Home Creators Posts Import Register Favorites Logout

Videos

  • 1.mp4
  • 2.mp4
  • 3.mp4
  • 4.mp4
  • 5.mp4
  • 6.mp4
  • 7.mp4
  • 8.mp4
  • 9.mp4
  • 10.mp4
  • 11.mp4
  • 12.mp4
  • 13.mp4
  • 14.mp4
  • 15.mp4
  • 16.mp4
  • 17.mp4
  • 18.mp4
  • 19.mp4
  • 20.mp4
  • 21.mp4
  • 22.mp4
  • 23.mp4
  • 24.mp4

Downloads

Content

Hello everyone, this is Himono.

Let's continue with the beginner tutorial this time too!!

Previous article is here

<Table of Contents>

[Optional] Creating →Eye Facial Expression Changes

[Optional] Creating Upper Eyelid → (About Blend Shape Weight Restriction Settings)

[Optional] Creating Lower Eyelid →

[Optional] Creating and Adding White Eye Boundary Parts ① (About Loading Additional Parts)

[Optional] Creating and Adding White Eye Boundary Parts ② (About Glue)

[Optional] Creating Physics Calculations for Upper Eyelid →

[Optional] Creating Physics Calculations for Smile Eye Shape

※You can easily jump to the relevant section by inputting the table of contents above with Ctrl+F (or command+F)

------------------------------------------------------------------------------------------------------------------

[Optional] Creating →Eye Facial Expression Changes

What the heck are facial expression changes! you might think. This is a very advanced technique that subtly changes the outer and inner corners of the eyes in accordance with mouth corner and eyebrow movements to emphasize facial expression changes even more. Probably almost no beginners are doing this.

↑The finished version looks like this. The cheek and eyelid movements are emphasized more!

Link the already existing "Eyelash → Curve" to "★Smile Eye Shape" and deform it. This movement alone looks a bit strange, but when combined with the upper and lower eyelid movements we'll create later, it becomes really cute.

------------------------------------------------------------------------------------------------------------------

[Optional] Creating Upper Eyelid → (About Limit settings for Blend Shape Weights )

Next is super difficult!!

We'll create upper eyelid-only movement like this, but as you can see, since we're moving the art mesh directly, the movement shifts very easily...

As a countermeasure, I think it's better to move everything at once with the deform brush while selecting multiple items. The target objects are as follows:

Highlight Flower → Eye Blink (※Only this one is a deformer.) Small Eyelash → Large Eyelash → Outer Corner Eyelash→Sclera Shadow → Addition 50% Iris Reflection → Addition 60% Iris Highlight 1 → Sclera → Double Eyelid → Cheek →

Of these, Highlight Flower → Eye Blink will look better if moved later.Select everything except Highlight Flower →Eye Blink and move with the deform brush.

This movement isn't complete yet.Try moving the movement we just made when 〇Left Eye Open/Close is at 0.0.

Gyaaaaaaaaaaaaaah!! It broke.

As explained in the article↓, blend shapes are a feature that can "automatically combine deformations."

https://www.patreon.com/posts/138248155

Automatic means "the created movement is combined regardless of whether the eye is open or closed." So, a separate process is needed for "reflect upper eyelid movement when eyes are open, but don't reflect it when eyes are closed."

Yes, the amazing thing about blend shapes is they can do that processing too! Use this! "Limit settings for Blend Shape Weights"!

With all the objects linked to "★Upper Eyelid →" selected, choose this "Limit Settings for Blend Shape Weights."

※You can select all immediately with the following method. This is a review from a past article! ① Right-click anywhere on the "★Upper Eyelid →" parameter bar② Hover the cursor over the rightmost "▽" in the menu that appears on the right③ Click "Select"

When you click Limit Settings for Blend Shape Weights, a separate tab like this appears. It's confusing at first glance.

Let's go through it one by one. First, the pull-down at the top left is where you select the parameter to "restrict." This time we want to restrict ★Upper Eyelid →, so select this.

