【Live2D Explained】 Extra Big News! There has been a revolution in hand-tracking production.#3 (Patreon)
Content
*This article is a translation of an article I published on Pixiv Fanbox on April 29, 2023.
About deformer structures
I really wanted to explain the upper arm and forearm together,
The article has become too long, so I will explain the forearms next time!
So, this is what the conventional deformer structure of the upper arm looks like.
The red marker is the rotation deformer for angle control
The blue marker is the warp deformer for length change.
And with the new version, it changes as shown below.
The red markers are rotation deformers for angle control.
The blue markers are warp deformers for length changes
The purple markers are the angle warp deformers associated with the blendshape.
(There are other areas where the structure differs slightly, but these will not be covered in this article as they would distract from the purpose of this article.)
Let's look at how each of the red, blue and purple deformers are deformed.
First, the blue is... the length change deformer.
This is almost the same as before the improvements.
This deformer only changes the length of the arm.
Fine-tuning is necessary due to structural changes, but if you have already made the movement before the change, you can almost just divert it.
Next the red is ... rotation deformer for angle control.
This one, we don't put any movement on it at all.
We just put it down.
The meaning of this rotation deformer is.
'to keep the shape of the object's contents unchanged', that's all.
↑the moment when the large number of dots that I worked so hard on became unnecessary...(´;ω;`).
(I am really, really sorry if there are people who imitated me in making this::
I didn't think it would be this easy either...!)
Finally, the purple... warp deformer for the angles that are connected to the blendshape.
This is the key deformer for this method.
The shape is a square and the Number of conversion divisions should be 2 x 2.
Any number of conversion divisions can be used, but 2 x 2 is easier to see.
This also does not hit a dot on the shoulder XY.
We will dot the two new blendshape parameters.
The first blendshape should be named "Shoulder angle correction X".
The range should be minimum 0, default 1 and maximum 1.
Why "default 1", because,
(1) Default is 1... i.e. "Blendshape is on by default".
(2) In the weight settings, the affect of the blendshape is set to 0% except for specific parameter movements. (e.g. 'when the smile parameter is set to 1')
(3) Then, even if there is no "special action such as a key press", the parameters of the blendshape can only be affected when the movement of a specific parameter occurs.
For example, if you create a troubled eyebrow and set the affect to 0% when the smile parameter is set to anything other than 1 (i.e. 0), you can make the eyebrows troubled only when the eyes are smiling.
The reason for this is because I want to use the method that....
This technique of "setting the default to 1, and controlling the affect by weight settings, so that the parameters of the blendshape only move when specific parameters move" can be used in all kinds of situations, not just in an arm like this one, so it's worth remembering.
After creating the blendshape, adjust the default position so that the warp deformer and the arms of the content are at an angle ←45°, as shown above.
*Why such a halfway position is needed is explained later.
The way to rotate a warp deformer neatly to 45° is to hold down the Shift key and rotate it in 45° increments!
Next, hit a point on the shoulder angle correction X-parameter you just created,
Rotate the shoulder angle correction X-parameter so that it is diagonal → 45° when the X-parameter is 1.0.
It is also good to rotate this one while holding down the shift key!
The connection to the shoulder may go wrong, but that will be fine-tuned later.
Next, the weights for the 'Shoulder Angle Correction X' parameter are controlled.
With the angle correction warp deformer selected, select 'Limit Settings for Blend Shape Weights'.
The graph settings will then appear like this,
Select '← Shoulder X' from 'Parameters' and click 'Add'.
Select the preset "Line 2" for the weight limit graph.
Then the movement of the shoulder X will look like this.
When the shoulder X is -10, the weight of the blendshape is 0%, which is the default state.
When the shoulder X is 10, the weight of the blendshape is 100%, which is shown in the image below.
I made a limit graph with a straight line between them…
so it automatically makes the movement between them!
This finishes the explanation of the X movement.
Once you have done this, set the value of "Shoulder angle correction X" to OFF... i.e. 0, in order to prevent unintended problems.
After doing so, we now create a second blendshape parameter called 'Shoulder Angle Correction Y'. The range is the same as above - minimum 0, default 1, maximum 1 - and when the Shoulder Angle Correction Y is 1.0, it rotates downward at an angle of 45°.
Then, open Limit Settings for Blend Shape Weights and create a graph, as shown in the image below.
Now the graph is in the reverse direction of the previous graph.
The parameter is ← Shoulder Y and the preset is Line 3.
(Incidentally, when two or more blendshapes are connected to a single object, as in this case, you can switch between the blendshapes from the red circle).
Then, when the shoulder Y is moved, the movement looks like this!
When the shoulder Y is 10, the blendshape weight is 0%, so the default state is as shown in the image below.
When the shoulder Y is -10, the blendshape weight is 100, so the state is ↓.
As explained above, it automatically complements the in-between movements.
So that's it for basic angle making of the upper arm.
Try moving it with both 'Shoulder angle correction X' and 'Shoulder angle correction X' set to 1.
What a surprise...
It's working beautifully.
(*I think the shoulder connection is probably rough if you made a new one...
Please have a little more patience...!)
After setting the blendshape just twice,
it was the same as when I was dotting so frantically... no,
Even more beautiful movement than that was possible.
The inventor of this method, Temikeru-san, is a genius...
I've tried to explain it in as simple a way as possible, so some of you may already understand how to do it, but for those of you who are thinking, "What's this magic?" I'm going to explain why this happens in more detail.
I will explain it to you, so you can be intoxicated by this lean and too beautiful technique.
First, only the three movements above were set this time.
① is the default position when both blendshapes are off.
The reason why I set the default angle halfway in the beginning is because the way this graph is made, the weight of the blendshape is 0 at shoulder X-10 and shoulder Y10... in other words, it is the "default position".
②is the movement when the weight of "Shoulder angle correction X" is 100.
③ is the movement when the weight of "shoulder angle correction Y" is 100.
Now, if shoulder X10 and shoulder Y10 are ④, what movement would ④be?
Comparing (1) and (3), the angle changes 90° downwards.
④has a weight of 100 for both 'shoulder angle correction X' and 'shoulder angle correction Y',
i.e. the movement is a combination of ② and ③.
So, rotating ②90° downwards will result in the following.
The blendshapes complement the movements in between, so they are perfect.
And the biggest problem is shoulder X0, elbow X0 ( ⑤),
but the moment it reaches ⑤,
the aforementioned "deformer distorts" method causes the warp deformer for angle correction to become nothing and the angle is switched in an instant.
Do you understand how the structure works?
Finally, we will slightly deform the first 'length change deformer' to fine-tune the connection with the shoulder. Thanks to the simplification, you should only need 9 adjustment points (3 x 3).
In the same way, the line drawing art mesh is fine-tuned to 9 points of 3 x 3 and excess line drawing is erased.
The shadows of the armpits, etc. can be created using exactly the same methods as before the improvements, so I will not explain them.
The upper arm is now complete!
The explanation is long as hell, but I think the actual man-hours are less than a tear away. Once again, I would like to express my great appreciation to Temikeru for sharing this revolutionary technique with us!
Temikeru-san is now distributing sample data using this technique free of charge.
↓↓↓
https://twitter.com/temikerurero/status/1652281582777159681?s=46&t=Tv74DG_u8zVyf0fhqoWktA
If you have read this article but didn't fully understand it, or if you understand it but don't want to make it out of the blue, we would like you to download and actually try it out!
The next article will explain the simplification of the forearm.
It's almost exactly the same way of making them as this time, but you'll need to be a little more creative.
Still, it's a lot easier, so please look forward to it!
See you then!