Home Creators Posts Import Register Favorites Logout

Content

Let's continue with the beginner's tutorial this month! It's the continuation of physics calculations!

Previous article is here

https://www.patreon.com/posts/high-quality-for-138248155?utm_medium=clipboard_copy&utm_source=copyLink&utm_campaign=postshare_creator&utm_content=join_link

-------------------------------------------------------------------------------------------------

<Table of Contents>

[Optional] Correcting the sway of highlight flower → (About extended interpolation)

[Optional] Rigging the sway of highlight lower →

[Optional] Rigging pupil movement ①

[Optional] Rigging pupil movement ②

[Optional] Rigging eyelash sway (About the blend forms feature)

[Optional] Rigging reflection light sway

[Optional] Rigging eye sway (About deformer hierarchy)

~Bonus: Rescue method when mesh edit mode bugs out midway~

※You can easily jump to the relevant section by inputting the table of contents above with Ctrl+F (or command+F)

※From here on, we'll be using blend shapes extensively, but "blend shape" and "parameter" overlap in meaning in many places (to put it roughly, blend shapes are one type of parameter), so there will be many inconsistencies in notation, calling blend shapes either blend shapes or parameters. I apologize, but please judge from context 🥺 Keys that are round are parameters in the narrow sense, and keys that are square are blend shapes in the narrow sense!

-----------------------------------------------------------------------------------------------------

[Optional] Correcting the sway of highlight flower → (About extended interpolation)

Last time we ended with the process of rigging rotational movement for the ★→pupil highlight 2 parameter! This time we'll start by applying "correction" to that movement.

As a test, try confirming the movement of ★→pupil highlight 2 that we made last time while sliding the parameter.

https://drive.google.com/file/d/1fOIj0gbYAy1go-gDwx2jqmN6NhHzfdgS/view?usp=sharing

Actually, when you rotate a warp deformer or art mesh, the shape between keys becomes distorted (becomes smaller in this case) if left as is.

https://drive.google.com/file/d/1UpeCOCQwQ6BiazesHK8h3tUKQIt_6jRz/view?usp=sharing

↑Footage comparing when ★→pupil highlight 2 is at 0 and at 0.5. You can see it becomes slightly smaller at 0.5.

Explaining why this happens would take us off-topic, so I’ll skip the technical details here.

If you’re curious, check out the section on Warp Deformers in this article:https://www.patreon.com/posts/113783569

Think of it as the same phenomenon, but happening to an ArtMesh instead of a Warp Deformer.

The article above contains many difficult topics, so for now just remember:

Warp deformers and art meshes become distorted between keys when rotated directly

Only rotation deformers don't distort (this is a feature that hasn't appeared yet, but we'll eventually use it too)

That's all you need to know for now! Distorts → warp deformers・art meshes Doesn't distort → rotation deformers

So, for warp deformers and art meshes that distort as is when rotated, you need to apply correction.That's this, "extended interpolation"!

↑Can you see the many blue dots lined up between the keys?

If you use this extended interpolation, the shape won't distort!!

https://drive.google.com/file/d/1l4hWqgMYsTolFjEt4rxrtO5pdc4B8FL8/view?usp=sharing

Extended interpolation is a feature that interpolates the movement between keys moving in a straight line into a curve.

↑The upper example in the video is before extended interpolation, the lower is after interpolation. It smooths out the jerky straight-line movement with correction.

This extended interpolation will be used super super super super super extensively from now on. We'll use it thoroughly. So please learn how to use it!

First,

The object you want to add extended interpolation to (this time highlight flower →)

The parameter you want to add extended interpolation to (this time ★→pupil highlight 2) With "both" of these (←important here!) selected, click the mark like three lines at the top right of the parameter palette and select "Extended Interpolation."

If successful, an extended interpolation tab with "Linear Interpolation" written on it will appear.

When nothing is written as in the image below↓, you've failed to select the object (deformer or art mesh) and parameter. Be sure to select "both the object and parameter you want to add extended interpolation to"!

