Home Creators Posts Import Register Favorites Logout

Content

Welcome back to the Beginner Live2D Tutorial series! Once again, we're continuing with eyelash deformation.

This time for real... this will be the final one!!!!!!!!!!!

Previous post here 👇

https://www.patreon.com/posts/132247790

------------------------------------------------------------------------------------------------------

Table of Contents

【Essential】Deforming the Highlight

【Essential】Eye Deformation

[Optional] Cheek Deformation

[Optional] Add Keyframes to 〇EyeL Open

Tip: Press Ctrl+F (or Command+F) and type the section titles above to quickly jump to them!

------------------------------------------------------------------------------------------------------

------------------------------------------------------------------------------------------------------------------

【Essential】Deforming the Highlight

Next, we'll be working on this—the adorable flower-shape highlight!

Usually, eye highlights are rigged after the iris has been rigged.But Nyan-chan's highlight is a bit different. It's drawn in front of the eyelashes.

Now, regarding this highlight—we won't be editing the mesh!We're going to rig it as-is, using the default rectangular mesh! lolUnlike other parts, this flower highlight doesn't go through complex deformation with blinking or angle movements. In fact, we don’t want it to deform at all. (We want to keep the cute flower shape intact no matter what!)

In cases like this, adding too many mesh divisions can actually backfire—it makes the shape more susceptible to unwanted distortion from other deformations. You'll understand better by watching the video below.

https://drive.google.com/file/d/1mjlz23JTdZg8YqRAHS5SsbhdPxwe47yb/view?usp=sharing

So, just know that slicing everything up into tiny meshes isn't always the answer. Keeping the mesh simple for parts you don’t want to deform = time-saving trick you should remember!

And noooowwwwwwwwwwwww...

Introducing a SUPER SUPER SUPER important feature!!!!!!

This one is so important that I’ll explain it here and probably again a few more times in future tutorials.

The name is—Deformer!

This green frame-looking thing!!

There are two types of deformers in Live2D. The green one is called a Warp Deformer.

Honestly, it’s surprising we haven’t covered this already. Deformers are basically a core function in Live2D—you can’t really build a full model without them.

But they're also surprisingly tricky to understand for beginners. Especially for illustrators—I remember being super confused when I first started using Live2D. I struggled with deformers for several days 🚦

A deformer is, in a sense, a box.

And a warp deformer is like a super flexible box.

Like this—it can squish and stretch in all kinds of ways. And when you modify the deformer’s shape, the parts inside move with it.

https://drive.google.com/file/d/1wh6CCzr9XzMNvhEq7_j__VgZb63IdJIU/view?usp=sharing

If you’ve done any digital drawing before, this probably reminds you of the warp transform tool in drawing software.

https://drive.google.com/file/d/1mj2r_fCPN7MBTIyzg4qAFaXFMukc8B9j/view?usp=sharing

↑ This is Photoshop’s warp tool. I think Clip Studio Paint has a similar one too! I made those earlier explanation images using this, haha.

However! There’s one major difference between these warp tools and Live2D’s warp deformers:

Drawing apps use warp tools as temporary tools. Once you're done using them, they disappear.

Live2D’s deformer, on the other hand, exists permanently as an object!!!

By linking the deformer to a parameter, you can animate it just like you would if you were manipulating a part directly.

https://drive.google.com/file/d/1ZPyXmjQl3LT08ahtC8oSAGOLDbmHaxZS/view?usp=sharing

Now, you might be thinking, "Why bother using deformers? Can’t I just move the part directly?" Good question! There are actually a lot of benefits to using deformers—but we’ll get to those later. For now, let’s make one!

To create a deformer, first select the part you want to put inside it (in this case, the flower highlight →), then click the warp-tool-like icon at the top center of the screen.You’ll see this pop up!

It has a bunch of settings, but for now just press "Create" as-is. You can change the settings later if needed!

This will automatically generate a deformer with the highlight flower→ already inside it.So convenient!

You can rig it as is, but let’s tweak a few settings while we’re here.

First, the name. It can be anything, but when you have too many deformers, it gets hard to keep track of what’s what. So it’s best to give them clear names you can recognize.I named this one "Highlight Flower → Eye Open/Close."You can rename it by changing the red-highlighted area in the image!

Next—right now the deformer has a 5×5 Warp Division (this is the default setting). Warp Division = how dense the gray grid is! It’s hard to see, but it’s currently 5×5.Let’s change this to 2×2, the minimum setting.

