Finally.. .the new Toolhead is ready for testing (Patreon)
Downloads
Missing 1 file, as this post has not yet been imported.
Content
Today I printed the last part of my T250: the tool head. Look at this beauty. It's hard to describe, but compared to all the other toolheads I've made/installed in my printers, this one is tiny but uncompromising. We have CPAP remote cooling so no part cooling fans, we have an integrated motor in the carriage driving my own direct drive extruder and in this configuration we have a Rapido UHF. I am happy!
But lets talk about the facts:

The tool head weighs just under 300g, I would guess 250-260g, in the picture the cpap tube and the cable harnesses push the weight of the toolhead up a bit.
There is still a bit more to optimise for the future, I could save about 4-5g weight in the carriage, 22g could be saved by removing the hotend fan & fan duct, Volgger showed the concept of cooling the hotend with the airflow of the part cooling, which I would like to implement in the future.
FUSHI and I are also working on bearings with a plastic housing, which would also reduce the weight of the toolhead by ~20g.
The weight of the gantryis just over 200g, which is fine. I am not completely satisfied as the XY joiner feels too rigid. My gut feeling is that another 10-15g is possible without losing structural stability. Once the printer is released, I'll do some simulations to find a more optimised shape, but for now it's good enough.
Here it is! A direct drive extruder with bed levelling sensor for under 500g. For comparison the gantry of a Bambi weighs about 250g more ;-)