【High-Quality Live2D Guide for Beginners】 Loading PSD file ~ Clipping (Patreon)
Content
Hello everyone! This is Kanbutsu Himono. Starting with this article, we’ll be diving into actual Live2D work and explanations! Here’s the
Hello everyone! This is Kanbutsu Himono.
Starting with this article, we’ll be diving into actual Live2D work and explanations!
Here’s the previous article: ↓https://www.patreon.com/posts/for-beginners-i-116235465?utm_medium=clipboard_copy&utm_source=copyLink&utm_campaign=postshare_creator&utm_content=join_linkAt first, I'll explain the definition "Beginner" for this tutorial.
Nowadays, there are a lot of Live2D tutorials available. If you search for "Beginner + Live2D" on YouTube, you’ll find plenty of high-quality tutorials.In such an environment, I assume that those who go out of their way to pay for my Patreon and take this beginner’s course are beginners who want to create a fairly elaborate model right from the start!
So, in this guide, I will focus on a simple yet commercially viable modeling approach.
I aim to explain each operation in great detail, ensuring that even complete beginners can follow along by simply following the instructions!
I also plan to thoroughly explain advanced topics, such as physics corrections, which are often considered expert-level.However, this means that there will be a lot of information, so I will divide it into:Essential steps → Necessary for creating a working modelOptional steps → Can be skipped if too difficult
Example:
Blinking → Essential
Eye Physics → Optional
Optional steps will enhance the model’s appeal, but if they feel overwhelming, you can skip them!I will try to explain even basic operations that experienced users take for granted.However, some details might be missing, so if you have any questions, please feel free to leave a comment!And,It's important notes before we begin.This guide is based on the Live2D PRO version (paid version).
Additionally, I will be using the latest version of Live2D Cubism Editor available at the time of production.
If there’s enough demand, I might create a tutorial for the FREE version, but since the FREE version has many feature limitations, I’ve chosen to use the PRO version for this detailed guide.
That’s it for the introduction—let’s get started with the explanations!
------------------------------------------------------------------------------------------------------
Table of Contents
[Essential]Downloading Software & Importing the Model
[Optional] Fixing Misaligned Clipping
Bonus Section① - How to Switch to Dark Mode
Bonus Section② - Another Way to Apply Clipping
Tip: Press Ctrl+F (or Command+F) and type the section titles above to quickly jump to them!
---------------------------------------------------------------------------------------------------------
[Essential]Downloading Software & Importing the Model
Since this is a beginner’s guide, I will explain everything in detail!
If you are already familiar with this part, feel free to skip ahead!
To create a Live2D model, you will need the following:
Live2D Cubism Editor
A PSD file
Live2D Cubism Editor is the official software used for Live2D modeling.
As of February 2025, the latest version is 5.2.
If you have not downloaded it yet, please do so from the official website: ↓https://www.live2d.com/en/cubism/download/editor/
Select your OS (Windows or macOS).Agree to the Software License Agreement & Privacy Policy.Choose the appropriate option:
First-time download → Check this if you are downloading for the first time.
Download update → Check this if you are updating your existing version.
If this is your first time, enter your email address.Once completed, the "Download latest release version" button will turn from gray to orange, allowing you to click and download the installer.
After downloading, you will get an orange icon installer like this:
Click the installer to begin the installation.
Language options include:
Japanese
English
Chinese
Korean
Choose your preferred language and click OK.
Then, simply click Next → Agree
→ Install in order.
Once the installation is complete, click Finish to close the setup.
If everything was installed successfully, you should now see two applications.
For this tutorial, we’ll be using"Live2D Cubism Editor ○○ (version name)", so click that one! Live2D Cubism Editor will open!
I use dark mode, so my screen is black, but the default is light mode (white background).(How to switch to dark mode is explained in the Bonus Section at the end.)
Since this guide is for the PRO version, select anything except "Start as FREE version"However, here is an important note.
If you are using it for the first time, you can try the PRO version for free, but the trial period is 42 days.