You can change the Warp Division by adjusting the numbers in the red-circled area of the image. Like I said earlier, we don’t want the flower highlight to lose its shape, so the goal is to keep the deformer as simple as possible—fewer control points = cleaner result.

Next, let’s slightly enlarge the deformer.

When you create a deformer by selecting a part first, Live2D automatically sizes the deformer to match the part exactly. But that can feel a bit cramped! If you want to adjust the inner part manually later, it might end up sticking out of the deformer.https://drive.google.com/file/d/1A96kN8tG-o1ghQOylgFcT542J0bonj7x/view?usp=sharing

Even if an object inside sticks out beyond the boundaries of its deformer, Live2D will still try to calculate its motion automatically based on the shape of the deformer—to some extent, at least.However, this does come at the cost of slightly heavier processing.

https://drive.google.com/file/d/11Av_7Ws1hCvfJ2sX_Ps2ZFBLRfJbE62U/view?usp=sharing

Now, I said "slightly heavier processing," but these days, most tracking apps for VTubers can handle high-capacity models just fine. So in most modern setups, you don’t have to worry too much about parts sticking out of the deformer.※ In the past, if a part extended beyond the deformer, you’d often get errors and things would stop working entirely. And for games, anything that increased file size was a no-go, so “absolutely no overflow” used to be the rule. Things are way more flexible now, thankfully (´・ω・`)

※ That’s also why you’ll find two kinds of modelers out there:some who are totally okay with letting parts stick out, and others who are absolutely against it. It's all rooted in those past experiences.

That said!!If you go too far and let things stick out everywhere, you’ll start to see all kinds of unintended behavior.

https://drive.google.com/file/d/15fAa9LLGB25mzT1NNBTJwey0zJWmzfDn/view?usp=sharing

So personally, I belong to the group that thinks “it’s better not to let parts overflow too much.”

If the overflow is excessive and starts causing strange movements, I’d rather avoid that.

That’s why I try to make the deformer just a little bit bigger than the part inside it, so it doesn’t feel cramped.🤣

That was a bit long-winded, but with that in mind, let’s go ahead and resize the deformer!

If you just resize it normally, the flower highlight inside will get stretched along with it.But! If you hold Ctrl while dragging, you can resize only the deformer, without affecting the part inside.(I bet even a lot of intermediate users don’t know this trick—it took me about a year to discover it myself!)https://drive.google.com/file/d/1I-7FY5rOD7UcWZME2Hjf2E7dWTHGJ2dr/view?usp=sharing

We want to move the deformer without changing its aspect ratio or center point, so while dragging, hold down Ctrl + Shift + Alt at the same time. Yep, your left hand's got a lot to do here!

These are the shortcut keys:

Hold Shift while scaling = scale without changing aspect ratio

Hold Alt while scaling = scale from the center

I feel like I might have mentioned this before, but I can’t remember, so I’ll say it again just in case!

Alright, that wraps up the prep work for the deformer! Let’s finally start rigging.

With the new deformer selected, let’s key it just like before on the parameter labeled "〇EyeL Open," and move it along with the eyelash deformation!

https://drive.google.com/file/d/1XFOsq4WPyvnNx9rvpsHOyyM5n-gzDAfv/view?usp=sharing

https://drive.google.com/file/d/10DAl5ZUUCuScixcUnKlrdVbAcdInL2M4/view?usp=sharing

The movement itself is super simple! Even at this stage, it already looks cute, but let’s go one step further.

This time, we’ll directly assign a key to the part “Highlight Flower →.”First, place two regular keys like always, then add one more key at the very subtle value of 0.05.

(↑ It shows as 0.1 on screen because it rounds to the nearest tenth, but the actual key is at 0.05!)

When you want to place a key at a value like this—one that’s not at the start, middle, or end—just type the value directly into the number field circled in red. Then click the [+] button (circled in green) from the menu on the right side of the parameter list. That’ll insert one key at that precise value!https://drive.google.com/file/d/1XnTgERnIC9zS2SkGHMKDME4JUQOHzwzp/view?usp=sharing

Now, set the opacity to 0% when the parameter value is at 0.

What happens when you do that?

https://drive.google.com/file/d/1eJkFFg-1l6nSWVvV14j9O-8tscbeaCLL/view?usp=sharing

Just like this—the highlight disappears right at the moment the eye fully closes!

Whether or not you want to make the highlight disappear during blinking is totally a matter of personal taste. Feel free to copy this or skip it!

