Home Creators Posts Import Register Favorites Logout
haven't archived this post yet. have a subscription? use the importer!

Downloads

  • Clickspring Byzantine Sundial-Calendar Part 4 - Inch.PDF
  • Clickspring Byzantine Sundial-Calendar Part 4 - Metric.PDF

Missing 1 full-res photo, 2 files, as this post has not yet been imported.

Content

Hey Folks,

Episode 2 of the BSC build: All about the tooth, the whole tooth, and nothing but the tooth...

Cheers,

Chris.


 -------- Video Notes -------- 

 Amazon Affiliate links:

Cameras: 

Panasonic GH5 - https://amzn.to/2rEzhh2 

Panasonic X920 - https://amzn.to/2wzxxdT

Tools & Shop Products:

Solidworks 2013 Bible: http://amzn.to/2FObS1D

Dykem 80300 Steel Blue Layout Fluid, Brush-in-Cap (4oz): http://amzn.to/2HGPaJJ

Sherline Lathe: http://amzn.to/2pnXM19

Sherline WW collets: http://amzn.to/2FYZ7F8

The published work of the late WR (Bill) Smith:

Files

Previews only

Constructing A Byzantine Sundial-Calendar - Part 2 (Cutting The Wheels & Pinions)

Hey Folks, Designed and constructed in 2016-2019 as a companion project to the Antikythera mechanism, this video series is an alternative look at the second oldest geared mechanism from antiquity: The Byzantine (London) Sundial-Calendar. I designed the project as a sort of 'gateway' project into more complex horological work, especially if you're already comfortable with model engineering, and maybe feel like tackling something a little unusual. I've seen some outstanding builds of this project over the intervening years and would love to see more. So, if you'd like to build along with the series and help me make these videos, the plans for the project are available as part of the $1 tier on Patreon, find out more here: https://www.patreon.com/clickspring/about Those of you who are Patrons will notice that for this YouTube release of the series I've spruced up the intro card and soundtrack, and also combined a few episodes together to make it all a bit more efficient for the viewer. For those who are seeing this narrated build series for the first time, do please enjoy! Cheers. Chris. ________________________________________________________ A very special thank you to Patrons: Sinking Valley Woodworks Glenn Trewitt Christopher Warnock Guy Loughridge Charles Frodsham & Co. Peter John Richardson Sam Towne Adam Slagle Robin Haerens Mitchell Collins Daniel Taraldsen Jeremiah G. Mort L'Enfant Watch Company C. A. Patrick Voigt Steven R. Crider Gary Levario Mark Coburn Pete Askew Jeff Armstrong Ralph McCoy Jim Popwell Kaedenn Bradley Pirtle PaxAndromeda Thomas Eriksen Michael Hardel Tim Ball Grant Michener Jonathan Teegarden Steve Hossner RuKiddin06 John Maksim RobinP556 Lea Bruder Armagus John S Dilsaver matt mcparland Daniel Cohen Larry Pardi Sean Kuyper Samuel Irons Dan Keen Florian Ragwitz Matthew Middleton Matteo Neville Olof Haggren Stassinopoulos Thomas Dave Seff Tim Bray ________________________________________________________ The published work of the late WR (Bill) Smith: Workshop Books: https://wrsmithclocks.com/books/ DVD's: https://wrsmithclocks.com/dvd/ Metal polish: https://wrsmithclocks.com/polish/ References: Original Artefact: https://collection.sciencemuseumgroup.org.uk/objects/co1082/byzantine-sundial-calendar-sundial-perpetual-calendar Michael T. Wright (curator): https://en.wikipedia.org/wiki/Michael_T._Wright_(curator) J.V. Field & M.T. Wright, “Gears from the Byzantines: a Portable Sundial with Calendrical Gearing”, Annals of Science, 42 (1985), pp. 87 – 138. D.R. Hill, “Al-Bīrūnī’s Mechanical Calendar”, Annals of Science, 42 (1985), pp.139 – 163. J.V. Field, “Some Roman and Byzantine Portable Sundials and the London Sundial-Calendar”, History of Technology, 12 (1990), pp. 103 – 135. M.T. Wright, “Rational and Irrational Reconstruction: the London Sundial-Calendar and the Early History of Geared Mechanisms”, History of Technology, 12 (1990), pp.65 – 102. You can also help me make these videos by purchasing via the following Amazon Affiliate links: Cameras: Panasonic GH5 - https://amzn.to/2rEzhh2 Panasonic X920 - https://amzn.to/2wzxxdT Books: "Solidworks 2013 Bible": http://amzn.to/2FObS1D "Machinery's handbook": http://amzn.to/2pi7XE5 "Lathework: A Complete Course (Workshop Practice Series)" - https://amzn.to/3Zt1DJM "Drills, Taps and Dies", Tubal Cain: https://amzn.to/4c0e5H0 "Hardening, Tempering & Heat Treatment", Tubal Cain: http://amzn.to/2IdTQLw Tools & Shop Products: Sherline Lathe: http://amzn.to/2pnXM19 Sherline WW collets: http://amzn.to/2FYZ7F8 Optivisor Headband Magnifier: http://amzn.to/2HFg1FU Norton 1-by-2-by-8-Inch Fine/Coarse India Combination Oilstone, Red: http://amzn.to/2tTEPb0 Digital Caliper 6 inch/150 mm Electronic Vernier Calipers: https://amzn.to/48Ofcac Interapid Dial Test Indicator: http://amzn.to/2FPInwH Saint Gobain (Norton) - 4 Arkansas Stones + case: http://amzn.to/2HCOAMX Dormer A190202 Jobber Drill Set, 1.0 mm - 6.0 mm x 0.1 mm Size: https://amzn.to/2DR5fdb Dormer A190203 Jobber Drill Set, 6.0 mm - 10.0 mm x 0.1 mm Size: https://amzn.to/2ITfeTa Geevorks Spotting Drill Bit, M42 HSS High Speed Steel Drill Bit Set,7PCS 90 Degree Drilling Magnetic Base Adjustable Metal Test Indicator Holder Digital Level 14" - Tool Stand: https://amzn.to/2PkyoTV Proxxon 37172 Micro Band Saw MBS/E: https://amzn.to/2ONORR1 Anytime Tools Angle Block Set 1°, 2°, 3°, 4°, 5°, 10°, 15°, 20°, 25°, 30° Precision +/- 20 Seconds, Machinist Tool, 10 Piece Set: https://amzn.to/2QFqM2Y Consumables: Dykem 80300 Steel Blue Layout Fluid: https://amzn.to/3LvNAO8 Bergeon Professional Cleaning Rodico: https://amzn.to/3LyKKb3 Dialux Metal Polishing Compound White and Grey 4oz 1/4b: https://amzn.to/3vopCPo Blue Matador Abrasive Paper: https://amzn.to/3PRnQhJ General Purpose Latex Finger Cots: https://amzn.to/3ZsYrhi Proxxon 28174 Band saw blade for MBS/E Swedish steel, fine (24 TPI), Silver|Silver metallic: https://amzn.to/3RzIV1l

