Part 1 of the beginners course 'Character design for easy rigging in Live2D, up to rough sketches'. (Patreon)
Content
Hello everyone. This is Kanbutsu Himono.
This is part 1 of the course for beginners that I talked about in my last article.
‘Character Design for rigging easily in Live2D, up to rough sketches’.
Live2D is a tool that, with enough skill and time, can theoretically be used to create anything.
While I don't usually reject any design from illustrators to preserve their unique styles, many Live2D professionals also find creative ways to make even complex designs rig in Live2D.
However, even so,it’s still a fact that some designs are easier or harder to rig in Live2D.
Beginners may stumble if they suddenly start with a design with a high degree of difficulty.
Therefore, I would like to remove such stumbling blocks by explaining what kind of designs are easy to rig in Live2D in this article.
Even if you are not a beginner,this article may also be useful for Vtubers who are looking to keep costs down when commissioning a model and illustrators who want to know how to design characters that are less of a burden for riggers.
There are three main benefits of considering an easy-to-move(rig) design.
The first benefit is, of course, that it should be easy to move cleanly.
Even if there is nothing fancy in the design, a model that moves smoothly without any breakdowns is stress-free for the viewer, and for the creator(rigger), it gives confidence that the model has been rigged well. This is a very important motivation, especially for those just starting out in Live2D production.
The second benefit is that (especially when you start earning money as a professional) you’ll develop a judgement criterion for whether a character design will be easy to model, which will help you better estimate production time and cost.
The third benefit is that it makes it easier to add elements later on. For instance, if you decide or have more requests to add glasses or cat ears later, a cleanly made base model will make it easier to add these variations. The movements of the base model will serve as the foundation for the added elements' movements.
If a different variation part is added on a difficult part to rig, it becomes even more challenging.right?
So what is ‘character design that is easy to move in Live2D’?
The following points can be roughly summarised in bullet points.
As I said at the beginning, this is just a design that is easy to move, but it does not mean that it must be this way.
・A symmetrical pose
・No complex decorations
・Simple shoulder design
・Simple pose (with hands not touching the body)
・Clear distinction between the front and back of the hair (hair with a simple flow)
・Not too many swinging objects.
・Hair that is neither too long nor too short
・Light source is in front of the face.
It's so rough that I'm sure your head is full of ‘?’ marks, so I will explain them one by one.
Now, let's have a look at the new ‘Neko Maguro Nyan-chan’ I drew for the course.
Isn't she cute?
Using her design, I’ll go into more detail.
First, “A symmetrical pose”
If you draw a line from the centre across the entire character, the left and right sides are symmetrical.
This is because when rigging in Live2D, after creating a movement for one side of the character, the same movement is often copied to the opposite side using a function called invert copy.
For example, when rigging a blink movement, the up-and-down movement of the eyes is the same on both sides.
In Live2D, after rigging a blink for one eye, the same movement is often copied to the other side by invert copy.
If you rig asymmetry eyes on both sides, you need to create the movement for both, so which simply adds more steps.
Second,”No complex decorations”
complex decorations are mainly the following.
(i) Hard decorations such as crowns, swords, etc.
(ii) Decorations covering the head, such as hats, veils and hoods.
(iii) Decorations such as glasses and frills that, when moved, overlap with other parts or require new parts to be added.
These are decorations that tend to look uncomfortable if they are not carefully thought out and carefully made when moved.
Therefore, the level of difficulty is slightly higher.
“Simple shoulder design”
This can be explained using an example of a kimono (or martial arts uniform).
Can you see that the shoulder seams slightly sit lower?
In Live2D, the torso and the shoulder to arm parts are typically separated into different parts, each with its different movement. If the shoulder design is complex, it becomes harder to distinguish the boundary between the torso and the shoulder/arm area, increasing the difficulty of the movement rigging.
Next,Simple pose (with hands not touching the body)
What does it mean to be simple?
As I have bracketed it, for example, the hands are not touching the body.
In the case of a pose with hands on the hips, if the torso moves up, down, left or right, you’d need to rig the arm(below the shoulder) to wrap around the torso while keeping the hand fixed on the hip.
The red in the image is the part that moves and the blue is the part that is fixed and does not move.
It may be difficult to visualise, but a mixture of well-moving and fixed parts that do not move means that the level of difficulty is increased.
Clear distinction between the front and back of the hair (hair with a simple flow)
For example, if the model's side hair is tucked behind the ears and the ends of the hair come to the front, such as the shoulders and chest,
The part of the side hair that hangs over the ear (the blue part) is behind the face, while the tip that comes to the shoulder or chest (the red part) is in front of the face and body.
Simple side hair can be created with just one part on each side, but in this case, using a single part could look strange. It is necessary to prepare a masking part to cover up the excess or divide the hair parts into more parts to distinguish the front and back of the side hair.
▲ If the hair is divided into two parts: the back side part that is over the ear (blue) and the tip part that comes in front of the face (red).
