Home Creators Posts Import Register Favorites Logout

Content

And after the earlier apology post, here's the project which I *meant* to post this month...

Now, I know that most of you, like me, are most interested in technology for escape room puzzles. And, on the face of it, this project might not seem that obviously escape room-related. But actually this was inspired partly by a recent discussion on the Escape Room Tech Facebook group (https://www.facebook.com/groups/EscapeRoomTECH/permalink/1471968793142007/) asking whether many owners used cameras to capture "reaction shots" of players in response to jump-scares or other theatrical set pieces in escape rooms. What I was thinking of was the sort of souvenir photographs that you often get of people screaming at the top of a a rollercoasters, etc., that are then printed onto keyrings. But while escape rooms don't have an obvious apex at the top of a rollercoaster climb, they do have room control software that can trigger photographs when certain in-game events happen. And it seemed that, while not that many people currently did it, lots of people thought it was an interesting idea....

Anyway, this coincided with the fact that it's springtime, and I've got blue tits nesting in a bird box in my garden, and I'd been wanting to take some photographs of them without disturbing them, so I'd been trying to setup an automated camera in the garden. And that was battery-powered, and I'm also building an escape-room-in-a-box that's battery powered....

... so here we go. This video describes the hardware and software code required to program an ESP32-CAM board to create a wide range of camera functionality:

Create timelapse videos

Trigger photographs to be taken with a switch, when movement is detected by a PIR sensor, or any other input

Trigger a photograph to be taken when a HIGH signal is sent from an Arduino or other microprocessor

Use onboard LED as a flash

Save photos to onboard SD card, or send them as an email attachment 

Power the ESP-32 from a single 3.7V Li-Po battery pack

I appreciate it's a little different from the normal projects, but I really hope that you might find it interesting, and perhaps give you some ideas for a piece of hardware that you haven't used in your escape room (or other!) projects up to now.

(And next project will be more directly escape room-related, don't worry!)

Hardware Used

ESP32-CAM: https://www.banggood.com/custlink/33KEli3R0U

ESP32-CAM programmer board: https://www.aliexpress.com/item/1005001872947921.html

FTDI programmer: https://www.banggood.com/custlink/3KKYoIGR6f

AM312 PIR sensor: https://www.ebay.co.uk/itm/202625567146

Li-Po battery shield: https://www.banggood.com/custlink/mGDROiH4GB

Code/Wiring

https://github.com/playfultechnology/esp32-cam

Please let me know any comments or questions!

Files

Programmable Wildlife / Security / Timelapse Camera Projects with an ESP-32 CAM

This video describes the hardware and software code required to program an ESP32-CAM board to create a wide range of camera functionality:- Create timelapse ...

Comments

Christopher Drumgoole

I'm getting the SD Card Mount Failure message, not sure how to fix it

Christopher Drumgoole

It’s 16G. I was able to run a simple sketch that identified the SD card type as 3, but the sketch used the SD_MMC library. I’ve tried updating my SD library. I’ll see if I can get a smaller SD card and try that

Christopher Drumgoole

I’ve tried switching to a 4gig and card, still getting the same error. I uploaded an SD test sketch and got the same error. However, the SD_MMC test sketch was successful. Will this code work with the SD_MMC library? I don’t really know the difference - but I see a lot of code references that will probably need updating. What are your thoughts?

Christopher

Hi, I know nothing of code but decided to give this a try as it looked so cool and love making homebrew escape rooms. I was able to follow the instructions but when I go to verify/compile I'm getting this error message 'SMTP_Result {aka struct esp_mail_smtp_send_status_t}' has no member named 'timesstamp'. Any ideas what's going on? Thanks

Stacy Hawkins

I am having trouble bringing the sketch up in Arduino IDE

Mariana Liberato

Hi Stacy. I'm having the same error. Have you found a solution?

Trevor Lyde

Any answer to this? Please.