Comments

Graeme Brumfitt

Gday Chris, really enjoyed this one very interesting, love those little arbours, may have to purchase said book :) TFS. G

Everfalling

ok now how the heck did you pull off that last x-ray shot?

Stu

I'm still not quite sure how you're getting away with posting porn on Youtube. I guess it's confirmed that you're an actual wizard!

Stu

Ha. The wizard of Oz. It all makes sense now. ...I'll see myself out

Christopher Ingle

Can't wait to see this project complete. Would love to try the build myself but you sir have 10x more patients then me!!

Damien Miller

Which of the W.R. Smith books would you recommend to start with?

Michael Haymore

As always, great stuff! Quick question, have you ever posted somewhere what equipment you have in your shop?

clickspring

Hey Michael, I keep meaning to do a list like that, but I never seem to find a stretch of time to get it done properly - This is basically the core of the shop, with associated tooling and other bits and pieces that you would have seen throughout the videos: SC4 Lathe Sherline 4100 Lathe SX3 Mill Delta Rockwell Belt Sander Filing Machine Horizontal Band Saw Divisionmaster indexer Vertex Rotary Table, Dividing Head and 4" Vise. Assorted tooling, drill bits, cutters, collets etc Assorted shop made tools as listed here: <a href="http://www.clickspringprojects.com/shop-made-tools.html" rel="nofollow noopener" target="_blank">http://www.clickspringprojects.com/shop-made-tools.html</a> I'm sure I've missed a few things, but thats the main stuff that springs to mind!

shawn walderman

Hi Chris, as always superb from start to finish. I am assembling materials for the build. I have the sc4 lathe and I would like to add a wheel cutting attachment. Do you have any plans for the one you assembled. I think its a brilliant solution and would love to emulate it. Thanks for sharing your brilliance!

rjk

Hey Chris,excellent video. There's one small reoccurring issue that I see in your videos, and that's the voiceover microphone clipping occasionally. You may need to reduce its gain while recording - if you have a VU meter onscreen, basically just avoid it going into the red should do the trick.

Anonymous

Every time I see one of these videos, I want to get a mini milling machine. The wife, however, doesn't.

clickspring

"... but think of all the money I can save for (insert Mrs Manup's hearts' desire here) by using the mill (and lathe!) to fix things around the house..."

Kaylee Fisher

Loving this series Chris! :) Dumb question; where do you get all your brass and steel stock & rod? I'm keen to try my hand at some of this stuff, and... I don't really know where to start!

clickspring

Terrific to hear that Kaylee! You should be able to Google search a local supplier of brass and mild steel stock nearby - try your home town+"brass supplies". There are also metal suppliers like <a href="http://www.onlinemetals.com/" rel="nofollow noopener" target="_blank">http://www.onlinemetals.com/</a> that you can order from online. Local machine shops are a great source of cheap material too. Aluminium rod stock in particular is a great first material to practice with on the lathe and mill - its very kind on the tools, machines beautifully and is generally very cheap and readily available. Please feel free to ask as many questions as you need to :)

Peter Kransz

Coffee in hand, I can't think of a better way to start the morning by watching these videos. They always put a smile on my face.