▲ If the ears are to be used as mask parts (red) and the side hair (blue) is to be covered up so that it does not come before the ears.
Not too many swinging objects.
Swaying objects include long earrings, ribbons, strings and skirts.
Each swaying object has a different swaying width and timing, as each material has its own swaying method.
‘When four swaying objects move my model's body to a certain angle, the tips of the swaying objects come to the same position at the same time, and they overlap in a way that I don't expect,and cause bugs. Not only that, but strings or ribbons might clip into the body…!”
In this way, bugs that were not expected are more likely to occur.
It takes endless effort if they adjust them one by one, so we want to avoid interference between objects that overlap each other as much as possible.
So it is important not to have too many swinging objects, in order to reduce the number of bugs.
Hair that is neither too long nor too short
Clear distinction between the front and back of the hair (hair with a simple flow), as noted above, but the length of the hair is also important.
As with swaying objects, if the model's hair is too long, it is much more likely to interfere with other parts of the model when it is moved up and down, left and right.
If it's too short, that makes it difficult to rig the parts of the model's head that weren't visible when facing the front come around when you want to move the model's face cleanly.
Light source is in front of the face.
This is about colouring.
The light source is the way the light hits the character, and if the light source is drawn on the assumption that it is in front of the character, the shadows will be symmetrical.
Since they are symmetrical, they are still easy to move(rig).
Incidentally, in the case of a single illustration, the light source is often shifted to the top left or top right to give the shadows more body.
Now, here’s a tip for drawing an appealing illustration, even in a simple, static pose.
Earlier, I mentioned that the tips for a model that is easy to move are symmetry and has a easy pose. This means equal standing on a stick.
If you have studied illustration, you have probably heard of the term ‘contrapposto’ as a way to draw standing figures in an attractive way.
Contrapposto is a pose in which the figure stands with its weight on either leg, and is often used as a pose in illustrations because the centre of gravity is shifted and the shoulders and waist line are tilted, resulting in a natural and beautiful pose.
However, the poses that are easy to rig in Live2D are standing poses without such a centre of gravity or body tilt, and the face is facing straight ahead, so it is actually a little difficult to ‘draw attractively’.
Even those who usually draw illustrations may be confused at first because of the difference in technique. (I was confused...!).
You may be wondering what to do then, but don't worry.
There are two main points to making a character look cute while facing forward and standing on a stick.
One, the character's eyes should be in focus on this side of the screen.
After all, it's exciting when a cute girl looks right at you, isn't it? So, try slightly crossing the pupils and irises inward.
So, try slightly crossing the pupils and irises inward.
Second, pay attention to the direction of your model's hands.
This is also for people who don't draw a lot, but if you stand up, relax and let your hands go down naturally, your thumb and index finger will be in front of you.
From there, the middle finger is slightly visible, while the ring and little fingers go around to the back and are not very visible.
This kind of hand makes it easier for the pose to look natural and relaxed.
Conversely, daring the character to take other poses can show their personality.
Hand movements are easy to add expressions and show personality, so it is good to experiment with various types of hand movements.
One more tip, if you are making(rigging) a female character, it might help to be conscious of making the model's lower body slightly inward-pointing toes, so that she looks prettier.
While I’ve mentioned female characters, it depends on the personality and character traits. For a male character or a lively personality, try turning the toes outward. (Drawing shoes in a straight-on view can be tricky, so this also helps avoid that challenge.)
The common theme here is to emphasise the emotions you want the viewer to feel, like "cool" or "cute," by amplifying the character’s individuality.
Even stick pose can be expressed charactar's individuality by adjusting the smallest details, so you try it out!
Finally, as a postscript, I would like to write about the concept behind the design of Nekomaguro Nyan-chan that I created.
I think it's hard to come up with the right idea at first when you're trying to create a character you love, so I hope it can be a reference for your thinking.
・I chose the 'Kemomimi' (animal ears) attribute because it looks cute, both in terms of the silhouette of the character as a whole and in terms of rigging in Live2D. But I also want human ears, so the Kemomimi are fake ears.
・I always make my character's hair bob, so I decided to make it a little longer this time.
・I also love the German traditional costume, Deirdre, so I styled her outfit to resemble that.
That sort of thing.
・Nyan-chan's colours are green, brown and pink, which are colours I don't usually use.
・I like to be cute and mocking, so Nyan-chan has a slightly cat-like mouth with 'Maro mayu' eyebrows.
'Maro mayu' eyebrows.
Nyan mouth
That's all for Beginners'‘Character Design for rigging easily in Live2D, up to rough sketches’.
Thank you for reading this long article.
The purpose of this article is to help beginners enjoy completing their Live2D models. If this article has made you feel like "Live2D involves so many considerations, it seems difficult," then please take the content as mere reference.
I plan to continue writing more beginner tutorials alongside my usual articles.
I'm also thinking of turning the beginner's course into a video in the future, so please let me know in the comments if you have any questions or if there's anything in this article you don't understand!
(So the text of the article probably looks like a script for a video too).
See you next time. Bye bye.