Next, the pull-down right below it. This is where you select the "reference parameter for the restriction." If you want to process "reflect upper eyelid movement when eyes are open, but don't reflect it when eyes are closed," the reference for restriction is the blinking movement, meaning "〇Left Eye Open/Close."So select "〇Left Eye Open/Close" here and press the "Add" button next to it.

Then a straight line graph appears on the right. We'll use this graph to set the restrictions.

By default it's a straight line, but various graphs exist in the "Weight Limit Graph" presets.

This time we'll select "Line 2"!

We'll further fine-tune the graph from here. Click "Edit Graph" at the bottom right, change the parameter value 1.0 to 0.7, and press OK.

If the graph looks like this, OK!

Now, with just this explanation, you're probably completely confused about what we set with the graph. If we convert this graph to text, weight limit at 100% = "state where blend shape movement is reflected without restriction."Conversely, 0% = "state where it doesn't move at all."Also, parameter value = "the value of the reference parameter."

So with this graph, we're setting "when 〇Left Eye Open/Close is at 0.7, blend shape movement is reflected without restriction, but when 〇Left Eye Open/Close is at 0.0, it doesn't move at all"!

Why did we make the 100% parameter value such an odd number like 0.7?

↑Because 〇Left Eye Open/Close starts blinking from 0.7!

Did you understand the principle? Anyway, just remember "set the restriction to 0% at the reference parameter value where you don't want it to move"!

Once the settings are done, you can close this tab by pressing the × in the upper right.

In this state, let's move ★Upper Eyelid →.

As you can see, the breakdown has completely disappeared!!!!

Blend shapes are truly amazing. Like this, you can easily combine complex facial expression variations and swaying movements while also setting restrictions...

And with that, the upper eyelid is complete!

------------------------------------------------------------------------------------------------------------------

[Optional] Creating Lower Eyelid →

Next we'll create lower eyelid movement in a similar flow.

The objects to move are as follows:

Highlight Lower → Eye Blink Outer Corner Eyelash →Eyelash Lower → Tear Bag → Addition 60% Iris Highlight 1 →Sclera →Cheek → Eye Blink

As before, select everything except the "Highlight Lower → Eye Blink" deformer and move with the deform brush, then move the Highlight Lower → Eye Blink deformer to match afterward.

For the upper eyelid, I had the "Addition 50% Iris Reflection →" art mesh protrude from the iris, but when matching "Addition 60% Iris Highlight 1 →" to the lower eyelid movement, I think it looks better not to let it protrude from the iris. Fine-tune this part later to fit within the iris range.

The lower eyelid also breaks when eyes are closed if left as is, so we'll do weight limit settings. Just change the blend shape at the top left to "★Lower Eyelid →," and the rest is exactly the same method as the upper eyelid.

The lower eyelid is also complete! When combined with the upper eyelid movement, the eyelid movement freedom has increased considerably.

------------------------------------------------------------------------------------------------------------------

[Optional] Creating and Adding White Eye Boundary Parts ① (About Loading Additional Parts)

Now, we have parts we want to add, so let's return to Photoshop temporarily. This part has already been added to the PSD in the distribution article at the time of posting this article. (So if you started rigging Nyanchan after this article was posted, the migration work itself for adding parts becomes unnecessary. Since this process will appear in many places going forward, please at least read through it!)

https://www.patreon.com/posts/114937444

First, let me talk about the intent for creating the additional parts. Beginners probably don't notice or need to worry about this at all, but I was bothered by the boundary between the iris and skin when moving the eyes around.

Here, if possible, I want to draw the same boundary line as other parts of the iris to make the appearance clearer.

I want to process this so it only displays when the iris overlaps the skin boundary. Can such a thing be done!? you might think, but as you can see, it can be done with ingenuity.

The additional part needed for this is this one!

S c a r y

The appearance is quite something, but as you can see, we'll create a new line art part that goes around the white eye boundary. It's better to match the color and texture to the iris boundary as much as possible!

As for the layer order to place it, between Tear Bag → and Eye White Shadow → is desirable. It goes between "eyelash-type parts" and "iris/white eye-type parts"!

