The printer gets a new Name! (Patreon)
Content
Those who have followed the development of the printer from day one know that the name THE 100 was born from the vision of building a 3D printer that could withstand an acceleration of 100,000 mm/s2.
In the past, many people in the community have shown us that it's even more capable of printing at accelerations of 160k-220k. But they also found that the ability to dissipate energy gets worse at that acceleration. There's a limit to any design, and for V1.1 it's around 130-150k where the printer starts to jump.
For V2 I rebuilt the frame from scratch and simulated the forces it would have to withstand. For the simulation I assumed that it would have to withstand the forces of moving a 450g print head at an acceleration of 250,000mm/s2 at a speed of 1000mm/s.
As a result, I learned that a frame capable of withstanding these forces would have 60% more mass and therefore require about 60% more filament to print. I did a bit of generative optimisation to see which parts could be hollowed out. That's one of the reasons I decided to integrate the cable tunnels into the frame.
This made the printer design process a bit tricky as the orientation of the parts when printing is important, but since almost all modern slicers support tree supports, I got to a point where I could print all the parts in the optimal orientation without needing too many supports.
I cannot say for sure how much filament is needed to print the whole printer in maximum configuration, not yet, but I expect it would take 5-6kg of PLA, maybe a bit more.
I am also not sure that we all need a design that aims for 250k speed. Most of us want a printer that prints decently at 50-60k, and for that the smaller frame of V1.1 is more than enough.
So I decided to make some changes to the project around the printer(s). The brand of the project remains. Today 'THE 100' is a brand in the printing community that stands for crazy fast printing and it will stay that way. But I have decided to rename the printers themselves, based on the acceleration goal.
V1.1 will remain under the new name of T100, as it's targeting 100k speed, and V2 will be released under the name of T250, as it's targeting around 250k speed. I plan to update and support both versions in the future.
This also means that the terms "Standard Edition" and "High Speed Edition" will become obsolete. In the future, the T100 will be what the Standard Edition was before. A reasonable, insanely fast 3D printer at a very low price.
The T250 will be the new High Speed Edition. Here the price point is still important, but because the goals are higher, it's also necessary to use higher quality parts to achieve those goals, which also have a higher price tag.
In terms of pricing, I expect this future T100 to stay around $350, maybe $400, as the war and inflation have had an impact on prices.
The T250 will be priced between $650-900 depending on the final parts that make the cut for the BOM.
In terms of speed we expect that the average T100 builder will be able to print a speedboat in around 5-6min (here we have reliable numbers based on serial number requests).
For the T250 I expect that the average T250 builder will be able to print a speedboat in around 3-4min and the enthusiast should be able to get a speedboat time in around 2min maybe less, depending on the time and effort he/she wants to put into this hobby.
That was a long monologue, please give me feedback in the comments if you like such behind the scenes thoughts here on Patreon and also feedback about the naming changes and the price tags.