Then next, change "Linear Interpolation" to "Ellipse Interpolation."

There are two types of interpolation: "Elliptic Interpolation" and "SNS Interpolation" ("Linear Interpolation" means no interpolation), but Kanbutsu Himono uses elliptic interpolation almost exclusively. SNS interpolation is difficult to use and I rarely use it... I'll talk about the difference between the two when the time comes to use SNS interpolation.For now, don't think too hard and just select elliptic interpolation!

After that, adjust the "points" in the interpolation adjustment section.It's set to 5 by default, but I always change it to 3. By changing this points, you can decide how many points to have between keys.With 3 it looks like this↓

The larger the number, the smoother the movement becomes, but it also becomes heavier.I settled on 3 points as a result of seeking "the lightest yet smoothest number"!

You don't need to adjust the scale below that.This is also complex, so I'll omit the explanation this time. Since I've omitted so much, if you're curious please check the official help!

https://docs.live2d.com/en/cubism-editor-manual/extended-interpolation/

The correction is now complete!

---------------------------------------------------------------------------------------------

[Optional] Rigging the sway of highlight lower →

Next we'll move the small highlight on the lower eyelashes. Let's make this one just expand and contract!As before, we'll directly link the art mesh to a parameter. The point is to link it to the "★→pupil highlight 2" parameter, not the "★→pupil highlight 1" parameter!

Press Shift+Alt keys while scaling.If you forgot, read "[Optional] Creating highlight “flower” sway" from the previous article!

https://drive.google.com/file/d/1ooPLbsuerdrJdVNmCbd7s6jNY62VSlLQ/view?usp=sharing

Then, it becomes a movement like... the flower highlight rotates while the lower highlight expands and contracts at the same time.

This "deviation in movement" becomes very important in creating physics calculation movements.

https://drive.google.com/file/d/1FPe7wbr9KH0zZoigWiN0CPbnkteCydwP/view?usp=sharing

↑This movement is the expansion/contraction movement of highlight lower → linked to ★→pupil highlight 1.Since both the flower highlight and lower highlight expand and contract at the same timing, doesn't it look "too aligned and unnatural"?

https://drive.google.com/file/d/1CKXtEQWNJ1IQGVqeBa4JxSA20vOKd-hJ/view?usp=sharing

Compare this to linking the expansion/contraction movement of highlight lower → to ★→pupil highlight 2.Can you see how the timing of the expansion/contraction movements of the upper and lower highlights is offset, creating a sense of randomness and making the movement more lively! This one has more of a "teary-eyed" feeling, right✨

Of course, you could also create a new parameter (blend shape) like ★→pupil highlight 3 and move highlight lower → with that parameter, but when parameters increase too much, management becomes troublesome, so I integrate parameters for movements that seem fine to integrate.

This time we're getting by with just two prominent highlights, but with an eye drawing style that has many many more highlights, depending on the situation you may be forced to introduce a ★→pupil highlight 3 parameter.Let's respond flexibly to this area!

------------------------------------------------------------------------------------------

[Optional] Rigging pupil movement ①

Next we'll create the movement of "★→pupil 1"!I said "pupil" but strictly speaking it's "the entire pupil contracting movement."Since this is a movement that would never occur in real humans, I don't know what to call it so I'm just calling it pupil movement.

https://drive.google.com/file/d/1wgYFK8ARhXiGftfv92WwkbEMx4tFvrEb/view?usp=sharing

↑This kind of movement doesn't occur in real humans (but it's super popular as an anime expression so we'll incorporate it)

https://drive.google.com/file/d/1QwOl3T8TGrkROHmqtnw7cJCx9Fr-ZzWr/view?usp=sharing

↑A movement that occurs in real humans too. We'll make this later as the "★→pupil 2" movement.

