Home Creators Posts Import Register Favorites Logout
haven't archived this post yet. have a subscription? use the importer!

Downloads

  • The 100 v1.1-beta1.step

Missing 1 full-res photo, 1 file, as this post has not yet been imported.

Content

Dear Patreons,

after 3 months of development, I got to the point where I think that the design is stable enough for a larger group of people. Every part was tested and will be tested even further since it's part of my current daily driver I use for prototyping.

Changelog:
- New Toolhead: The toolhead was redevelop from scratch. Compared to v1.0 it's able to push about 65% more air at the critical point directly under the nozzle.
- New Feet: The new feet are able to absorb 25%-30% more force before the frame starts shaking
- Removed Rods from the back of the printer: This removed 2 linear rods from the BOM reducing the price of the printer by another 7-10$
- Clearance fix for Toolhead: The toolhead is now able to move 5-6mm more in the X-Axis
- Added allen wrench holes for X/Y-Motors
- Added Nut-Inserts to the Mainboard Mount
- Added Clamp to fix Power Cord
- Made LM8UU Exchangable
- Added Quickmounts for Z-Rods
- Bugfix: Power Supply Holder
- Added cable guides for proper cable management


Also many i've done research on the parts i've used in my v1.0 build and compared them to similar priced and even more priced parts. This will lead to a dual way BOM for the final release in August. There will be a cheap build that will be focused on 400$ (yes it will have a higher price since the war and the resulting inflation raised the prices by about 15-25%) and a "high speed" edition that will be focused somewhere around 550-700$ but here I have still a lot of research to do to find a good package.


Also i've decided to release in August a BOM with Aliexpress links, so if you plan to build the final version of the printer I would suggest to buy the parts before that official release since Im pretty sure that the prices will get a lot higher when the hype around the release started.

I will keep you informed on my work on the BOM here on Patreon but it will take me about 6-8 weeks to finish my testing of all parts (Rods testing is done by now, next step will be linear bearings, followed by different motors)



Files

Previews only

Comments

kaifas

are you planning on releasing extracted stls?

Harish Rajan

Hi, I am planning to build a THE100. Parts sourcing will take 1-2 months. I plan to start printing all the printed components. Should I start with v1 or wait for v1.1 ?

Abhishek Saikia

Please let us know what changed between the v1.1 beta1 and subsequent versions (including the final v1.1 release) so that we can only print those parts again if needed as I have already started printing all the beta1 parts

The100

The idea is a bit different, from my side v1.1 is finished. I focus on all the parts that are needed for the release like an updated BOM, updated Slicer profiles and an updated introduction video. The goal of the beta is that all of my patreon's act as beta testers and give me feedback on problems that occurred while building that version of the printer so that I could decide if the bugs will be fixed for 1.1 final. Currently I have no open bugs that needs to be addressed before v1.1 release.

Abhishek Saikia

Oh, that's great! That means hopefully, I don't have to reprint any of the parts. Thanks for the update.

SeaDog

Hi, can somebody walk me through how to make stls of the various parts? I load the step into freecad but the tree disappears leaving only the complete printer. I load the step into Prusa slicer but the bed, at least, shows as only one part when it is obviously three. Sorry, I'm a bit of a noob in cad. Thx.

The100

The easiest way would be to import the STEP file into fusion360 or shapr3d and export them as STL

SeaDog

Thank you. Fusion360 did the trick. Within five minutes I was exporting individual parts directly to my slicer. Cheers.

Thomas Albrecht

Hi, I'm currently printing/building this beta version and I've noticed a couple of things: CHC Pro Mount - The air cutout on the left and right side is not rectangular. This will probably lead to a print fail if you print this without supports, since bridges will end in mid-air. - There is a small upwards bulge on the lower end where the cooling fins of the hotend touch the mount that doesn't seem to have any purpose. Toolhead - The Adapter Plate is missing from the STEP file. I've used the 1.0 version instead. Bottom Frame - The cut between the front and back parts is in a slightly different location on the left and right side. Just cosmetic, no functional impact as the corresponding part is shorter/longer respectively. Images of these issues are here: https://drive.google.com/drive/folders/101yiYXuPAkXuqXMjdZTEF5931CZGlVdh?usp=sharing Keep up the good work, I'm very much enjoying this build so far.