BUT—if you do want the highlight to disappear, and you just use the usual two-key method to control opacity, the result creates this weird feeling, like it’s stuck in a subtle disappearing state during a half-blink.

https://drive.google.com/file/d/1xkdyqo8P5zKS-Qc3pgqMzCVRmGk21lRp/view?usp=sharing

I might’ve said this before, but VTubers are the kind of creatures that tend to be in a half-blink state.So making them look cute even during those moments is super important!

↑ Creatures of half-blink lol

That’s why I wanted to share this technique for keeping the highlight fully visible until the very last second before the eyes close ✨

By the way, I personally fall into the “always-show-the-highlight-no-matter-what” camp. But overseas, it seems like some people purposely make the highlight disappear in half-blinks to better express emotional nuance.

Here’s a comparison sketch. A lot of Disney-style or Western cartoon animations follow the bottom approach. If you’re curious, compare blinking styles between Japanese and overseas VTubers! Both are super cute 💕

When you’ve finished deforming the upper highlight, let’s move on to the lower one!The steps are exactly the same, so I’ll skip the details—just move it to follow the lower eyelashes and you’re good to go✨

https://drive.google.com/file/d/1ZucyenokacjOHDUeIn_WOFyZidgi37t0/view?usp=sharing

Now, here’s the answer to the question I forgot to mention earlier: “Why bother using a Deformer? Why not just move the parts directly!?”

The short answer is: “You can lighten your workload by dividing deformation duties between Deformers and ArtMeshes!”

※ That might be an unfamiliar term, but an ArtMesh is simply a hybrid of a Mesh and a Part.

↑ A combination of the vertex-based mesh and the original illustration = ArtMesh.

Think of the official term for Parts in Live2D Cubism Editor as ArtMesh, and you’ll be fine. As you’ve become more familiar with Live2D over the course of these articles, I’ll use:

“Part” when speaking broadly (including non‑Live2D work)

“ArtMesh” when specifying Parts within Live2D

I won’t call mesh‑splitting “ArtMesh splitting,” but you’ll definitely hear phrases like “directly deform the ArtMesh!” So please commit the term to memory.

For example, with the eye highlight in this tutorial, we’ve divided the tasks into:

Overall movement with a Deformer

Opacity changes with the ArtMesh

If you tried doing this with just the highlight ArtMesh… you’d end up having to keyframe a delicate value like 0.05, which would massively increase the number of deformation points required!

https://drive.google.com/file/d/1KroJ9B1yPoV9Rr2O7rZuyN-LvRT_Mgdt/view?usp=sharing

↑ This video shows the highlight ArtMesh being moved alone.You can see how it’s repeatedly nudged little by little 💦

↑ When you’ve keyed more than one parameter, you can merge them by clicking the button to the left of the parameter’s name. This makes it immediately obvious how many adjustment points there are.

This time it’s just 3×2=6 points, but imagine what happens when you’re working with 4×3 or 3×3×3 key combinations! 💦

By letting the Deformer handle the positional movement of the blink and having the ArtMesh only manage opacity, we eliminate the need to move the ArtMesh itself—and the Deformer can skip the 0.05 keys—making deformation far more efficient!

↑ Because the Deformer isn’t keyed at 0.05, the total number of required keyframes is reduced.

This kind of “role separation via Deformers” is an essential skill in Live2D. The highlight deformation we’ve covered so far is still relatively simple—an ArtMesh alone could handle it—but for more complex deformations involving many parameters, Deformers become indispensable.Mastering the difference between Deformer and ArtMesh-based deformation brings you one step closer to working like a pro! ✨Here’s another useful technique I want to share: this button!

Once you start using Deformers, you’ll notice that even when nothing is selected in the modeling view, faint Deformer outlines remain visible.

These outlines are... incredibly annoying!!!! 😂

If your model becomes very detailed, it can get really bad 👇

In situations like that, pressing the button mentioned earlier will temporarily hide those faint Deformer outlines! It’s a super handy feature, so definitely make use of it.Personally, I toggle between showing and hiding them hundreds of times while rigging a model 😂

https://drive.google.com/file/d/10_L3Ayj_iQTNu9MwVd879oMZHDfm9i56/view?usp=sharing

-----------------------------------------------------------------------------------------------------------------

【Essential】Eye Deformation

Next up: another phase where Deformers shine—we’ll rig the eyes! At this point, you can really feel like we’re almost done with the blinking motion ✨

https://drive.google.com/file/d/1brPA8CmED5WLevQnx3ERLF3E5UnKxe7j/view?usp=sharing

Let’s start by checking the mesh layout. This time, we’ll rig three parts at once!