If you are reading this article in real time, the guide will likely not be completed before your trial expires (´;ω;`).
As a workaround, you can either switch to the FREE version midway, subscribe to the PRO version, or wait until the entire guide is complited before starting your trial. Personally, I believe this software is worth paying for, so if you don’t want to wait, you can start your trial and refer to other tutorials as well!
If you decide to purchase it, you will receive a license key via email, so enter it and click "Activate License." When this home screen appears, just click the X button in the top-right to close it.
Now, Live2D Cubism Editor is ready to use!
The next thing you need is a PSD file.
A PSD file is the layered illustration data that is essential for creating a Live2D model.
Each part of the illustration is separated into layers, like
"Ribbon on animal ears"
"Fluffy part of animal ears"
Preparing a properly separated PSD file can be quite a challenge.
However, since you’re following this guide, you can download my pre-prepared PSD file of Nyanchan! 🎉
Get it from this article:https://www.patreon.com/posts/psd-file-release-114937444?utm_medium=clipboard_copy&utm_source=copyLink&utm_campaign=postshare_creator&utm_content=join_link
Download: 【Nekomaguro Nyanchan】Coloring.zip
(Please check the terms of use before downloading!)After extracting "【Nekomaguro Nyanchan】Coloring.zip", you’ll see two PSD files.
For Live2D modeling, we’ll usef- "Nekomaguro_import.psd"
The other file, "【Nekomaguro Nyanchan】Coloring.psd", is for adjusting or adding parts later.
I’ll explain how to use it in a future tutorial, so for now, just ignore it! Drag and drop "Nekomaguro_import.psd" into the Live2D Cubism Editor window you just opened!
You will see a pop-up like this.
This appears because Nyanchan’s PSD file has a very high resolution(file size).
Since the full scale can be heavy, this function allows you to lower the preview resolution.
The difference between 1/8 preview (left) and full scale (right) is quite noticeable!Ideally, you should use full scale, but if the "<Recommended>" mark is on 1/4 or 1/8,then full scale might be too much for your system. In that case, it’s best to limit it to 1/2 or lower!
Select the preview size that suits your setup and click OK.Nyanchan’s illustration should now appear on the right side of the screen! The area where the illustration is displayed is called the Modeling View.
You can zoom in and out by scrolling the mouse wheel over the Modeling View.However, when you zoom in, you will notice that some parts look messed up!
The face and eye shadows are sticking out.
Something red things around the skirt.These issues can be fixed later, and fixing them too early may cause extra work (I'll explain why in a later article).so I usually create my work without worrying about it.But since they look quite bad visually, let’s take this opportunity to learn about the Clipping function and fix them right away!ーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーー
[Optional] Fixing Misaligned Clipping
Skip this section if you don't mind the visual issues or you want to avoid unnecessary steps.
However, if you're completely new to Live2D and don’t know what Clipping is, I recommend reading this section!Why Does the Display Look Broken?
When importing a PSD into Live2D Cubism Editor, some Clipping settings are taken off.
For those familiar with digital painting software, this functual should be easy to understand.
In Live2D, "Clipping" means restricting part B’s visibility to fit within part A's boundaries. ↑ For example, when clipping B to A, the display will look like this!Nyanchan’s illustration uses a lot of Clipping. Just looking at the face, it appears fine when clipping is correctly applied... But when clipping is removed, the shadows stick out everywhere like this!It seems that Live2D removes clipping settings upon import, possibly as a specification.It’s a bit of work, but let’s go ahead and fix it! By default, you should see the "Parts Palette" in the upper left corner. Inside these pc folder-like icons (the blue-marked areas, which I will refer to as "folders" for convenience), there are more folders and individual parts (which technically have a different official term in Live2D, but I will call them "parts" for simplicity).
Clicking the "V" next to a folder (marked in blue) will expand it, allowing you to see its contents. The eye icons (marked in red) let you toggle visibility on and off.