Now, we'll create the ★→pupil 1 movement by utilizing the existing "Iris→ Eye Blink" deformer. Link the Iris→ Eye Blink deformer to the ★→pupil 1 blend shape (make sure it's properly a blend shape) and when it becomes -1, make it smaller while pressing Shift+Alt keys.

https://drive.google.com/file/d/1zK79O4YM31UXbBgUwvXR1Ge_2M9wFqz-/view?usp=sharing

How small to make it is up to your preference!The smaller you make it, the more exaggerated and cartoon-like the expression becomes.

When the value is 1, don't add any movement. The point is to make it only become smaller when it's -1.

https://drive.google.com/file/d/1Qcw2eKDETLXW2JKWr12USUdvJZaBfJP4/view?usp=sharing

------------------------------------------------

[Optional] Rigging pupil movement②

Next let's create the pupil movement that could occur in real humans too!

https://drive.google.com/file/d/1LA1jE-vK2nyGJn6cYedlOdQjxiIZqKFm/view?usp=sharing

Next, directly link the "Iris→" art mesh to the ★→pupil 2 blend shape. Use the lasso tool to surround and select only the pupil area, and change the size while pressing Shift+Alt keys as before. This time, make it smaller at -1 and larger at 1, changing the size at both!

https://drive.google.com/file/d/1v2Dy2fSBrZ7qdOTkEQfHEd9i0ak09_z9/view?usp=sharing

How much to expand and contract is also up to your preference. You can adjust it as much as you want even after making the physics calculations, so being rough for now is fine!

------------------------------------------------------------------------------------------------

[Optional] Rigging eyelash sway (About the blend forms feature)

※In the YouTube membership video, "Rigging eye sway" is done first, but to make production easier, the order has been changed in the article.

https://drive.google.com/file/d/1Ku5q4PXvpe0a9mdFmXgP5ulbuQNJuqQ9/view?usp=sharing

Let's rig a movement that sways the eyelashes like this!This is an exaggerated expression (human eyelashes are stiff so they don't actually sway)

The blend shape to link to is "★→eyelash 2." First, select both "Large Eyelash→" and "Outer Corner Eyelash→" and link them to ★→eyelash 2, then move the curved part at the corner up and down.You could move them one at a time, but then you'd have to match one movement to the other, so it's easier to move both together with the deform brush tool!

https://drive.google.com/file/d/1SO8fqJ8AnS4dGgpe67wJp3vJYSmJTAVX/view?usp=sharing

Next, link "Small Eyelash →" to ★→eyelash 2 and move the hair tips up and down as well.

https://drive.google.com/file/d/17WuHCL9x25domIfM28cqUugBX3ptB4-G/view?usp=sharing

...Yes. Those who noticed something from the video above↑ are sharp. Doesn't it look like the -1.0 movement of ★→eyelash 2 was created in an instant?????

Here I'll teach you all a new super super super super useful skill.

That is "Blend Forms (Ctrl+Shift+B)"!!!!!!!!

As those who guessed from the name and shortcut might know, this feature is a companion to "Copy Forms (Ctrl+Shift+C)" "Paste Forms (Ctrl+Shift+V)" that appeared in the past.If you forgot, read the article below↓!

https://www.patreon.com/posts/129004125

"Blend Forms" is a feature that lets you numerically select "how much to reflect" the movement copied with "Copy Forms"!!

https://drive.google.com/file/d/1Cp10uM53v1MpipYByqR4mUdY_gujgN5B/view?usp=sharing

↑When you copy the 1.0 form of ★→eyelash 2 and blend forms at -1.0, a "Blend Settings" tab appears, and by adjusting the "compatibility" value you can set "how much to reflect the copied source movement."

At compatibility 100 it becomes exactly the same movement as the copy source and the same result as "Paste Forms," and at compatibility 0 the copy source movement isn't reflected at all.

And here's the true essence of "Blend Forms"!Amazingly, blend forms can be set to negative values!!

https://drive.google.com/file/d/1ubtAkaKNpL0e0XnDHDjkkAU-y-M-kvmy/view?usp=sharing

When set to negative, the object deforms in the opposite direction to the copied source movement, and at -100 it becomes -1 times the copied source movement (complete opposite).In other words, by entering -100, you can instantly create the opposite movement for simple movements like eyelash swaying!!!!