These three parts are clipped to the sclera (white of the eye), so just like before, we’ll temporarily remove the clipping before splitting the mesh (a bit of review from the previous lesson!).

There’s nothing particularly special to mention about the eye reflection and eye highlight parts, so go ahead and place the vertices as shown in the images! (For clarity, I’ve used solo display (S key).)

I think I used automatic mesh generatior for the lower highlight. For simple shapes like this, auto‑generatior creates a clean enough result.

The main eye part, however, is meshed with more detail and complexity.Be sure to place vertices around the boundaries of shadows and the pupil!It’s a bit tedious, but creating a finer mesh now will make it easier to add depth to the eye later ✨

Even when placing multiple detailed vertices like this, the basic rule still applies: don’t place them right on the boundary, but slightly inside or outside instead. Think of hitting the blue line, not the red line.

That’s it for the mesh layout!

We’ll now add one more detail to the eye reflection and eye highlight.

These two parts have unusually long names, right?

Words like “Add (50%)” or “Add (60%)” are there as “part state notes.”

The “xx%” refers to opacity. These two parts had their layer opacity lowered from the beginning, when they were painted in an illustration app.

Live2D preserves the imported opacity, so no need to adjust anything!However, when tweaking opacity during rigging, it’s easy to forget the original values. That’s why I like to note the numbers in the name ahead of time ✨

And the other term—“Add”—might sound unfamiliar. It refers to a blend mode!Artists will recognize this term right away—illustration apps allow you to change the blend mode of each layer, affecting how colors interact with the layers below.

Let’s compare some blend modes using the shadow on the sclera.

Left: Original colorMiddle: Blend mode set to NormalRight: Blend mode set to Multiply

In the previous article, I mentioned how Nyan‑chan’s sclera shadow sits in front of the eye. As you can see, in Normal mode, the shadow is applied evenly regardless of position, distorting the iris color in a way that looks unnatural.

By using the Multiply blend mode instead, the shadow color gets added to the base eye color, producing a more natural look ✨

Currently, Live2D Cubism supports three blend modes:

Normal – basic, no blending

Multiply – darkens colors, as explained

Add (Additive) – lightens overlapping areas, often used for highlights!

↑ From left: Normal, Multiply, Additive

Going back to the highlight and reflection parts—they’re both labeled with “Add,” so they’re meant to use the Additive blend mode.

But for some reason, Live2D Cubism Editor loads Multiply mode correctly, yet converts all Additive layers to Normal layer by default 😭

Hence, the long explanation! 😂

It’s a bit tedious, but make sure you manually switch any “Add” parts back to Additive blend mode!

https://drive.google.com/file/d/1R24nYP2F_tNFmcRRxMUILwlVJi3H5EGr/view?usp=sharing

(And yes… I just now realized that in the distributed blink sample from a few tutorials back, “Add (60%) Eye Highlight 1” was accidentally left on Normal mode… 😭 Thank goodness I labeled it! Please fix it on your end too 🙏)

That wraps up the prep work for the three eye parts!

With all three selected, go ahead and create a Deformer. This will generate a single Deformer containing all three parts!

I named mine “Eye → Open/Close”.As before, hold Ctrl+Shift+Alt and resize the Deformer generously.

Set the Warp Division to “10×10.”

Quite detailed compared to the highlight one! This allows for more complex deformations.

Then, key the “〇EyeL Open/Close” parameter and apply this kind of transformation!

https://drive.google.com/file/d/1osNCTG_GP2hnhGmBp4RpmNSIoQ5PfouS/view?usp=sharing

Looks like a much trickier deformation, right? 😂

Here’s how it works:

Align the center of the Deformer to match the closed eye

https://drive.google.com/file/d/1n51CeexVn3lGGm3rc7jLeIqHzaAkXRIm/view?usp=sharing

Compress it verticallyhttps://drive.google.com/file/d/1vcKkm_osX5IP-DB3DXaEw3FhxsJsP3CZ/view?usp=sharing

Use the green Bezier handles to add curvature for a softer, rounder look.https://drive.google.com/file/d/1aYlSRxSuWKH2uvA0iSOP18tV-m3kiacl/view?usp=sharing

That’s it!

Here’s another big advantage of Deformers:They allow you to move multiple ArtMeshes at once ✨

Trying to apply this subtle transformation separately to all three ArtMeshes would be a nightmare to keep consistent… but with a Deformer, it’s easy!

Let’s compare the eye with and without the deformation.

