【High-Quality Live2D Guide for Beginners】 Eyelash Deformation Part3 (Patreon)
Content
Hello everyone! Kanbutsu Himono here. In today’s Live2D tutorial, we’re going to continue working on eyelash deformation! I hope we can fini
Hello everyone! Kanbutsu Himono here.In today’s Live2D tutorial, we’re going to continue working on eyelash deformation!
I hope we can finish the eyelash portion this time... but let’s see how it goes!
Here’s the link to the previous article ⬇️
------------------------------------------------------------------------------------------------------
Table of Contents
【Essential?】 What to Do When You Forgot to Key a Parameter Before Deforming It
[Essential] Mesh Division and Deformation for the Outer Corner of the Eye
【Essential】Mesh Division and Deformation for the Double Eyelid
【Essential】 Mesh Division and Deformation for the Sclera (White of the Eye)
【Optional Deformation】Mesh and Deformation for the Eye Bag
【Optional Depending on Model】Mesh and Deformation for Sclera Shadow
Tip: Press Ctrl+F (or Command+F) and type the section titles above to quickly jump to them!
------------------------------------------------------------------------------------------------------
ーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーー
【Essential?】 What to Do When You Forgot to Key a Parameter Before Deforming It
Before continuing with the eyelash tutorial, I want to cover this little trick.Honestly, it’s more of a bonus tip, but knowing this makes you approximately a million times more efficient, so I’m including it here!
If you’ve used Live2D for a while, you’ve probably made this mistake at least once:You start deforming a part before adding a key to the parameter—and then spiral into despair. 😇
Okay, blinking motion is done~ 😆 Let’s check it out! Wait... huh??
NO KEYFRAMES?!!! 😱😱😱😱😱Yep... that one.
Normally, you’d have to redo everything—or worst case, you’re just stuck. But don’t worry! There are a few ways to recover from this!
① Use “Edit Form → Revert to Original”
This method only works under specific conditions, but it’s super simple!You can use it if the part isn’t linked to any other parameters besides the one you forgot to key.
For example:
Here, the "〇EyeL Open" parameter was forgotten.But there are no other linked parameters, so we’re good!
Clicking the red circled area shows you all linked parameters—a super handy feature.
Now, here’s how to recover:
First, add keyframes to the 〇EyeL Open parameter that you forgot.
Then, return the parameter to its default position.
You can do this quickly by pressing Ctrl+1 (just like we learned last time!).
Once that’s done, go to the top menu and select:Modeling → Edit Form → Revert to Original
✨And just like magic—the lashes return to their default shape!! 💖💖
For 2-point parameters like eye blinking, this one extra step can save you a lot of rework. Definitely try it out if you get stuck!
② Use Automatic Backup Files or Save-As
Here’s a trickier case:
You created a blink with the 〇EyeL Open parameter, and then made a smiling closed-eye version using 〇EyeSmile, but forgot to add keyframes to it.In this situation, the original closed-eye shape gets overwritten by the smiling one and disappears into the void... 😇
But don’t panic! This is where you want to remember the auto backup folder!
If you dig through this folder, there’s a chance your old data—before the overwrite—still exists.
Alternatively, you can use Save As to preserve your current overwritten data under a new name, and then open the previous version to dig out the old shape.
↑ In this example, I saved the overwritten version as "Nekomaguro_01_EyeOpen1.cmo3",then opened the original file "Nekomaguro_01_EyeOpen.cmo3",and sure enough—the original closed-eye shape was still there!
If you’re able to successfully recover the shape from before it was overwritten, the next step is to merge it into your latest file.
Do you remember the features from the last article:Copy Form (Ctrl+Shift+C) and Paste Form (Ctrl+Shift+V)?(If you’ve forgotten, feel free to recheck the previous tutorial!)
Here’s the amazing part—as long as the art mesh shape is the same, you can even use these features across different project files!
Just like in the video above, you can copy the original closed-eye shape from 'Nekomaguro_01_EyeOpen1.cmo3' and paste it directly into 'Nekomaguro_01_EyeOpen.cmo3'.
How cool is that!?
This can save you from having to rerig the entire closed-eye shape from scratch—so if it fits your situation, definitely use this trick to save time! ✨
(From now on, I’d like to respond to reader comments and questions like this, so feel free to send them in! 🥰)
[Essential] Mesh Division and Deformation for the Outer Corner of the Eye
As I mentioned at the end of the previous article, we’re now getting into what I personally consider the toughest part of blinking deformation:The outer corner of the eye!
For reference, the next hardest part was Eyelash Large, which you’ve already tackled!So that “mid-boss” is down—now let’s aim for the final boss! 🔥(And don’t forget to take breaks if you’re getting tired!)
First, mesh division.
