Home Creators Posts Import Register Favorites Logout

Content

Hello lovely Patreons!

You can download the resources I used in this project from https://drive.google.com/drive/folders/19Og8FVovuFQIsOUpLGgQ13NT9SjxYV6M?usp=sharing

The main code running on the ESP32 is contained in the sketch file called arduino-rfid-PN5180.ino

I've also uploaded the PN5180-Library additional library as a separate .zip file - this will need to be extracted to your Arduino libraries folder (on a Windows PC, this will be /Documents/Arduino/libraries, for example)

Please let me know if you have any problems!

Comments

Doug

I have this project set up with an ESP32 and just 1 reader, that controls 6 different lights depending on which RFID chip is read. The problem is if I leave the device off for more than about 10 minutes, when it is powered back on, it doesnt react to any RFID chips and gives a rapid fire readout on the serial monitor. Does anyone know why this happens or how to fix it?

Kurt Eulaerts

Hi Alastair, probably a stupid question but i constant get this error when trying to load the code > how to install this please? Compilation error: PN5180ISO15693.h: No such file or directory

Stephen Taylor

Hey Alastair - as always, I appreciate your content and knowledge. I keep running into an issue with this puzzle. Doing basically everything you, ESP32, PN5180s etc. I get everything to work with 3 RFIDs but when I try 4 RFIDs I get a fatal error and RFID 4 will not read the cards. Any thoughts?

Anthony Lesink

Hi Alastair, i'm trying to rewrite your code to work with RC522 RFID's but having a problem getting the UID in an unsigned int 8 format. Is there an equivalent of this line that you know for the 522? ISO15693ErrorCode rc = nfc[i].getInventory(thisUid); I've tried various methods such as the following loop, but I can't get it into the unsigned int format it needs. Any ideas? Thanks! thisUid += nfc[i].uid.uidByte[i];

Martin Semecky

Hi Alastair, Can Arduino NANO or others be used?

Oshuruth

Hello Alastair. First of all thank you for your work. I am trying to reproduce this project and I find that after a few seconds and a few failed readings I stop receiving the readings through the serial port (which I use as a monitor to verify that it works correctly) Firstly I tried an arduino mega and I thought that the problems could be due to the different voltage levels, so I changed everything and I did it exactly the same as you (with a esp32), but that problem persists. Can you think of any idea what could be causing it to be blocked (with different plates) Thank you and greetings.

MAYORGA HILARIO IVAN FERNANDO

me pasa lo mismo el puerto serie se detiene por error FATAL: Reading more than 508 bytes is not supported!