Early Release: Flapjack Octopus!! (Patreon)

***THIS FILE IS NO LONGER INCLUDED FREE WITH SUBSCRIPTION.Use the 50% OFF discount code if you want to purchase it.

Hi All!

Introducing my Flapjack Octopus design!  The Flapjack Octopus is an adorable species of Umbrella Octopus, and close relative to the Dumbo Octopus.  These cute fellas have swimming fins on their heads that look just like a set of ears.  Unlike many other octopus species, the Flapjack only has one row of suckers on each tentacle. 

I hope you like it!

Check out a quick Demo Video Here!  (*I do encourage using a brim for this one, see the note below)

Cheers!Matt

Pictured Prints use the following filaments***Orange Multicolor: Cookiecad Sunrise Mixer, iSANMATE HS Coffee, Polymaker Charcoal Black, Polymaker Cotton WhiteBlue Multicolor: iSANMTATE Blue Purple, Ziro Sunlit Petal, Polymaker Charcoal Black, Polymaker Cotton WhiteIridescent Multicolor: Polymaker Starlight Aurora, Polymaker Starlight Mercury, Voxelab Burnt TitaniumOrange/Yellow gradient: Ziro Peachy SunriseRainbow: Rainbow Blaze*To Download: Click Here to go to the Pinned "the Hub - Info and Current Download Links" post3D PRINTING SETTINGS:

Flapjack Octopus: Print-in-place. No supports needed.

Multicolor 3MFs: Compatible with PrusaSlicer, Bambu Studio, Orca Slicer, etc.

10%-15% Infill.

3 Walls

*Brim recommendation: Due to the somewhat smaller bed footprint provided by the tentacle suckers, I would suggest using a brim to aid in bed adhesion.  I recommend setting the brim gap distance to a value of around 0.25mm-0.3mm which will make the brim easier to remove (you may have to enable an Advanced menu set in order to access this setting).  

This should generally scale down to about 60%-65% with full articulation, on a well calibrated printer. Your mileage may vary.

*To Download: Click Here to go to the Pinned "the Hub - Info and Current Download Links" post***Paid Links.  As an Amazon Associate I earn from qualifying purchases.