There’s nothing particularly special to mention here—but compared to Eyelash Large, the mesh here is a bit more detailed.Which means… yep, it’s going to move quite a bit! 🔥
Let’s take a look at something you might want to watch out for as a beginner.(This isn’t necessarily wrong, but it does affect quality quite a bit 👀💦So try comparing it with the method I’ll show you afterward!)
Ta-da! Here’s what this common beginner approach tends to look like:At first glance, it looks like it moves just fine, but...
Look closely, and you’ll notice the outer corner slides unnaturally,and ends up cutting into the lower lashes!
Remember in the last article when we talked about how “sliding = visual discomfort”?
This is a perfect example of that phenomenon in action!
Now let’s compare that to how I, Kanbutsu Himono, do it.
See the difference?It’s super clear—the outer corner isn’t sliding at all! ✨
So why does this make such a big difference in movement?
Let’s take a closer look at the beginner-style version.What’s happening is that the outer corner is being rotated and then simply tucked behind Eyelash Large.
https://drive.google.com/file/d/1RKL4yVmoqb8cw-48Q6EHIhZNuK52vox6/view?usp=sharing
This is simple and easy to do, so if you’re just starting out and your goal is “as long as it moves, I’m happy!”,
then honestly, this method is totally fine ✨
But in this article, we’re going to go one step deeper and explore:
“Why does this method cause the outer corner to slide?”
Compare the outer corner’s position with the eye open and closed.(Use the S key for highlight view and snapshot to compare—just like we did last time!)
Sorry the image is a bit hard to see,but in the beginner-style version, you can clearly see the tip of the outer corner (blue line) shifting far inward.It doesn’t match the movement range of the other eyelash parts (red lines), so it ends up drifting out of place.
I’ve dramatically squashed the outer corner vertically so that the movement range doesn’t misalign with the surrounding parts.
And that’s the secret behind the “no sliding” result! ✨That wraps up the theory!Now all we have to do is learn how to seriously squash the outer corner vertically, and you’re good to go!
First, let’s set up the deformation path.
Add the path like the image below.
Make sure to turn on the "Fold line" option for sharp bends.
(If you forgot how to add deformation paths, check the article from two sessions ago👇)
https://www.patreon.com/posts/for-beginners-to-126718621?utm_medium=clipboard_copy&utm_source=copyLink&utm_campaign=postshare_creator&utm_content=join_link(My articles tend to be ridiculously long, so if you're only looking for the deformation path section, try using Ctrl+F to search the page! I wish Patreon and Fanbox had a built-in table of contents...)
Anyway, back on track—After setting the deformation path, select the outer corner of the eye and add keyframes to the 〇EyeL Open parameter.
First, move the inner root of the outer corner part so it aligns with the root of the closed Eyelash Large.
https://drive.google.com/file/d/1I0TylMMBrWpGiIFSt-wO7MbyMFHuPYRP/view?usp=sharing
Next, use overall defomation or the deformation path control points to squash the outer corner vertically—aggressively!
https://drive.google.com/file/d/1TOeSQTtIC1sjjkbC4ttXajja-HFtPlPH/view?usp=sharing
Now tweak the shape while playing with the parameter.If the control points warp the mesh too much during extreme deformation, you can manually adjust the mesh to smooth things out.
https://drive.google.com/file/d/1UBNUItM9OipaRWXPt7QMBKPa5DpzjVom/view?usp=sharing
~Small tip~
In the above video, you might notice around the 13-second mark that the deformation path suddenly disappears.
No, it wasn’t deleted—just temporarily hidden.
Check the top-center of the interface; there’s a menu labeled "Edit Level".
If you switch to a level other than the one where the deformation path was created,the path will be hidden temporarily! ✨(The default level is 2, so switching to 1 or 3 will hide it unless you’ve changed the default settings.)
So, if you ever feel like:
“Ugh! My cursor keeps snapping to the deformation path and I can’t edit the mesh properly!!But I don’t want to delete the path either...”
Then this trick is for you. 😋
~Small tip End~
Let’s go ahead and rig the smiling closed-eye version for the outer corner too!
https://drive.google.com/file/d/1_J4c9txQ8k5_Ytcuje71Sgo8K1o0dJ2T/view?usp=sharing
With the outer corner selected, add keyframes to the 〇EyeSmile parameter.Then, using a mix of showing and hiding the deformation path, gradually adjust the shape so the outer corner tucks behind Eyelash Large.
Because the mesh can easily become distorted during this part, this step may be especially tricky for beginners!But don’t worry—just take it slow and deform it bit by bit.
Once that’s done, the outer corner is complete!It looks super clean, even when the eyes are half-closed! ✨
https://drive.google.com/file/d/1GzhoZVKnQl4QbxIfLJ671g8BIUIq83pS/view?usp=sharing
【Essential】Mesh Division and Deformation for the Double Eyelid
Next up is the eyelid crease, or double eyelid.After defeating the outer corner of the eye, this one should feel like a total pushover!