Can you tell the difference?

https://drive.google.com/file/d/1fuHgMEeuWfsTogEuxMW8CDQy5zWOXEpA/view?usp=sharing

It’s especially obvious when the eye is half‑closed. Without this deformation, the pupil gets hidden behind the lashes, and the eye loses its focus 💦

A real person’s eyes don’t move this way when blinking, but—like I said—VTubers tend to be in a half-blink state, so this ensures the pupil is always visible!

I still remember how impressed I was a few years ago when I heard an animator mention using this technique in anime—it really opened my eyes.

https://x.com/ky_anime_lab/status/1633075217324191746

(I even quote-retweeted it back then, so some of you might remember!)

https://x.com/himono_vtuber/status/1633452483262697475

At the time, I didn’t know this was already a technique used in animation. It made me realize that pushing for the cutest possible expressions naturally leads to this kind of solution 💕

These kinds of production hints aren’t limited to Live2D—they’re everywhere! It’s really valuable to soak in ideas from all kinds of sources.

Oops, going off-topic again 💦Let’s now do the smiling-eye deformation!

Smiling eyes don’t lower the lashes as much as closed eyes, so the deformation will be milder.

https://drive.google.com/file/d/1b9N3Rb2FxJs6CjWNcFYaVZPyybtt0ab2/view?usp=sharing

And that completes the eye! We’re now just a few steps away from finishing the full blink ✨

[Optional] Cheek Deformation

Next up, let’s rig the cheeks!

”Wait, we’re rig the cheeks too?”You might be thinking that—normally, you don’t need to rig them at all! 😄(That’s why this section is labeled “optional”.)

However, in Nyan-chan’s case, if we leave them as-is, the blush on the cheeks becomes super noticeable when the eyes close.

You could pass it off as makeup… but even then, it’s a bit too red! (Is this Kabuki makeup?! 😂)

So in this section, I’ll show you how to tone down that redness and, as a bonus, how to slightly move the cheeks during blinking.Doing so gives the impression that the skin is subtly shifting, which adds realism. If you like the result, definitely consider including it! ✨

https://drive.google.com/file/d/1zx_mgumb44zYc00_in7KolHl1KJmfewX/view?usp=sharing

Let’s start with mesh creation!

For ”Cheek→”, I used automatic mesh generator and then manually tweaked it.

After fiddling with the values to get the mesh to a nice density, I cleaned up any areas where the vertices were uneven.

https://drive.google.com/file/d/1r83Sld4U5txl-E3DhXo7WHRbpB9LcJfe/view?usp=sharing

↑ Here's how the automatic mesh generator and tweaking process looked. Since OBS doesn’t record pop-up tabs, you can’t see the values I changed—sorry! 💦 But hopefully the vibe comes through.

The ”Cheek Highlight→” was done exactly the same way as we did with the Eye highlight.

Once the mesh work is done, select both the cheek and cheek highlight,just like we did for the eyes, and create a deformer. I named mine ”Cheek→EyeOpen/Close”.

Next, for now let’s ignore the blush and go ahead and deform the cheeks like this:

The shape should resemble a trapezoid that narrows toward the bottom. I also slightly compressed it vertically from the top.

I got a little stuck partway through, but here’s a video of how I went about deforming it—blinking the eyes repeatedly while adjusting the cheek deformer to match the closed eye shape, slightly warping the top upward to align with the eyelid seam.

https://drive.google.com/file/d/1J5nXdx9gbZ_ZqKFTzWA22rm8yneJ5F1K/view?usp=sharing

Now let’s make the “smiling eyes” too! Use the heart-shaped highlight as a reference to align everything.

https://drive.google.com/file/d/1t4RfcshAs2ukErtXVHAnqTfEKmlnU0ps/view?usp=sharing

Once the rough deformation is done with the deformer, it’s time to directly deform the ”Cheek→” ArtMesh. Use the Deform Brush to boldly push it inward!

https://drive.google.com/file/d/1JrP073WfLwMnrqoiaw3O12Twj4K_LMxJ/view?usp=sharing

Do the same for the smiling eyes—use the deform brush to tuck in any blush that’s peeking out.

https://drive.google.com/file/d/1UWu0njv9adjI0t7FdrhdO4mrc_Z0SlaK/view?usp=sharing

And with that, the cheeks are complete!

[Optional] Add Keyframes to 〇EyeL Open

We’re finally at the last step!

Have you noticed all this time that the number of keys on the “〇EyeL Open” parameter has been different between your screen and mine?