Chris Muncy

Fantastic as always, Chris.

Andy Copsey

We almost... almost caught a glimpse of your face at 6:52! One day we'll see the man behind these absolute masterpieces! I've always been an avid watcher (and now, proud supporter) of these videos. And despite not having any capable skills in engineering or fabrication, and not understanding much of the jargon, I still find these missives a true delight, and a real inspiration.

CG Hannah

Hi, I am amazed by your work! I hope my question isn't rude but how valuable will the clock be once you're finished?

clickspring

Its hard to know really - I guess the only way to determine it would be if the lucky Patron who ends up owning it, should one day put it up for sale. Great to have you watching mate :)

Mark Smith

Hey chris, loving your work and passion, the effort and dedication you put in to everything you do is amazing, i have never felt so compelled to support artist, i wish I could offer more. Thank you can't wait for more.

Paul Francis Madden

Wonderful video Chris. I really like the workshop hints that you share, and its a real pleasure watching raw material come to life. Your set-up for cutting gears is fantastic. Thank you for sharing Chris. Paul.

Andrew Robb

Awesome as usual. I Thoroughly enjoy your videos. And this project is super interesting from a historical perspective.

Keith Arrington

Hi Chris! I joined Patreon recently for the sole purpose of supporting your work! What CAD program are you using for the design & plans?

clickspring

Terrific to have you on board Keith! I use Solidworks, although consider Fusion360 instead - same parametric modelling capabilities, but free for home users.

Joe Fisher

Every time you're cutting gear teeth and you go back to regular speed as those last two teeth are perfectly formed together...most satisfying moment, ever.

Lars U. Lamm

Hi Chris. I am so impressed by the gear lay-out in this project both as regards relative simplicity relative to the information obtained, and also the rather precise periods. The idea of gluing, heating and "acetoning" the workpiece to a fat mandrel is very smart and makes a lot of impossible tasks possible. For a start I had problems with the piece loosening if any chatter at all, but that was solved by roughening the gluing surface with emery paper. It was especially a problem when boring large mm holes with spiral drills. Now I drill my holes a few mm short of the end lumen before gluing and finalize with a cutter in the lathe.

clickspring

Yes Bill Smith's Super Glue Arbor idea is truly a workshop blessing - there are so many tasks in this build that would be much more challenging without them.

Terry L Lembke

hi, Chris. I was just curious when the next of the series are coming out . Just anxious you have built both mechanisms already right ?? I hope it's ok to ask ?

clickspring

Hey Terry, I'm currently working on 2 Antikythera Fragment videos at present, refer to the [status],post for more detail. The first of these 2 fragment videos should be out in a day or so, and the next should follow a few days after that. Antikythera episode #4 will follow these two, so the the next BSC episode will be sometime late next month at the earliest. I have constructed a prototype of the BSC, but not the AM. That is effectively being built episode by episode - Cheers, Chris

David Paterson

Fascinating, but a design question. Why did you pick these non-integer sizes on some of the arbours. The Lunar zodiac display arbour, for example, is peculiar in both inch and metric. My thoughts were the wheel would be first drilled on 3mm/ 1/8th, put on an arbour to cut teeth, and then bored in a wheel chuck to ensure concentricity of the hole with the teeth? Arbour made to match? cheers David

clickspring

Hey David, 3.18mm is 1/8", 4.76mm is 3/16", both nice common Imperial reamer sizes. I have specified reamed fits in some of the mating parts, to ensure a close fit for the subsequent adhesive/solder bond, which is particularly important for an adhesive like Loctite 603. More generally, the mix of Imperial and Metric units across the design is simply a function of the available drills and reamers in my part of the world - The model engineering suppliers tend to supply good quality and well priced Imperial reamers, but the drills are almost always metric. Its just a fact of life that we readily navigate and build in both. But as with all designs, you can simply use the nearest cutting tool in your index, after examining for any possible consequences. Cheers mate :)

Jon Voisey

Hi Chris, I know I'm well behind the curve on this, but I've been working through Ptolemy's Almagest and just got to the section where he calculates the width of the eclipse windows that you have on your solar dial here. However, he comes up with a slightly smaller value of ~30.40º. But from this video, it looks like you used a value of 34º. I'm curious where that number came from.

clickspring

Hello mate, that came from a NASA/JPL discussion where they put the average eclipse season at 34 degrees (when considering all factors). The eclipse prediction feature is an additional capacity not present in the original device, hence the use of the modern figure - Cheers :)

Theresa Holl

Can anyone please say the name of the tool at 6:40? So simple and useful!

Jon Raymond

I know I'm late to the game on this comment but the spindle you use to cut the gear teeth on the lathe, is that a purchased part or a shop made one? I have a horizontal mill that I've always wanted to attach a small spindle to the over arm support and this looks like exactly what I need.