Save it once created. Everyone please download the revised PSD from the PSD distribution article. Both the pre-revision and post-revision files have the same name "Nekomaguro_import.psd," so if you don't want them mixed up! please make them easier to distinguish by changing the file name or something! (By the way, the post-revision version allows downloading both English and Japanese versions on both Fanbox and Patreon.Those who want to use the Japanese version use the JP folder, those who want the English version use the EN folder!)

Return to Live2D and drag the PSD with the Eye White boundary added to the screen you're currently working on.

When you drag it, a separate tab like this appears, so click the bottom one and press OK.

(The name will change depending on your save name, so please select the file name you're currently working on!)

Next this screen appears. Click the bottom one here too and press OK.

(In my screenshot it says "Nekomaguro_import2.psd," but on your screen it should say "Nekomaguro_import.psd.")

Then! A folder called "Nekomaguro_import.psd (Corresponding layer not found)" is created at the top of the parts palette, and the added parts are all added together there. Actually, besides Eye White Boundary → I've also quietly added skirt lining and tail, so those should also be dumped into the folder together.

First, we need to place the parts that were added to the very top ignoring layer order into the correct location. In the old days, this rearrangement was quite difficult, but now it's super easy.

First, right-click the part you want to move (this time "Eye White Boundary →") and select "Select for Movement."

Next, select the part one below where you want to move it (this time, since we want to place it between Tear Bag → and Sclera Shadow →, select "Sclera Shadow →") and click "Move Here."

By default, a dialog like "Move here" should appear, so press OK.

Then, Eye white boundary → should be successfully added one above Tear Bag →!

The other added parts won't be touched until much later, but let's move them just in case.

"Skirt White 1_2" → One above "Skirt Green Drop Shadow 2"

"Skirt White 2_2" → One above "Skirt Green Drop Shadow 3"

"Skirt White 3_2" → One above "Skirt Green Drop Shadow 4"

"Tail → (※Only for this one, select the entire folder "select for movement") → One above "Back Hair"

When you select "Back Hair" and press "Move Here," it goes inside the "Back Hair" folder, so you need to move it one level up afterward.

You can delete the now-empty "Nekomaguro_import.psd (Corresponding layer not found )"!

The migration of additional parts is now complete!

----------------------------------------------------------------------------------------------------------

[Optional] Creating and Adding White Eye Boundary Parts ② (About Glue)

Here another important feature appears, so I'm separating the section.

That's Glue!!

If you click the "Sclera Border →"(Eye white border →) art mesh in the distributed cmo3 data, you should see unfamiliar red dots and a yellow mark like this. This is the mark of art mesh using Glue.

Glue is, simply put, "adhesive." You can stick different art meshes together and make them move exactly the same, or mix movements.

This time we'll use the "make them move exactly the same" function! Look. The Sclera Border → art mesh is moving even though we haven't placed a key on "〇Left Eye Open/Close."

By gluing it to Sclera →, it moves exactly the same as Sclera →, eliminating the need to create Sclera Border → movement from scratch.

Let's look at how to glue! First, to use Glue, the mesh of the part you want to use must be exactly the same shape (※There are some exceptions but let's ignore them for now). This time we want it to move exactly the same as Sclera →, so we need to make it exactly the same mesh as Sclera →.

So, copy Sclera →'s mesh with Ctrl+C and paste it to Sclera Border →!

※If you don't know how! please check the "~Bonus: Rescue method when mesh edit mode bugs out midway~" section of the article↓!https://www.patreon.com/posts/141862856

Once you've pasted the mesh, select both Sclera → and Sclera Border → in multiple selection. At this time, be sure to select Sclera Border → first. In this order↓

In that state, enter Manual Mesh Edit mode again, select the entire mesh with the lasso tool or similar, and click the "Bind" button.

Amazingly, the gluing process itself is done with just this. Too easy~!

When connected, the mesh color changes and a yellow mark appears as before. Click this yellow mark!

Then the mesh part turns yellow, and a circle like the deform brush should appear around the cursor.

In this state, drag the mesh part over and over while holding the Shift key. Then it changes from yellow → green!

In this state, try moving the 〇Left Eye Open/Close parameter, and if it goes well, the boundary should move along with the white eye!

