Escape Room In-A-Box : Part 9 (Patreon)
Content
I've just uploaded the latest part in my video series creating an "escape room in a box", and hopefully you'll agree that things are starting to take shape!
Seeing as this video is mostly about the physical design and layout, it's probably a good idea to mention a few specific details about some of the tools I use:
Software-wise, I've been using the following two, excellent, open-source programs:
Inkscape for the layout and design of the panels
LaserGRBL for taking the SVG output from Inkscape and sending it to the laser engraver.
Hardware-wise, the laser engraver I'm using is originally based on an Eleksmaker A3 Pro, but I've modified it quite a bit:
I've installed a NEJE "20W" laser module. I've written "20W" because that's the input power, rather than the optical power, which is more like 5.5W. However, it's still better than the 2.5W laser that came with the Eleksmaker. The exact model I'm using doesn't seem to be available any more, but it's similar to this one.
I replaced the frame with some much longer extruded aluminium V-Slot (like this), which gives me a working area of 1000mm x 800mm. I also needed to buy a longer length of GT2 timing belt to run along the new frame.
I'm still using the Eleksmaker ManaSE controller that came with the Eleksmaker - it's a good controller and it has support for dual stepper motors on the y-axis (one each side of the gantry), which I need because having extended the length of the gantry it's now a bit heavier. However, I've replaced the A4988 stepper module drivers it came with for Trinamic TMC2209 modules instead (a simple drop-in replacement, but they can deliver more current to the steppers, and are super-quiet)
I put in some aluminium honeycomb as a bed on which to place materials to be burned. This not only lifts the target off my workbench, but makes it easier to focus and see when the laser has cut all the way through, since you can see the beam exit through the underside.
I should mention that the laser is absolutely not necessary for this project - you can just as easily measure and cut the components by hand using a regular saw or drill. You'll also see me using a scrollsaw, which is great for some precision work but again not really required (I just really like using it!). I have this one.
As always, please do ask if you have any questions or comments as I go along!