Home Creators Posts Import Register Favorites Logout

Content

Hi Everyone!

Introducing the new Subscriber Exclusive MMMini Reindeer + Santa Hat version!!

This mini is 100% print-in-place, and requires no supports.  Its a quick and easy print that scales down very well.  I've included Santa Hat and keychain options.

There are also a pre-painted 3MF for those who want to print it in multicolor! Printing the Santa Hat version is a little more complex since most people are limited by 4-slot multicolor printers, but you can easily get a 5th color to print the hat in red by performing a filament swap just after the black in the eyes finishes. There is more info on this in the PDF guide, included in the download.

Check out a little preview video HERE.

I hope you like it!
Matt

Pictured Prints use the following filaments***
(reference the numbered prints in last image of the gallery)

(1) iSanmate Latte Brown, iSanmate Beige, iSanmate Brown, Ziro Matte Black, Ziro Matte White, Polymaker Matte Red
(2) Overture Chocolate PLA+, Overture Brown PLA+, Snapmaker Matte Black, Snapmaker Matte White, Snapspeed Red
(3) Amolen Red Limestone, Ziro Wood Grain, Amolen Rainbow Rock, Ziro Matte Black, Ziro Matte White, Polymaker Matte Red
(4) Ziro Northern Lights

*To Download: Click Here to go to the Pinned "the Hub - Info and Current Download Links" post

3D Print information:

  • MMMini Reindeer:  Includes regular and several keychain versions, with and without Santa Hats 

  • Multicolor 3MF files! (For PrusaSlicer, Bambu Studio, and Orca based slicers)
    - Reindeer 4-Color
    - Reindeer 5-Color
    - Reindeer with Santa Hat 4-slot (5 colors if you swap the red in. see included PDF for more info)
    - Reindeer with Santa Hat 6-colors
    (for Orca based slicers… it's often better to use File>Import rather than Open Project, so that it doesn't import any printer specific presets/settings.) 

  • Use the slicer’s Fill Tool to mix up the colors & create new variants (demo video)!

  • No Supports

  • 10% Infill (I recommend Gyroid, Crosshatch or 3D Honeycomb)

  • 3 Walls. (Assuming 0.4mm nozzle. Adjust wall count to account for alternate nozzle sizes)

  • This should generally scale down to about 50% with full articulation, on a well calibrated printer.  However, the Antlers will be pretty fragile at that scale. Your mileage may vary.

Check out a quick Demo Video!

*To Download: Click Here to go to the Pinned "the Hub - Info and Current Download Links" post

***Paid Links.  As an Amazon Associate I earn from qualifying purchases.

Files

Comments

JB3D

Cute

GATO

I love it!

Solo3dPrintz

al i able to purschase the licky eye gecko?