↑ Most likely what your screen looks like

↑ Sometimes, my screen (Kanbutsu Himono’s) looks like this

The step of “adding a key to 〇EyeL Open” was actually something I did at the very beginning when I was preparing the sample data. However, for the tutorial, I changed the order and decided to explain it at the end (which is right now!).Because of this, there’s been a mismatch this whole time.I’ve mentioned a few times that I’d explain the extra key later, but I imagine some of you may have been confused. Sorry about that! 💦

Now, we can finally talk about what this mysterious key is all about!The value we’ll be adding is 0.7.

Believe it or not, this key at 0.7 does exactly the same deformation as the one at 1.0!See the blue circles — they’re undergoing the exact same transformation!

https://drive.google.com/file/d/1dcQdPUN86TQMm00ZwcRBfO5SG-eXGGiR/view?usp=sharing

As you can see, there’s absolutely no movement between 1.0 and 0.7. This essentially means the blink won’t begin until the value drops below 0.7.

So... why go through all this trouble?As I’ve mentioned several times in this article: VTubers are creatures that tend to end up with half-closed eyes.

When you're using tracking, the blink parameter often hovers between 0.9 and 0.7.If you're using the default method with just two key points, the model rarely has the chance to fully open its eyes.

↑ In actual tracking, this tends to be the default. Still cute though, lol

So by deliberately adding a key at 0.7 with the same deformation as at 1.0, we’re telling Live2D to “keep the eyes fully open until the value dips below 0.7.”

↑ The eyes stay fully open even at the same value!

This is a niche trick made specifically for VTuber models ✨

Now that you know the reason, let’s go ahead and add the key!

Here’s what to do:

Right-click anywhere on the “〇EyeL Open” parameter bar

Hover over the “▽” that appears in the menu on the right

Click “Select”

https://drive.google.com/file/d/1mYTzZ22f7x5Rrsj0q0UBOXxb0WdP6C4p/view?usp=sharing

This will select all the objects linked to the “〇Left Eye Blink” parameter!

Next:

Right-click the “〇EyeL Open” parameter bar again

Hover over “▽”

This time, click “Adjust”!

https://drive.google.com/file/d/1wu0rzOa1bmlEAlvMf9ztjfKPxcReigQQ/view?usp=sharing

You’ll see a window like this. Under the “ Value Adjustment” tab, you can change the values of existing keys.

Let’s use this tab to change the value from 1.0 → 0.7!Once you’re done, press OK.

https://drive.google.com/file/d/1LNLPhZTs66a9d1JIHoKAHhB9jbsTTI4h/view?usp=sharing

When you do that, the key at 1.0 will be changed to 0.7.Since there are no keys above 0.7 now, the linked objects will disappear. (What!?)

It might be a bit alarming at first, but don’t panic! Just click the usual “Add 2 Keys” button!

https://drive.google.com/file/d/1a4GY3ychUR4VHhQJE-GGdUkK8Xfx1-_i/view?usp=sharing

And ta-daa ✨The “Add 2 Keys” button will automatically place keys at the minimum and maximum values (though in this case, the minimum key is already there), and the eyes will reappear!

And when a key disappears partway through like this, Live2D automatically places a new key with the exact same deformation as the last visible one.

So instead of manually rig the 0.7 shape:

Change the key value at 1.0 to 0.7

Use the “Add 2 Keys” button to bring the rest back

With this method, you can easily add the key without doing any extra work 😂This is a huge time-saving tip you can use anywhere, so be sure to remember it! (≧∇≦)

Also, when something suddenly disappears like “Huh!? My part just vanished!?!?!”, it’s usually because a key is missing partway through — knowing that will make it much easier to troubleshoot.

-----------------------------------------------------------------------

Fuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuu—!!

And with that, we have officially completed the blink for one eye! ✨✨✨✨✨

https://drive.google.com/file/d/1ySB2IZHaV266oFS5M7to7Fl5bkBb3BPL/view?usp=sharing

So cuuuuuuuuuuuute!

Honestly, I never imagined it would take four whole articles just to cover blinking for one eye.If you’ve made it this far, you’re seriously amazing. (´;ω;`)(´;ω;`)

To be completely honest, I don’t think even many pros go to this level of detail—So if you’ve managed to learn and implement everything up to this point,you’ve probably jumped 10 levels ahead and become a full-fledged blinking master!

Next time, we’ll finally be diving into the long-awaited, super anticipated step:Eye Physics!Look forward to it~ ✨✨

See you again soon!

Files

Comments

No comments found for this post.