Also, the application degree value can be used as is from the last setting. So once you use the value -100, after that you can just press Ctrl+Shift+B, and create the opposite movement with just one shortcut. A terrifying time-saving method!!!!I mainly use this -100 value for "Blend Forms," and I use either blend forms or "Reflect Motion" for most physics calculation swaying. "Reflect Motion" will also appear in this article so look forward to it!

With "Blend Forms" and "Reflect Motion," complex movements can become distorted, so I do: first blend forms -100 or reverse motion → if the movement becomes strange then manual work!

------------------------------------------------------------------------------------------------------------------

[Optional] Rigging reflection light sway

Next let's create reflection light sway. What even is reflection light sway, right? It's an exaggerated expression so that the eye looks teary by having reflection light-like areas move.

https://drive.google.com/file/d/1QL9PO2tMewomtRHo8yLfS65bDkw9YUPF/view?usp=sharing

★→pupil reflection 1 creates up/down movement, ★→pupil reflection 2 creates widening⇔narrowing movement.

https://drive.google.com/file/d/1FEOcMpLW2c1iwMrGdK5_Ag10_mnm12IH/view?usp=sharing

Except for using the blend forms mentioned earlier for the ★→Iris Reflection 2 blend shape -1.0 movement of "Add 50% Iris Reflection→," there are no points worth special mention. I think everyone who has made it this far can create this easily!

----------------------------------------------------------------------------------------------------------------

[Optional] Rigging eye sway (About deformer hierarchy)

Next is another movement that would never occur in real humans.

https://drive.google.com/file/d/1NNKVf1gyQ4NaQwwa41Q9AucNtS4MRWxZ/view?usp=sharing

It's nothing but unnatural now lol

However, there is a basis for why I'm making such a weird movement. In the world of animation, when objects move violently, there's often an expression like "the object stretches and shrinks in the direction it moved or the opposite direction."

Let's apply this exaggerated expression to the blinking! That's what this sway is all about.By linking it with blinking movement and physics calculations later, it becomes a nice "soft, bouncy" kind of movement.

To apply this movement to the entire eye, we'll create a new deformer.

※Before creating the deformer, there's a bit of an annoying explanation so please bear with me ><

First, select all the objects (deformers and art meshes) I'm about to mention.

--

Highlight Flower→ Eye BlinkHighlight Lower→ Eye Blink

Small Eyelash→Large Eyelash→Outer Corner Eyelash→Lower Eyelash→Tear Bag→Sclera Shadow→

Iris→ Eye Blink

Sclera→Double Eyelid→--

That's it! 11 objects in total.

Don't select art meshes already in deformers (like Highlight Flower → or iris →).

You don't need to do this since carelessly doing it might deselect what you worked hard to select, but in this state if you move the selected objects in the modeling view, the entire eye should move. (If you did it, don't forget Ctrl+Z!)

https://drive.google.com/file/d/1xrjqPYY6qot93j4EtpzfFNf-vync3bPG/view?usp=sharing

All eye art meshes not in deformers are fully selected. For eye art meshes already in deformers, only "the parent deformer" is selected. If you move the deformer, what's inside moves the same way, so this essentially creates a state where the entire eye is selected.

Why shouldn't you select art meshes already in deformers? That's because of the specification that "only objects of the same hierarchy can be put in one deformer."

An unfamiliar word called hierarchy has appeared. In the article "Eyelash Deformation Part4" from two articles ago, I explained "A deformer is, in a sense, a box."

https://www.patreon.com/posts/135146927

These boxes can have boxes put inside them, and furthermore, more boxes put inside those... like a matryoshka, you can keep adding contents.

When you make deformers multi-layered like this, the concept of "hierarchy" is born! Hierarchy is easier to understand visually than in text. Let's look at the deformer palette below the parts palette!

