[High-Quality Live2D Tutorial for Beginners] Rigging the Mouth ①-2 (Patreon)
Videos
-
25.mp4 -
26.mp4 -
27.mp4 -
28.mp4 -
29.mp4 -
30.mp4 -
31.mp4 -
32.mp4 -
33.mp4 -
34.mp4 -
35.mp4 -
36.mp4 -
37.mp4 -
38.mp4 -
39.mp4 -
40.mp4 -
42.mp4
Downloads
Content
<Table of Contents>
[Required] Creating the closed mouth (About the Lock feature)
[Optional] Method for making mouth deformation bilaterally symmetrical (& About Guides)
※You can easily jump to the relevant section by inputting the table of contents above with Ctrl+F (or command+F)
[Required] Creating the closed mouth (About the Lock feature)
Now let's finally deform the mouth!! We'll use the "Closed Mouth Guide" we displayed at the beginning as a guide, true to its name.Display the Closed Mouth Guide and lower its opacity to around 50.
Then, to avoid accidentally selecting it, click next to the eye mark to display the 🔒 mark and lock it! This makes the art mesh unselectable.Apparently this was actually the first introduction of this feature here lol
First, let's deform the upper lip to match the closed mouth guide! With the upper lip selected, place 2 point keys on "〇Mouth Open/Close."
Draw the Deform Path edit on the upper lip.
I think it'll look good if you place 5 control points along the curve like in the video!
If you forgot about the Deform Path edit, check the following article!
https://www.patreon.com/Himonovtuber/posts/high-quality-for-126718621
And importantly, set the 〇Mouth Open/Close parameter to 0.0.People often accidentally deform while it's still at 1.0, but 1.0 is when open, 0.0 is when closed, so make sure not to mix this up!!!
Lower the entire upper lip to match the guide, and fine-tune by moving the Desform Path edit. I think it'll be easier to see the guide if you temporarily hide the lower lip, inner mouth shadow, and inner mouth around here lol
Since it's just fine-tuning, I think the upper lip is super easy! The problem is the lower lip!
The Deform Path edit looks like this (sorry it's hard to see)
And we'll shrink this significantly.
If you forcibly move it, the mesh tends to collapse↓
I think it's good to skillfully use the following features:
Multiple selection of control points (holding Shift while pressing control points allows multi-select & move & scale)
↓Also explained in the article below.
https://www.patreon.com/Himonovtuber/posts/high-quality-for-126718621
Releasing the transform box? (official name unknown)
With the red frame border remaining, it's hard to move the center point, so press the × button at the bottom right to remove it. If you want to display it again, just reselect the part!
↓It seems this was briefly introduced in the article below.
https://www.patreon.com/Himonovtuber/posts/high-quality-for-148340797
This completes the closed mouth deformation!
Wow, Nyanchan's mouth moved!! So happy!!
And what's amazing is from here. Try displaying the inner mouth parts.
It deforms automatically to match the lips!!!!!
This is what's amazing about Glue. Glue is truly amazing!All the hard work of gluing them together up to this point pays off here. No matter what strange mouth shape you create going forward, the inner mouth parts will automatically follow along. The best!!
[Optional] Method for making mouth deformation bilaterally symmetrical (& About Guides)
If you want to pack in all sorts of perfect sync into the mouth going forward, you might want to do this.The deformation up to this point was done roughly following the guide, so strictly speaking, it's not bilaterally symmetrical.
↑Can you see it looks symmetrical but is subtly off?
I'll teach you the method to make this bilaterally symmetrical! I'll skip this step entirely for future mouth deformations, but it's a step that improves quality when done, so if you have the time, please give it a try!
First, as a prerequisite, everything I've repeatedly emphasized so far:
Canvas center and model center are aligned
Parts are bilaterally symmetrical
Mesh is bilaterally symmetrical
This bilateral symmetry technique can only be used once all these conditions are met.So, as persistent as I've been about this, if you have the time, please make everything bilaterally symmetrical!! Build it in the canvas center!!!!!
Now, the actual method.First, create a normal parameter (Blend Shape NOT OK) with minimum -1, maximum 1, default 0, anything works.This time, I think it's easy to right-click "〇Mouth Deformation" → duplicate parameter to create "〇Mouth Deformation 2."
Then, multi-select the "Upper Lip" and "Lower Lip" we just deformed, place 3 point keys on "〇Mouth Deformation 2," and paste "〇Mouth Open/Close at 1.0 = open mouth" onto "the 0.0 value of 〇Mouth Deformation 2."I think this is hard to understand from text alone, so please watch the video below↓.
If moving "〇Mouth Deformation 2" results in movement like "-1 is mouth closed, 0 is mouth open, +1 is mouth closed," it's a success.
Then, set "〇Mouth Open/Close" to 0.0 and "〇Mouth Deformation 2" to -1 or +1. Make the mouth closed!
In this state, from the menu on the right of the parameter palette, select "Motion Mirroring" → "Flip Horizontally" → "Use Center of Canvas" → "OK."Then, as you can see, the mouth mesh position at the value opposite to where you set the "〇Mouth Deformation 2" cursor flips left-right. Looking at this, you can really see how subtly misaligned it was!
For the following steps, it's easier if you display the guide so you can see the center clearly.
(※I honestly thought the grid would also draw a line exactly in the center, but I was shocked to find it misaligned)
(Also I realized I've never properly explained the grid, which was also shocking. This is about this button (red circle). Pressing it brings up a grid pattern that serves as a guide... but if the center is misaligned, I feel like where it's usable becomes extremely limited... I'll report back if I find out whether this is just this time or always😥)
Back to the topic.Then next, return the cursor to the side you originally set it to, select the left half of the mesh, and copy with Ctrl+Shift+C.Move the cursor to the opposite side and paste with Ctrl+Shift+V!Then how amazing!! The mesh becomes completely bilaterally symmetrical!!!
(※I think this is really hard to see, but the left and right mesh positions are now exactly the same like this.)
Once pasted successfully, be sure to delete the "〇Mouth Deformation 2" key while keeping that exact state and value. Whatever you do, don't reset the value to 0 or press Ctrl+1 to return to the default value!!!!! Please be careful!!
Probably, even after doing this step, just the vertex exactly in the center of the upper and lower lips will still be slightly off-center.
For times like this, let's use "Snap Moving Vertex to Guide"!! As you can see, the vertex automatically gets pulled to the guide drawn in the center and becomes perfectly centered!! Amazing!!
Ah, this is stupidly hard to work with if left ON all the time, so please turn it OFF once you're done using it lol I think it's fine to keep the guide OFF normally too.You can toggle display/hide from here↓!
That's all for today's article!
Next time I'd like to work on mouth deformation and width~🫶The mouth I re-updated in today's article is additionally distributed in the original article below, so please check it out!!!
https://www.patreon.com/Himonovtuber/posts/cmo3-learning-159449308
See you again!!