Home Creators Posts Import Register Favorites Logout
haven't archived this post yet. have a subscription? use the importer!

Content

In the last 4 weeks i've tested OrcaSlicer with my Voron 2.4 350mm printer and I decided to migrate my Cura profiles for THE100 to OrcaSlicer.

OrcaSlicer has a couple of features that are really nice for fast printing:

- You can define square_corner_velocity by line type. For example you print outer lines with 8mm sqv and infill with 40mm. This increases the infill speed at 300mm/s by 22%

- You can define distinguish between outer lines and top layer lines for the first layer. This means you could print the outlines with 40mm/s to make sure that you got a good layer adhesion and the infill with 100-120mm which is okay since the printer connects this lines to the outlines

- You can configure most of the klipper parameters like sqv, pa, smooth time in the slicer. Which means you can use different values for different filaments.

In summary I had a good time and therefore I will support it in the future!

Files

Previews only

Comments

Volker Holzmann

Sounds great, also changing from Prusa Slicer to Orca. Is there any Update regardig a Orca profile?

The100

Currently im working with Orca Slicer, still learning a lot new things. As soon as I have something that is more or less stable I will share it with my Patreons

Chris Peach

Would be great to test out the profile!

Mike

Where to find these profiles? Or are they still in developing?