Christmas Bulb Candle Holder β A Warm Little Glow for the Holidays ππ―οΈ (Patreon)
Downloads
Content
Bring a little extra warmth to your Christmas dΓ©cor with the Christmas Bulb Candle Holder from Sandstorm 3D Designs.
Inspired by the shape and colours of a classic Christmas tree ornament, this festive 3D-printable design combines a bright seasonal base with playful holiday artwork and a raised candle platform to create a fun display piece for the Christmas season.
Whether itβs placed on a mantel, side table, shelf, desk, or holiday display, the Christmas Bulb Candle Holder adds a cheerful seasonal accent with plenty of Sandstorm personality.
Features
3D-printable Christmas Bulb Candle Holder
Christmas ornament-inspired design
Decorative multicolor holiday artwork
Raised candle platform
Festive red, white, black, and gold styling
Great for seasonal home or office dΓ©cor
Designed for use with an appropriately sized, enclosed candle container
Designed by Sandstorm 3D Designs in Canada
Commercial-use tiers available subject to applicable membership and third-party IP terms
Now available on Patreon!
Important Printing Information
This is a digital 3D-printable candle-holder design.
Final print quality, dimensional accuracy, stability, surface finish, artwork appearance, and candle fit may vary depending on printer, nozzle, filament, calibration, layer height, wall settings, infill, top and bottom layers, bed adhesion, orientation, colour-change setup, and slicer profile.
Always inspect the sliced preview carefully before printing.
Pay particular attention to:
Base flatness
Candle-supporting surface
Structural walls
Layer adhesion
Raised decorative artwork
Colour-change placement
Candle clearance
Overall balance and stability
Normal FDM characteristics such as visible layer lines, seams, slight dimensional variation, and minor colour or surface differences should be expected.
Sandstorm 3D Designs is not responsible for failed prints, wasted filament, warping, adhesion failures, colour-change problems, incorrect slicer settings, printer malfunctions, dimensional variation, poor candle fit, instability, or other printing-related losses.
Files are supplied as-is, and the user is responsible for selecting appropriate materials, printer settings, candle type, placement, and final use.
Candle Compatibility & Fit
Only use a candle or candle container that:
Sits completely flat and securely on the intended platform
Does not overhang dangerously
Does not wobble or tip
Maintains appropriate clearance from all printed components
Does not expose the printed plastic directly to flame
Candle jars and containers vary considerably in size and shape.
Universal compatibility with every candle or candle container cannot be guaranteed.
Before lighting any candle, confirm that the finished print is stable and that the candle remains securely positioned.
Never force an oversized candle into or onto the holder.
Critical Heat & Fire Safety
3D-printed thermoplastics are not fireproof.
PLA, PETG, ABS, ASA, and other common printing materials can soften, deform, melt, burn, or ignite when exposed to sufficient heat.
An exposed flame must never directly contact the printed holder.
If using an actual burning candle:
Use an appropriately enclosed candle container.
Maintain ample distance between the flame and all printed surfaces.
Keep the flame well below and away from the printed structure.
Never allow wax, a wick, or open flame to contact the plastic.
Make sure rising heat is not concentrated against any printed component.
Stop use immediately if the holder becomes unusually warm.
Do not use if you notice softening, warping, discolouration, cracking, or deformation.
Sandstorm 3D Designs does not certify this product as fireproof, flame-resistant, heatproof, or safe with every candle, filament, container, or environment.
The person printing and using the holder is responsible for evaluating whether the selected material and candle arrangement are suitable.
Never Leave a Burning Candle Unattended
If using a real flame:
Never leave the candle unattended β even for a short period.
Always:
Keep the candle within sight.
Extinguish it before leaving the room.
Keep it away from children and pets.
Keep it away from curtains, paper, wrapping material, greenery, fabric, and other combustibles.
Keep it away from drafts.
Place the entire holder on a stable, heat-resistant surface.
Follow the candle manufacturer's burning and safety instructions.
During the Christmas season, take particular care around artificial greenery, garlands, wrapping paper, ribbons, ornaments, and other combustible decorations.
LED Candle Alternative
For users who want the decorative look without an exposed flame, an appropriately sized battery-operated or rechargeable LED candle may be a safer alternative, provided it fits securely and does not generate excessive heat.
Even with an LED candle:
Check the manufacturer's instructions.
Do not use damaged batteries or electrical components.
Do not use a device that becomes excessively hot.
Make sure the candle remains stable in the holder.
The LED candle itself is not included unless specifically stated.
