Philadelphia Candle Holder — Bold Football-Inspired Style for Your Space 🏈 (Patreon)

Bring some bold Philadelphia football energy to your décor with the Philadelphia Candle Holder from Sandstorm 3D Designs.

This design combines a strong black, green, white, and orange colour palette with football-inspired artwork and a city-style backdrop for a display piece that definitely stands out.

Whether it’s sitting in a game room, office, fan cave, desk area, or seasonal display, the Philadelphia Candle Holder adds plenty of personality while giving you a decorative place for a compatible candle container.

Features:

• 3D-printable Philadelphia Candle Holder

• Bold football-inspired design

• Philadelphia city-style artwork

• Multicolour-ready model

• Decorative candle-holder format

• Great for game rooms, offices, desks, shelves, and fan spaces

• Designed by Sandstorm 3D Designs in Canada

• Commercial-use tiers available subject to the third-party intellectual-property limitations below

Now available on Patreon!

Important Printing Information

This is a digital 3D-printable candle-holder design.

Final print quality, dimensional accuracy, stability, candle fit, and overall appearance may vary depending on printer, nozzle, filament, calibration, layer height, wall settings, infill, top and bottom layers, bed adhesion, colour-change setup, orientation, and slicer profile.

Always inspect the sliced preview carefully before printing.

Pay particular attention to:

• Candle-supporting areas

• Base flatness

• Artwork details

• Thin decorative areas

• Layer adhesion

• Raised or recessed sections

• Colour-change placement

• Overall balance and stability

Normal FDM characteristics such as visible layer lines, seams, slight dimensional variation, and minor colour or surface differences should be expected.

Sandstorm 3D Designs is not responsible for failed prints, wasted filament, warping, adhesion failures, colour-change problems, dimensional variation, incorrect slicer settings, printer malfunctions, improper candle fit, instability, heat-related deformation, or other printing-related losses.

Files are supplied as-is, and the user is responsible for selecting suitable materials, printer settings, candle type, placement, and final use.

Filament & Heat Considerations

Material selection is especially important for any 3D-printed product used around candles or other heat sources.

PLA may soften or deform when exposed to elevated temperatures and should be used with particular caution around candles, fireplaces, heaters, direct sunlight, or other heat-producing environments.

PETG, ASA, ABS, or another more temperature-resistant filament may offer improved heat resistance depending on your printer and setup, but no common 3D-printing filament should automatically be considered fireproof, flame-resistant, or safe for unrestricted candle use.

Regardless of material:

• Keep printed plastic away from direct flame.

• Do not allow a flame to contact the printed holder.

• Monitor the temperature of the finished print during use.

• Stop using the holder if it softens, warps, cracks, discolours, or changes shape.

• Never assume that a successful print automatically makes the finished item safe around heat.

Candle, Heat & Fire Safety — Important

The Philadelphia Candle Holder requires extra care because it is intended for use around a candle or candle container.

The 3D-printed holder must never come into direct contact with an exposed flame.

If using a real candle:

• Use only an appropriately enclosed candle or candle container.

• Maintain adequate clearance between the flame, heated candle container, hot wax, and all printed surfaces.

• Make sure the candle sits securely and cannot tip, slide, or fall.

• Place the holder on a stable, level, heat-resistant surface.

• Keep away from curtains, paper, fabric, decorations, shelving clutter, and other combustible materials.

• Keep away from drafts.

• Never move the holder while the candle is burning or while the container is hot.

• Never leave a burning candle unattended.

• Keep away from children and pets.

Sandstorm 3D Designs does not certify this model as fireproof, flame-resistant, heatproof, or safe with every candle, candle container, filament, environment, or installation.

The user is responsible for determining whether the chosen filament, candle, container, clearances, and surrounding environment are appropriate for safe use.

Where practical, a flameless battery-operated candle may provide a lower-risk decorative option.

Candle Fit & Compatibility

Candles and candle containers vary in diameter, height, weight, shape, construction, and operating temperature.

Always test the finished holder with the specific candle or container you intend to use before lighting anything.

Do not force an oversized candle or container into the holder.

The candle or container should sit securely without excessive rocking, leaning, or instability.