Here’s the mesh division and deformation path—super straightforward.
For the crease, I used Stroke mesh-mapping tool.I talked about this in a bonus section in a previous article 👇(You can find it by searching “stroke” within the article!)
https://www.patreon.com/posts/126941033To reinforce how to use it practically, here’s a demo:https://drive.google.com/file/d/1gt7mEYnFMhG8TjW9c-q2i-KdeN9Ahxcb/view?usp=sharingUse Ctrl + drag to adjust the size of the yellow ring.Even if there is no ring at first, dragging while holding Ctrl will generate one!(This is a quick refresher from two articles ago!)Now, let’s add keyframes to 〇EyeL Open and deform it just like the other parts.
Start by adjusting the horizontal width so it matches the same amount of movement as the lashes.https://drive.google.com/file/d/1js1DUA5uJmisFzCRszb3ZH2QZyD4JFJE/view?usp=sharing
(I manually adjusted the shape while watching it move, but you could also use snapshots if that’s easier.)
Then, move the control points of the deformation path to curve the crease along the shape of the lashes.https://drive.google.com/file/d/1PSdQTb7iEyuvbwcIK67BPI7oMhoX4oQP/view?usp=sharingHow and how much you deform the crease is totally up to your personal style—it varies a lot between artists.Generally speaking, there are two “factions” (lol):
① Shape the crease to follow the lashes② Shape the crease to follow the eyelid
Personally, I usually go with ①, but both are valid in terms of logic—so either is totally fine!(Which style are you, I wonder? ✨)
To explain a bit more:
Style ① represents a crease that remains visible even when the eye is closed.Style ② represents a stylized version of the natural fold of the eyelid.The only real difference is where you draw the line!
In my opinion, style① tends to look cuter and more youthful, while style ② gives off a cooler, more mature vibe.
When using Style ①, I personally like to keep the crease width the same as when the eye is open—or maybe even a tiny bit wider.I also like to angle the inner corner slightly inward.
For the smiling closed-eye, the crease is even easier!Just slide it downward to match the lashes—done!Just be sure to match the horizontal width 👍
https://drive.google.com/file/d/1YQzZLci3UrCE5wPcDYNQ66uFn4NjXW1I/view?usp=sharingAnd that’s it—the eyelid crease is complete! ✨
【Essential】 Mesh Division and Deformation for the Sclera (White of the Eye)
Let’s keep things moving—next up is the sclera, or white of the eye!
Here’s how I divided the mesh:I created a loop of vertices around the outer edge, and placed a few additional points in the center.
The way we deform the white of the eye is a little unusual—but still simple!So keep a close eye on this part.First, as always, add keyframes to the 〇EyeL Open parameter.Then, squash the sclera vertically to match the height of the closed eye.https://drive.google.com/file/d/1Ko2pBZa05M6KKeqcRXSBx7m_VbKybLqC/view?usp=sharingNext!Use the Deform Brush to tuck any parts that are sticking out behind the lashes!https://drive.google.com/file/d/1B5wxD7r9phwzffgezfXyZ-HEwGcA2KTO/view?usp=sharingNext, let’s create the smiling closed-eye version as well—but first, here’s a little trick!
Add a deformation path while the eye is in the normal closed state.
Once that’s done, set a key on the 〇Smile parameter, and move the control points. The sclera for the smiling closed-eye version is done in no time! 🥰https://drive.google.com/file/d/1aA20KPjLz7MqnYxPlpDXhrtXW7gKMX8O/view?usp=sharingWiht the part roughly hidden,temporarily turn off the visibility of the Eyelash Large part,and fine-tune the position of the sclera to match the outer corner and lower lashes.This way, even in a half-closed state, the white of the eye won’t look misaligned—it’ll stay perfectly in place! ✨https://drive.google.com/file/d/1VEbcIG3z7M5A_uAx4N4MxsfotoBO5Coi/view?usp=sharingAnd with that, the sclera is complete! So easy~ 🎵
【Optional Deformation】Mesh and Deformation for the Eye Bag
Next is the eye bag. “What even is that?” you might ask—
It’s the highlight under the eye! I add it here to create the effect of glittery shimmer under the eye, like putting sparkly makeup on the tear bag area.
This kind of under-eye part doesn’t have to be rigged, so if you're feeling lazy, feel free to skip it.But rigging it will make the cheeks look more connected to the eyes, like the skin is actually moving—bringing more life to the model. If you’ve got the time, give it a try!
The mesh looks something like the image above. For small dot-like parts like this, you can efficiently create the mesh by surrounding the shape with a hexagon and placing a single point in the middle 👍
Then we’ll add a deformation path to it—Yep, just like this. Just connect the dots lol.
https://drive.google.com/file/d/13xl03m-RD1mtAEUymGcu9R2hrEb-QnPI/view?usp=sharingUse the deformation path for rough positioning.Fine-tuning can be done more easily with selection tools.
