Home Creators Posts Import Register Favorites Logout

Content

Yeah so I'll be honest up front: this is something between a remake and a rerun.I've been meaning to get this video out there for a while as something I keep seeing over and over again is the insistence that electric cars "need" 50A charging circuits which just isn't true. Long-time viewers of the channel already know all this, so in many ways this video isn't intended for my typical audience. But, especially since my older charging guides could use updating anyway, a stand-alone video on this topic felt useful.

https://youtu.be/W96a8svXo14

And, speaking of cars - remember how I said 2025 would be the year of the car? And that I'd definitely for sure get my hands on a car to make videos on engine management? Well... stay tuned.And, speaking of stay tuned - I've started the restoration of the CBS TV and I've filmed quite a lot. I want to put together a quick edit of what's been accomplished so far for y'all, and depending on how that goes I might have that for you in a few hours. I'm going to defer working on captions for this video until tomorrow.toodles

Files

The "standard" car charger is usually overkill - but your electrician might not know that

OK, this will be a tough one to title.

Comments

Jules and Marlaina

I was just thinking about how you’d said it would be the year of the car! Can’t wait to see what you have in store.

Slartibartfast

Adding up all the individual breakers I added to my house to support full electrification is WAY more than the 150AMP service I have (just added up to over 500!), but I really haven't seen a consistent load of over 100AMP... Yay for averaging :D

Kevin Germino

Heck ya! I have a temporary (<3 year probably) setup so I cheaped out and just put in 12/2 for 20A@240V. It makes trying to hit time of use rates mildly annoying but otherwise we’d never even notice the slower pace

Will G.

The electrician who installed my hard wired charger included an AC disconnect box. Probably unnecessary if you have easy access to your breaker box.

Walter

My garage had a dedicated 20 amp 120 volt outlet, presumably for a refrigerator or freezer. The shortcut I took was to replace the 120v breaker and receptacle with a 240v breaker and a 6-20 receptacle. My drive to work is about 80 miles and I wanted to be able to recoup that in 10 hours, and this setup is able to manage that, for the grand total of about $20. I’d like to clarify one thing. The Tesla connecter you mention at the end is the mobile connecter, which pulls the max rated based on the plug type. A wall connecter is hardwired and should be set to whatever the circuit capacity is, and will therefore pull 80% of that. Great video, from a fellow EV nerd!

Brian Deschene

I don’t know what it is like for creators like you to remake/update previous videos. I would assume that you realize your technical content is more likely to become dated than sone other types of channels. That said (to borrow your phrase :-), your audience greatly appreciates being kept up-to-date as the technology marketplace changes. So thank you for any you decide to provide even if they might be less fun to make than original subject/content.

Colin Vidar

A family friend is on me about having to get one of those wall chargers installed in my garage because the cables will heat up and cause a fire hazard if I just plug it into an outlet? Idk about that but whatever.

Brian Hirt

I dont have a garage and park in my driveway. my car charges off a 15 amp/120v standard outlet that is plugged into the outside of my house. I rarely drive more than 40 miles a day. Never had issues with the car not being fully charged in the morning. So yeah, find what works for you.

Z

Your car will not be drawing more power through an outlet than is safe for your home wiring to handle. I think you're right to ignore your family friend.

Michael Steeves

My electric furnace is heavily oversized. It has 2 x 50 amp breakers on the furnace and really only needs one of those! I ran 5' of 6AWG through the wall, hardwired to a charger. A new breaker and 75' of wire to the breaker would have been quite a bit more expensive.

Michael Cotton

Same here. The only reason I even did a dedicated 240V charging circuit is because the 120V outside the house was shared with the bathrooms inside the house.

William Wallace

A "RV outlet" is often a NEMA 14-50 in a "weatherproof" enclosure and might sound less intimidating to your electrician. PS: There also a standard adapter cable to allow plugging an AC welder into a NEMA 14-50.

Andre Pirnat VE3BIC

Please clarify: two 2-pole 50A (4 levers in total) or one 2-pole 50A (2 levers in total). And, did you disconnect half of the heating elements inside the furnace?

Michael Steeves

Two 2-pole breakers on a 100 Amp feed. 2 big heating elements in the furnace, only one ever came in. The original furnace fed domestic hot water and baseboard heat, so was heavily over sized.

William Wallace

Many towns require a service discount on hardwired equipment.

Crash Cash

My electric bike (RIP Energica) came with one of those wall-socket chargers. It didn't work, as in it would randomly overheat and shut off. It finally melted and I discovered the dealer just buys the cheapest such charger he can find. I built an OpenEVSE charger from the kit and limited it to 20A. My other electric bike has a PC power cord that plugs into the wall and gets hot enough that the plastic softens. Unfortunately, you can't get C13 connectors that will take anything better 14 gauge wire, so I just live with it. It takes 16-18 hours to charge.

Andre Pirnat VE3BIC

Hi amperage accessories like the car charge, when they are hard wired require either a disconnect box adjacent to the accessory, or the breaker panel being located in the same room. National electrical code requirement.

Andre Pirnat VE3BIC

Another fan of Hitchhiker's Guide to the Galaxy! Our electrical providers are now allowing the use of averaged peak use data over a 12 month period for sizing the panel. This is the Green Button data files in XML format. As they have finally discovered that the breaker total always exceeds 80% of the incoming line capacity, they've come to their senses and are using the billing data they collect to size the panel.

John Deters

I really liked your point about renters being told to use expensive DCFC. Renting is the only form of housing available to a growing number of people. If society is serious about transitioning to EVs, we'll need to make overnight charging available to renters too.

David Sallge

On the complexity of charging stations: There are two more features that might come in handy - depending on the situation: Number One: Having the option to remotely shutting it off. Useful if it's accessible for other people like in my driveway which is only 5 meters long and opens directly to the road (not uncommon here in Germany) Number two: Combining it with photovoltaic and have the car take excess energy instead of giving it back to the grid. For this the pv-inverter and the charging station have to communicate, because it's the charging station that has to tell the car how much it may draw. That said: you are absolutely right about the idiocy sending the folks in rented accommodation to fast charging. A nice upcoming solution: a public charger built into the curbstone. https://www.rheinmetall.com/en/products/e-mobility/charging-infrastructure/curb-stone-chargers

Killianti

I'd hold off on the EVSE guide for a little while longer. Bi-directional charging might change some of your opinions (not the important ones, just some less important ones), and that feature isn't really ready for review yet. On the subject of bi-directional charging: while not a critical feature, it does mandate a branch circuit with a much higher capacity since the current that the house might draw can be much higher than your acceptable charging speed. I'm not really sure how that works with electrical codes since that branch circuit doesn't have to add as much load to the house as its breaker suggests.

Eric Cardwell

Can you comment on the quality of Enphase vs Clipper Creek which I have and love? Do you think they can/will maintain the same level of quality and dependability?

Nicole Regan

I would LOVE to see a new ev guide.