The holder sits fully on the shelf.

• No portion hangs over the shelf edge.

• The holder cannot slide or tip when cans are removed.

• The holder does not interfere with refrigerator doors, drawers, vents, or moving components.

Do not place the holder where falling cans could strike glass shelves, refrigerator components, or people.

Sandstorm 3D Designs is not responsible for refrigerator, shelf, appliance, or property damage caused by improper placement, excessive weight, failed prints, or misuse.

Food & Beverage Safety

The Fridge Can Slider is intended to hold sealed commercial beverage cans.

It is not intended to directly contain food or beverages.

Do not pour beverages directly into the printed holder.

Sandstorm 3D Designs does not certify the finished 3D print as food safe or approved for direct food-contact use.

The user is responsible for material selection, printer cleanliness, cleaning procedures, and determining suitability for the intended environment.

Cleaning & Care

For normal cleaning:

• Remove all cans before cleaning.

• Hand-clean using mild soap and cool or lukewarm water.

• Use a soft cloth or sponge.

• Dry thoroughly before returning it to the refrigerator.

• Avoid harsh chemicals unless compatible with the selected filament.

• Avoid boiling water.

• Do not place in a dishwasher unless the chosen material and finished print have independently been determined suitable for those temperatures.

Regular cleaning is especially important because condensation can collect dust, spills, and refrigerator residue.

Safety & Intended Use

The Fridge Can Slider — Small Version is intended as a light-duty refrigerator organization accessory for compatible canned beverages.

Before use and periodically afterwards, inspect for:

• Cracks

• Sharp damaged edges

• Layer separation

• Warping

• Excessive flexing

• Loose or damaged sections

• Loss of stability

Discontinue use immediately if the holder shows signs of structural damage.

Do not use the holder as:

• A step

• A shelf

• A seat

• A carrying tray

• A structural support

• A child’s toy

• A container for loose food or liquids

Keep broken pieces away from children and pets.

Included / Not Included

The Patreon download includes the applicable digital Fridge Can Slider — Small Version file(s) described in the release.

Unless specifically stated otherwise:

Beverage cans, drinks, refrigerator, shelving, food, decorative props, and other promotional accessories are not included.

A finished physical Fridge Can Slider is not included with the digital-file download.

File & Commercial-Use Terms

Files are for personal use only unless you have an active qualifying Sandstorm 3D Designs commercial membership or separate commercial licence.

Where permitted under the applicable membership, authorised finished physical 3D-printed copies may be sold.

Digital files may not be resold, shared, redistributed, transferred, uploaded, supplied to another person, or given away, whether modified or unmodified.

The underlying model and original Sandstorm design remain the intellectual property of Sandstorm 3D Designs.

Anyone selling finished physical Fridge Can Sliders is responsible for:

• Print quality

• Material selection

• Structural integrity

• Can-size compatibility

• Dimensional accuracy

• Final inspection

• Appropriate customer warnings

• Refrigerator-use instructions

• Cleaning and care information

• Packaging and customer support

• Compliance with applicable consumer-product requirements

Sellers should clearly state that compatibility is based on the advertised 473 mL can size and should test their own finished prints before making compatibility claims.

Product Responsibility

By printing, selling, installing, loading, or using this design, the user or seller accepts responsibility for material selection, printer settings, print quality, structural integrity, can compatibility, refrigerator shelf suitability, final inspection, cleaning, maintenance, and safe use.

Sandstorm 3D Designs is not responsible for failed or weakened prints, broken holders, falling cans, spilled beverages, refrigerator damage, shelf damage, property damage, personal injury, or other losses resulting from manufacture, material selection, installation, loading, handling, or use of the finished product.