There’s a little dip between the lashes where the highlight sits. As long as you maintain that positional relationship, there’s nothing special to worry about. If you’ve made it this far, this part will be a breeze!
https://drive.google.com/file/d/1DPaCEGwndS4KttW4B1i7d6hhDGyb6hvP/view?usp=sharing
It looks a bit weird right now because only the cheek blush is showing, but we’ll animate that later too, so don’t worry!
【Optional Depending on Model】Mesh and Deformation for Sclera Shadow
Next is the shadow on the sclera.I separated it for Nyan-chan, but depending on the model data, it might not be separated.If it isn’t, and it’s merged with the sclera, you can skip this whole section.
To be honest, whether you separate the sclera shadow or not is totally up to you. However, in the case of Nyan-chan, the sclera shadow is layered on top of the iris, so separating it actually makes the model look better.
https://drive.google.com/file/d/1WkFVKSC0fhXTxSC5zq3c9HqX-Bh4HZ0_/view?usp=sharing↑When the shadow on top of the iris moves, it adds a nice dimensional effect! ✨
Now, here’s the mesh. Pretty basic and typical.BUT WAIT!!!! If you’ve been reading this series properly from the beginning, there’s a major trap here you need to be aware of!
Let’s go back three articles.
In the very first Live2D tutorial, you clipped the sclera shadow with the sclera, didn’t you?
The clipping section should have the sclera set. (Ignore the renamed IDs in the screenshot—they’re changed for clarity. Normally they would look like ArtMesh[number].)
So if you enter mesh edit mode (Ctrl + E) in this state, only the clipped region (the sclera area) will be visible.
This is a MASSIVE TRAP!!! One of the most common mistakes beginners make!!!If I didn’t say anything and just moved on, probably 98 out of 100 people would make the following mesh:
But wait!!! Before dividing the mesh, try removing the clipping and see what happens.↑ Just hit Backspace or Delete while the clipping ID is selected, then press Enter. That removes the clipping.
Now look what happens:But when the part is clipped, those outer parts aren’t visible at all in mesh edit mode, so when you’re rigging distributed data (i.e., data you didn’t build yourself) and you’re a beginner, it’s super easy to mistakenly think those areas don’t exist, and you end up mesh-editing without them — a huge oversight.
This is why, way back in the first tutorial, I mentioned that "Skip this section if you don't mind the visual issues or you want to avoid unnecessary steps." >_<
Yes, it's super annoying, but you absolutely need to:
Remove the clipping
Edit the mesh
Re-apply the clipping
It’s a pain, but I chose cuteness and motivation (by previewing the model clipped early on) over efficiency.Also, I knew it would be way too hard to explain the double-work issue to total beginners up front—so I waited until now. Sorry about that(´;ω;`)
Anyway! The main point here is:Always remove clipping before editing the mesh of a clipped part!! Don’t worry—I’ll remind you every time we hit one of these in this series. 👍
https://drive.google.com/file/d/1_Jb3Cno6jIPY39tO07XY_q5dei5uPCfl/view?usp=sharing
It’s easier to deform from the smiling closed-eye version. There’s nothing special about the deformation itself—same routine as before: Move → add deformation path → deform → tweak with the brush.
One small tip: for parts like this that extend outside the mesh, switching clipping on and off as you go can help improve quality.
In the video above, I was oddly particular about positioning, but honestly, even rough placement looks decent for sclera shadows.
Like in this image, I personally think it looks most natural if the bottom edge of the shadow aligns with (or slightly extends below) the bottom of the lashes when the eyes are closed.
https://drive.google.com/file/d/1AlVtsPEIEc6u6TF3tGgfyNa3iZjVDnhJ/view?usp=sharing
I'll just post the video for the normal closed-eye version.The process is nearly the same as the sclera deformation earlier.For some reason, I started using the deformation brush instead of the deformation path midway through. Why? No idea.Feel free to use whichever method you prefer lol.
------------------------------------------------------------
And now for the unfortunate news... This article ends here (´;ω;`)
Will I ever finish this eyelash tutorial...? It’s honestly taking so long that I feel like nobody even needs it anymore. So starting next month, I might try mixing in other content too!
Maybe download resources again, since writing these takes forever lol.
Real talk: download content takes way less time and is in higher demand — LOL But still, I want to write these kinds of guides even if they take time.
I just hope they help someone someday (´;ω;`)
So I’ll treat these tutorial articles more like a personal project, and I’ll look into making other content that has more demand but is lighter for me to create.
Starting next time, I think we’ll finally get to warp deformers!I’m really excited to cover this, since it’s such a core part of Live2D!
See you again soon!!