First, open the folders in this order:
"Full Body" → "Head" → "Expression" → "Eyes"
Then, turn off the visibility of the following folders:
"Kemomimi", "Side Hair", "Front Hair"
This will make it easier to see the areas where shadows are sticking out.
Next, open the "Eye →" folder.You should see various parts listed inside.In the example from the previous diagram, the "White Eye →" part is A, and the four parts outlined in red are B. Ideally, the B parts should only be visible within the area of A, but since clipping is not applied, they are displayed in full and extend beyond the intended area.
If you look closely, you can see that they extend beyond the boundaries.
To fix this, click to select the "White Eye→" part, then check the "Inspector" at the top center of the screen.
The Inspector allows you to view and edit information about the currently selected object (such as parts and folders).
The most important elements are "ID" (second from the top) "Clipping ID" section (fifth from the top)
Let’s copy the ID of the "White Eye →" part.Click on its ID ("ArtMesh41") and press Ctrl+C on your keyboard to copy it.↑ In this state,press ctrl + c(※Mac users: Since I’m using Windows, all key commands are Windows-based. If you're using a Mac, you might need to search for equivalent shortcuts like "Mac alternative to Ctrl".)Once you have copied the "White Eye →" ID, paste it into the Clipping ID section for the eye part by pressing Ctrl+V.
You can do this one by one, but since we have multiple parts to adjust, let's do it all at once!Click to select the "Eye White Shadow →" part first, then hold Shift and click "Eye →".This will allow you to select multiple parts at once.While multiple parts are selected, paste the White Eye ID into the Clipping ID section of the Inspector, then press Enter.Now, all the eye parts have been clipped to the white eye at once!At this point, because multiple parts are still selected, the Modeling View might look cluttered with points everywhere.Click on an empty space in the Modeling View (like the blue-marked area) to deselect everything. Comparing both eyes, you can now see that the shadows no longer extend beyond the boundaries!(uh...can see? look at the inner part of the eyes. )
~a little tip~
You can also select multiple parts using Ctrl instead of Shift.
Shift allows you to select multiple parts in a sequence.Ctrl allows you to select multiple parts one by one.For example, if you first select "Eye White Shadow →", then hold Ctrl while clicking "Eye →", only those two parts will be selected.
Using Shift is convenient when selecting consecutive parts, while Ctrl is useful for selecting scattered parts.~a little tip Fin~
Now that you understand the basics of clipping, let’s apply it to other areas.
Here’s a list of additional parts that require clipping. Follow the same steps as before!Clip B parts inside the "Eyes ←" folder to the"White Eye ←" part.Clip B parts inside the "Outline" folder to the "Outline" part.Clip B parts inside the" Side Back Hair" > "Back Head" folder to the "Back Head" part.
Clip the "Neck Shadow" inside the Body > Upper Body > Collar・Neck > "Neck" folder to the "Neck" part. Clip the "Corset Lines" inside the Body > Upper Body > "Corset" folder to the "Corset" part. Clip the "Ribbon Shadow" inside the Body > Upper Body > "Collar・ Neck" folder to the "Neck Ribbon" part. Clip B parts inside the Body > Lower Body > "Skirt Green" folder to the "Skirt Edge" part.
Clip each B part inside the "White Skirt" folder to its corresponding A part (e.g., "White Skirt 1" should be clipped to "Green Skirt Shadow"). If you’ve done this correctly, the overall display should now look like this! Umm..., some areas are still misaligned.The remaining issues require a slightly different approach to clipping.First, let’s fix the shadows on the chest and décolletage area (other parts are hidden for clarity). The problem here is that these shadows need to be clipped to both the chest and décolletage.
In Live2D, you can clip a part to multiple base parts at once!As before, you could copy the ID of the "Chest" part, paste it, then copy the ID of the "Décolletage" part and paste it… and repeat this process. But, if the number of base parts for clipping increases to three or four, this can become quite tedious, right?
