Magic Glyph Tracing Puzzle - Resources (Patreon)
Content
Hi lovely Patreons!
Please find the Arduino code and wiring diagram to accompany the "Magic Glyph Tracing Puzzle" at the following Google Drive link:
https://drive.google.com/drive/folders/1PYz0Q4ZUqmPlpLzP_XQ7x8VtLWSu9Vwx?usp=sharing
The hardware required to build this project is thankfully pretty straightforward, as most of the functionality is built into the ESP32 itself! There are many different ESP32 boards, but the one I use is the 30-pin WROOM board, like this: https://s.click.aliexpress.com/e/_oCy6sbc
The I2S amplifier I'm using is a MAX98357, which I find is plenty loud enough when running off only 5V: https://s.click.aliexpress.com/e/_oovy7we I've then just connected the audio output from the amplifier to an old speaker which I salvaged from an arcade cabinet - you can get one from any old Hi-Fi speaker and it should work just fine.
For the LEDs, you can use any combination of WS28xx strips you want (they all use the same data signal), and cut and join them together as desired to make your network. If you like, you can always use an LED with a different controller chip, and you'll just need to change the FastLED constructor. Here's one supplier, but there are many, many others!:
For the 8 LED circular rings: https://s.click.aliexpress.com/e/_opmwHrC
And for the segment strips (I'm using 60 LED/m): https://s.click.aliexpress.com/e/_opLiPcE
This is a relatively complex project, so I only covered an overview of some of the sections of code in the video. I've tried to comment them as best I can, but please do ask if you have any questions or how you incorporate any of the features demonstrated into other projects!
Cheers.,
a.