The parts palette is arranged in layer order, the deformer palette is arranged in deformer hierarchy order!

↑This is the structure of the "Nekomaguro_02_EyePhysicsEN" cmo3 file, and looking at the "Highlight Flower → Eye Blin" deformer makes the difference easy to understand. The parts palette at the top is in the same order as when the PSD was imported, but in the deformer palette at the bottom:

V Eye → Curve  V Eyelash → Curve    Eyelash small →    Eyelash large → ~omitted~ V Highlight flower → Eye Blink     Highlight flower →

Like this, it shows clearly which objects are in which deformers (which objects are children or parents of which deformers)!At this time, things in the same deformer become the same "hierarchy."

↑What I separated with different colors - red, orange, yellow, light blue - are all different hierarchies.

So, things of different hierarchies... for example "Eyelash large →" and "Highlight flower →" cannot be put in the same deformer no matter what. Looking at the diagram below↓ makes it easy to understand. Since Highlight Flower → is already in a different deformer called "Highlight Flower → Eye Blink," what can be put in the same deformer is not the "Highlight Flower →" art mesh but the "Highlight Flower → Eye Blink" deformer.

If you try to create a deformer with objects of different hierarchies selected, an error dialog appears saying "Please create an object with the same parent deformer selected."

Objects that already have deformers made have different hierarchies between the deformer and the art mesh inside, so you must select only the parent deformer. For things that are just art meshes, you must select the art mesh. By combining these, you can finally create a deformer for the entire eye... is the situation💦 Sorry it's complicated😭 But if you learn this "deformer hierarchy" specification now,I think you'll understand faster when the structure becomes more complex in the future!

Now, the explanation was long, but with those 11 objects selected, let's create a new deformer! Name it something like "Eye → curve."

Set the warp division to 12×12, quite detailed!

※I also changed the ID to "EyeLWarp" but you can do this or not, either is fine.

Let's also make the deformer size a bit larger with some margin! If you hold Ctrl while scaling, you can change the size without affecting the objects inside. (This is review from before✨)

Once the deformer is created, link it to the "★→Eyelash 1" blend shape, and with the deform brush set to about the same size as the eye, distort it vigorously up and down while holding the Shift key.

https://drive.google.com/file/d/1kk49VY37h96ZySJMD0nF-i9lqxMtL4vJ/view?usp=sharing

You can change the deform brush size by pressing B and dragging left/right on the modeling view

If you use the deform brush while holding the Shift key, you can transform without diagonal distortion

And this time too, the -1.0 movement was made with blend forms (minus 100)! Convenient, right!

------------------------------------------------------------------------------------------------------------------

We've completed this session's work.

While creating eye sway-type movements, we learned about very important features: "Extended Interpolation" "Blend Forms" "Deformer Hierarchy"

From next time, we'll finally start swaying what we made with physics calculations~! Look forward to it!

Below is bonus content. (I also wrote ~Bonus ② Method to draw guidelines in the editor~ but it became far too long so I'll save that for next time. Sorry;;)

------------------------------------------------------------------------------------------------------------------

~Bonus: Rescue method when mesh edit mode bugs out midway~

This is in response to a comment from Shiniri-san Thank you for the comment (´;ω;`)

I don't fully understand the reproducibility myself so I couldn't take screenshots,but when you're creating lots of meshes, sometimes there's a bug? where the contents of the "Tool Details" palette disappear. (The area circled in red in the image below↓ disappears entirely)

Since all functions of mesh edit mode are in this "Tool Details" palette, once the tool details palette bugs out, further mesh division becomes almost impossible.

Usually, if you exit mesh edit mode once and return, it comes back, but if you press "✖" the mesh you worked hard to create gets reset, and if you press "✅" depending on mesh progress, the appearance becomes strange like this↓.

※Only areas surrounded by mesh are recognized as art mesh, so if meshing is incomplete, things outside the surrounded area won't be displayed.