So here, try selecting both the "Chest" part and the "Décolletage" part at the same time, then press Ctrl+C, and paste it (Ctrl+V) into the Clipping ID section of the B parts outlined in red.↑ Ctrl+c in the state.
↑After that, paste the IDs into the B's Clipping ID section by Ctrl+V, you can apply clipping to multiple base parts in one step!There are several ways to apply clipping, and when you need to clip to multiple parts like the Chest and Décolletage, copying directly with Ctrl+C is a convenient method.
(There is actually another way to do this, but I will include it as a bonus at the end of the article!)Now, let's continue clipping the remaining parts in the same way!Clip the "Skirt Drop Shadow" to the A parts inside the "Leg" folder.
Clip the B parts inside the "Arm" folder to their corresponding A parts. *If ‘Forearm Drop Shadow’ is not found at the image location in your file and ‘Front Hair Drop Shadow’ is found instead,‘Front Hair Drop Shadow’ is the Forearm Drop Shadow.I made a mistake when I translated the file. Sorry.Now, only one major issue remains—those bright red mask parts around the skirt.
Try hiding the "Skirt Mask" part to see what’s happening.You will notice that the skirt coloring extends beyond the intended area.The "Skirt Mask" part is there to hide this excess area.Now, take a look at the Inspector. Below the Clipping ID section, you’ll see an option called "Invert Mask".
If you enter the Skirt Mask’s ID into the Clipping ID section and check the "Invert Mask" box,
instead of displaying the B part within the base A part's area (like normal clipping), it will do the opposite—hiding the B part within the base A part's area!
What's even more amazing is that this Mask function remains effective regardless of the opacity of the part.Let’s try it!First, select the "Skirt Mask" part, then set its Opacity in the Inspector to 0%.Now the Skirt Mask has become completely transparent, making it visually identical to being hidden.Even though we can't see it, the Mask function is still working behind the scenes.Next, in the Clipping section of the "Skirt Edge" part, enter the ID of the "Skirt Mask" part and check the "Invert Mask" box.
And just like that...
The excess parts of the skirt have disappeared beautifully!Even if the Mask part opacity is set to 0% and the part visually is transparent, the area of the mask function is still remains active. This allows you to create dedicated masking parts to hide any excess areas like this!The reason we go through this somewhat elaborate process is because, when we later rigg the movement of the skirt, this mask method will allow for a smooth and natural rotation.
https://x.com/himono_vtuber/status/1456911658656223238
For example, ↑here’s an VTuber model I created four years ago.I used this exact mask technique to make the skirt move naturally.
This is an advanced technique that can be used even in professional Live2D model rigging.If you master it, you'll be able to create much more polished models!🥰That's it for today's lesson!
Next time, we’ll be working on eye blinking animations!(I originally planned to include it in this article, but it became too long, so I decided to split it into the next lesson.><)
If you have any questions or need clarification, feel free to leave a comment! ーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーー
Bonus Section① - How to Switch to Dark Mode
If you'd like to change the Live2D Cubism Editor to Dark Mode like in my screenshots, follow these steps:
Go to "File" → "Envirronment Setting" → "General" → "Color Theme", then select "Dark".
(This change will take effect after restarting the application!)
Since I spend long hours working, my eyes get tired easily with bright screens,
so I personally prefer using Dark Mode.💦
The Envirronment Setting menu also lets you adjust language settings, object colors, and other customizations.Once you get used to Live2D, I recommend adjusting it to fit your workflow!
Bonus Section② - Another Way to Apply Clipping
You may have noticed a small icon next to the Clipping section in the Inspector Palette.Clicking here will bring up a display similar to the Parts Palette below the Clipping section.
Here, you can check which parts are currently being clipped, and by toggling the checkboxes, you can directly change the parts being clipped!
Since it's more intuitive than checking by ID names, I also use it from time to time!
Going forward, I plan to use these bonus sections to share
Some alternative methods within Live2D that were not covered in the main lesson
Small but useful Live2D tips.
I hope you find them helpful! 😊
See you in the next lesson! ✨