Home Creators Posts Import Register Favorites Logout

Content

I've done lots of projects involving clocks, and quite a few using DMX. But this is the first time they've come together! It's a pretty common requirement in theatre, and in escape rooms, to have a clock that can be automated on cue to show different times, or to set the hands to point a specific direction, and DMX is the standard networking protocol used to control stage effects, so it seemed natural to use that.

I was staggered to find that this product doesn't exist already (well, actually, it does exist, but it costs $4,000! https://wahlberg.dk/products/dmx-clockwork ). Well, now you can build your own for about $25 :)

I'll be putting up a separate post for Patreons-only shortly with links to all the resources used. I hope you enjoy, and stay cool! (it's sweltering here in the UK right now...)

a.

Files

Build a DMX controlled clock for under $25

In this video I'll explain how to build your own DMX-controlled clock prop using an Arduino Mega, a RS485 transceiver module, a RAMPS shield, and a dual-shaft stepper motor. This allows you to create large clocks suitable for theatre stage effects, escape rooms, or kinetic art installations, controlled using standard standard stage control networks. More details about all of the projects featured on this channel can be found at Patreon: https://www.patreon.com/c/playfultech And you can join the discussion on the Discord: https://discord.gg/KNt3Yutf4 00:00:00 - 00:01:33 Introduction and Demonstration 00:01:34 - 00:03:02 Hardware Overview 00:03:03 - 00:03:43 Wiring 00:03:44 - 00:04:01 3D Printed Clock Hands 00:04:02 - 00:05:16 RS485 Transceiver 00:05:17 - 00:06:58 DMX Feature Mapping 00:06:59 - 00:08:53 Calibration 00:08:54 - 00:19:53 Arduino Code Listing 00:19:54 - 00:21:38 Wrapup #escaperoom #arduino #theatre #stagecraft #dmx

Comments

Kevin Leonard

OMG! Wahlberg.dk...so sad. Big theatre companies with a budget will pay this and he takes advantage of it. Love your creativity and passion as always. Cheers!

nitrous dude

How does this compare to the Wahlberg Designs implementation? Are you easily able to quickly set the hands to a predicted time (ie in a magic routine)?

Alastair Aitchison

Sure - I describe the variables you can adjust to set the max acceleration and speed of rotation at the top of the code. It should be able to manage about 400RPM without dropping steps (but that will depend on the weight of the hands you've attached to the shafts)

Scott Griffin

Thanks for this. I'm about to dive into Arduino because of this project. I know you're going to be posting it soon, but what does the XLR cable from the Arduino plug into on the other end? And what software do you use?

Marilyn Vermaas

dat is eigenlijk met heel veel in de wereld, niet?