Stability & Placement
Always place the finished candle holder on a flat, stable, level surface.
Do not place it:
Near the edge of a table or shelf
On an unstable surface
Near children or pets who may knock it over
Near curtains or hanging decorations
Directly beneath shelving or cabinets
Near flammable materials
In an area exposed to strong drafts
Where it could be bumped during normal activity
The finished holder should be inspected for rocking or instability before any candle is lit.
Filament & Heat Considerations
Material selection is especially important for candle-related products.
PLA may be suitable for decorative use but has relatively limited heat resistance compared with some other common printing materials.
PETG and other higher-temperature materials may provide improved heat resistance, but no common FDM filament should automatically be considered safe around open flame or high heat.
The use of a more heat-resistant filament does not eliminate the need for proper candle clearance, supervision, and fire precautions.
Cleaning & Care
For normal care:
Remove the candle before cleaning.
Allow all candle components to cool completely.
Wipe gently with a soft dry or slightly damp cloth.
Use mild soap only when necessary.
Avoid harsh solvents unless known to be compatible with the selected filament.
Dry thoroughly before use.
Do not place in a dishwasher.
Do not expose the print to boiling water or high-temperature cleaning.
If candle wax contacts the holder, allow it to cool completely before attempting removal.
Avoid aggressive scraping that could damage the printed surface.
Child & Pet Safety
Candles, flames, hot wax, matches, lighters, and small decorative components can all present hazards.
Keep the finished candle holder and any burning candle out of reach of children and pets.
This product is not a toy.
Broken printed pieces may also present a choking hazard.
If the print becomes cracked, warped, broken, loose, or otherwise damaged, discontinue use immediately.
Safety & Intended Use
The Christmas Bulb Candle Holder is intended as a decorative seasonal candle display when used responsibly with a compatible enclosed candle or suitable LED alternative.
It is not intended as:
A toy
A fireproof enclosure
A heat shield
A candle jar
A replacement for the candle manufacturer's safety container
A food-contact product
Safety equipment
A load-bearing product
Inspect the finished print before every candle use.
Discontinue use immediately if you notice:
Warping
Heat damage
Discolouration
Cracking
Layer separation
Instability
Loose components
Damage to the candle-supporting surface
Included / Not Included
The Patreon download includes the applicable digital Christmas Bulb Candle Holder file(s) described in the release.
Unless specifically stated otherwise:
Candles, candle jars, LED candles, batteries, holiday decorations, greenery, gifts, display props, and other accessories are not included.
A finished physical candle holder is not included with the digital-file download.
File & Commercial-Use Terms
Files are for personal use only unless you have an active qualifying Sandstorm 3D Designs commercial membership or separate commercial licence.
Where permitted under the applicable Sandstorm membership, authorised finished physical 3D-printed copies may be sold.
Digital files may not be resold, shared, redistributed, transferred, uploaded, supplied to another person, or given away, whether modified or unmodified.
The underlying model and original Sandstorm artwork remain the intellectual property of Sandstorm 3D Designs.
Anyone selling finished Christmas Bulb Candle Holders is responsible for:
Print quality
Material selection
Structural integrity
Candle fit and stability
Final inspection
Heat and fire warnings
Accurate product descriptions
Safe-use instructions
Packaging and customer support
Compliance with applicable consumer-product requirements
Commercial sellers should not describe the finished product as fireproof, flame-resistant, heatproof, universally candle-safe, or certified for candle use unless they have appropriate independent testing or certification to support those claims.
Commercial Seller Candle Safety Responsibility
Anyone selling a finished physical version should clearly provide customers with candle-use warnings.
At minimum, sellers should communicate that:
A burning candle must never be left unattended. Printed plastic must not contact open flame. Adequate heat clearance must be maintained at all times. Keep away from children, pets, drafts, and combustible materials. Discontinue use immediately if the holder shows any signs of heat damage, warping, cracking, or instability.
The seller is responsible for the material they choose and for determining whether their finished print is appropriate for the way they advertise it.
Product Responsibility
By printing, assembling, selling, displaying, or using this design, the user or seller accepts responsibility for material selection, printer settings, print quality, structural integrity, candle compatibility, clearance, stability, placement, supervision, fire safety, final inspection, customer warnings, and safe use.
Sandstorm 3D Designs is not responsible for failed prints, melted or warped parts, candle fires, burns, wax damage, property damage, personal injury, pet injury, damaged belongings, misuse, unattended candles, inadequate clearances, or other losses arising from the manufacture, sale, handling, or use of the finished product.