So in this bonus section:

Somehow save the mesh created partway,

Restart the bugged mesh edit mode,

Revive the display that disappeared outside the mesh range, I'll introduce a technique to continue mesh editing.

The method differs depending on mesh division progress, so I'll divide it into several patterns.

① When the mesh is closed, Method 1

"Mesh is closed" refers to when the enclosure is properly closed like you can see, and all vertices are components of some polygon (triangle).

Conversely, when it's not closed is like this. Since the enclosure isn't closed, some vertices aren't components of polygons (triangles) and remain as edges (lines) or points.

Methods ① and ② I'm about to explain can only be used "when the mesh is closed"! If even part of the enclosure isn't closed, there's a high possibility of bugs, so use method ③.

If the mesh was closed, when the tool details palette bugs out, press the ✅ circled in red above↑ to end mesh edit mode!If you press ✖ your hard work up to now will be reset, so press ✅!

After exiting, immediately return to mesh edit again. Then as I mentioned before, the display of areas where you hadn't divided the mesh will disappear.

Then, place 4-5 vertices in a large enclosure that includes the original parts including the missing areas.

In this state, press ✅ again to end mesh edit mode. (Don't press auto-connect)

Then the parts that disappeared will revive!

Furthermore, return to mesh edit mode once more, delete the surrounding 4-5 points, and you can continue meshing from where you left off!

https://drive.google.com/file/d/1bvHDoj2EpC_1B78TMgQ9LAQLY1AQinLw/view?usp=sharing

② When the mesh is closed, Method 2

Up to pressing ✅ to end mesh edit mode after the tool details palette bugs out is the same.

After that, press Ctrl+C to copy the mesh.

After copying, select something in Automatic Mesh-generator and create an auto-generated mesh. Then what disappeared will revive.

https://drive.google.com/file/d/1T9uvDgXpPKTAkpt3zB3r-OWqtFgdM3NG/view?usp=sharing

In that state, move to mesh edit mode → delete the auto-generated mesh → press Ctrl+V, and the partial mesh you copied earlier will be pasted!

https://drive.google.com/file/d/1m1uNtsnTGGhIubGa8eeievBNQ4A1q-Ke/view?usp=sharing

This was from so many months ago that if anyone remembers I'd be impressed, but

https://www.patreon.com/posts/129004125

↑In the "Eyelash Deformation Part2" article

Normal copy (Ctrl+C) & paste (Ctrl+V) → Copies & pastes the part's ID name and the part itself.

I told you that.

However, this "normal copy (Ctrl+C) & paste (Ctrl+V)" has one more function,which is 〇When you perform Ctrl+V in mesh edit mode, you can paste the mesh of the art mesh you had copied with Ctrl+C. Please remember this as it's convenient to know❤

③ When the mesh is not closed

When the mesh isn't closed, if you end mesh edit mode like in methods ① and ②, there's a high possibility of spectacular bugs, so this method can't be used.

https://drive.google.com/file/d/1CCftThYZXgQqRbhZLjzE3uwlSuk0iMW1/view?usp=sharing

↑In the worst case the mesh disappears. By the way, sometimes the auto-generated mesh is "not closed" and this happens. Worst!

So, if the tool details palette bugs out when the mesh isn't closed, press Ctrl+A right there to select all mesh, press Ctrl+C to copy the mesh, and then with ✖! end mesh edit mode!!

The mesh will be reset, but the mesh you worked hard to create is copied with Ctrl+C. Immediately return to mesh edit mode again, delete the reset mesh, and press Ctrl+V. Then, even unclosed mesh can be pasted!

The important thing is Ctrl+A. No matter what tool you were using when the tool details palette bugged out, if you press Ctrl+A you can unconditionally select all mesh.

https://drive.google.com/file/d/11QdbVnXy9JreOzB5296dLSAoXYzHNrPB/view?usp=sharing

------

That was the "Rescue method when mesh edit mode bugs out midway"! Please try it✨

See you next time!

Files

Comments

No comments found for this post.