Normal FDM tolerances, filament shrinkage, scaling, and printer calibration may affect final fit.

If the candle does not sit safely and securely, do not use it with the printed holder.

Commercial sellers should test the exact candle or container they intend to advertise as compatible before making any compatibility claims.

Stability & Placement

Before use, place the finished candle holder on a flat, stable, heat-resistant surface.

Check that:

• The base sits flat.

• The candle or container is centred and stable.

• The holder does not rock or tip.

• Decorative features do not interfere with the candle.

• The candle can be removed safely.

• Adequate clearance exists around all printed surfaces.

Do not use the holder on unstable shelves, soft fabric surfaces, uneven furniture, or other locations where it could tip, slide, or fall.

Safety & Intended Use

The Philadelphia Candle Holder is intended as a decorative candle-display accessory.

Inspect the finished print before every use.

Discontinue use immediately if you notice:

• Cracking

• Warping

• Heat deformation

• Discolouration

• Sharp damaged edges

• Poor layer bonding

• Loose printed sections

• Loss of stability

If the model has been exposed to excessive heat, do not continue using it simply because it has cooled. Heat exposure may have permanently weakened or distorted the print.

This product is not a toy.

Keep the holder, candle, and any broken pieces away from young children and pets.

Included / Not Included

The Patreon download includes the applicable digital Philadelphia Candle Holder file(s) described in the release.

Unless specifically stated otherwise:

Candle, candle jar or container, matches, lighter, decorative props, sports memorabilia, and other promotional accessories are not included.

A finished physical candle holder is not included with the digital-file download.

File & Commercial-Use Terms

Files are for personal use only unless you have an active qualifying Sandstorm 3D Designs commercial membership or separate commercial licence.

Where permitted under the applicable Sandstorm membership, authorised finished physical 3D-printed copies may be sold only to the extent Sandstorm 3D Designs owns or is authorised to license the applicable rights.

Digital files may not be resold, shared, redistributed, transferred, uploaded, supplied to another person, or given away, whether modified or unmodified.

The underlying Sandstorm model remains the intellectual property of Sandstorm 3D Designs.

Anyone selling finished physical candle holders is responsible for:

• Print quality

• Material selection

• Heat resistance

• Candle/container compatibility

• Stability

• Final inspection

• Safe-use instructions

• Fire and heat warnings

• Appropriate customer care information

• Packaging and customer support

• Compliance with applicable consumer-product requirements

• Compliance with applicable intellectual-property requirements

Commercial sellers should not describe the finished holder as fireproof, flame-resistant, heatproof, or universally safe with candles unless appropriate independent testing or certification supports those claims.

Fan-Inspired / Trademark Disclaimer

This Philadelphia-themed design includes artwork and branding that appears associated with the Philadelphia Eagles and the National Football League (NFL).

Sandstorm 3D Designs is not affiliated with, sponsored by, licensed by, authorised by, endorsed by, or officially connected with the Philadelphia Eagles, the NFL, or their respective affiliates.

Any third-party team names, logos, marks, colours, artwork, trade dress, or other protected elements remain the property of their respective owners.

No ownership, sponsorship, endorsement, licence, or official association is claimed.

A disclaimer does not create permission to reproduce or commercially sell protected third-party intellectual property.

A Sandstorm 3D Designs commercial membership can only grant rights to intellectual property that Sandstorm 3D Designs owns or is authorised to license.

It cannot grant commercial rights to Philadelphia Eagles, NFL, or other third-party intellectual property.

Members choosing to manufacture, advertise, or sell finished versions containing third-party protected material are responsible for determining whether they have the legal rights required to do so.

Product Responsibility

By printing, assembling, selling, or using this design, the user or seller accepts responsibility for material selection, printer settings, print quality, heat resistance, dimensional accuracy, candle compatibility, final inspection, placement, maintenance, intellectual-property compliance, and safe use.

Sandstorm 3D Designs is not responsible for misuse, improper material selection, heat damage, warped or melted prints, candle-related incidents, fire, personal injury, property damage, third-party intellectual-property claims, or other losses arising from the manufacture, sale, handling, or use of the finished product.