If the white eye stops moving like this, the multiple selection order is different from my explanation.

When you select Sclera →, if the color is yellow the order matches, and if it's red it's different.

I think you dragged with the brush earlier to change the color, but that's called "Adjustment of Glue Weight," and you can change "which art mesh's movement to prioritize." Earlier we dragged while holding the Shift key, but if you drag without holding Shift, it becomes red.

Yellow → state where both art meshes' movements are in equilibrium. Green → state where the movement of the art mesh with yellow vertices is prioritized 100%. Red → state where the movement of the art mesh with red vertices is prioritized 100%.

For some reason the vertex color of the art mesh and the weight setting color are misaligned so it's confusing, but according to the above rules, if Sclera →'s vertices are red but you make them green in the weight settings, the movement of Sclera Border → art mesh with no movement becomes prioritized 100%, resulting in Sclera → itself not moving...

So, if Sclera → has red vertices due to selection order, either drag without holding the Shift key to make it red, or delete the Glue once and redo the multiple selection starting with Sclera Border → to solve it.

Glue disappears when you delete this object that appeared in the parts palette!This itself becomes the Glue. Like deformers, Glue exists as an object in Live2D.

※If this object doesn't exist, click the yellow mark on the screen. It will appear.

Once Sclera Border → moves well, then enter the Iris → ID in the clipping field of Sclera Border →! (By default it should be named something like ArtMesh○○. I changed it to EyeL for clarity.)

By doing this, Sclera Border→ will only display within the iris range. It moves the same as Sclera → and only displays within the iris range, becoming line art that clarifies the boundary when the iris moves around, completing the process!

This isn't a technique I devised but an advanced method that other creators have been incorporating for a while.I think it will have an even bigger effect especially for "art styles without lower eyelashes." Please use it as reference!

------------------------------------------------------------------------------------------------------------------

[Optional] Creating Physics Calculations for Upper Eyelid → and Lower Eyelid →

All that's left is physics calculation settings!

Since we've explained physics calculation mechanics extensively in the articles from two and three issues ago, this time we can probably get by with simple number sharing!So I'll explain both upper and lower eyelids at once.

First let's create the →Upper Eyelid physics calculation group! If you forgot how to make it, please read the article from two issues ago! (※The arrow position changes depending on parameters, objects, and physics calculation groups, but I simply failed to unify them💦 If it bothers you, aligning them like beginning or end of text might make it easier to see!)

https://www.patreon.com/posts/146985988

The settings are as follows. Only put "〇Eye Size" in the input settings. Don't check Reflect. Also, like the "→Pupil 1" physics calculation group, make the Input Normalization values biased so the maximum value is larger. (-60~90)

Fine-tune the output settings' Magnification with "Decrease Output."

Next are the →Lower Eyelid settings. The input settings values are slightly different here.

Add "〇Smile Eye Shape." Effectiveness is 60

Normalization of input and Physics Model Settings are the same as →Upper Eyelid

Output settings are also the same as →Upper Eyelid.

Once this is done, try moving "〇Eye Size"!

Wowww!! She's surprised!! So cute!!!! And she also makes a skeptical look!! Very expressive!!

-----------------------------------------------------------------------------------------------------------------

[Optional] Creating Physics Calculations for Smile Eye Shape

This is the last section of this article. Set it up as follows. To be honest, it's exactly the same settings as →Lower Eyelid so duplicating makes it easy. (Why separate them then? Because later I plan to add input parameters to →Lower Eyelid to also link it with mouth movements.)

In this state, let's move 〇Smile Eye Shape!

She's smiling and getting angry!! So cuuuute!!

With this, we've caught up with all the processes in the distribution file↓. August distribution. Isn't that taking too long???????? There are probably tens of thousands of characters just in the physics calculation explanations...

https://www.patreon.com/posts/136074018

Now, pulling myself together, after this I plan to proceed with "Creating the other eye (copy-paste time-saving method)" → "Creating the mouth." It's still progressing slowly as always, but thank you for your continued support! See you!!

Files

Comments

No comments found for this post.