Home Creators Posts Import Register Favorites Logout

Downloads

Content

(Non-EA version: https://www.patreon.com/posts/125972766)

Features

  • Neural Rendering

    • DLSS 5 (requires a RTX 5000s series GPU)

  • Frame Generation

    • NVIDIA DLSS 4.5 (with Multi Frame and Dynamic MFG)

    • AMD FSR Frame Generation 4.0 (falls back to 3.1 on older GPUs)

    • Intel XeSS-FG 3.0

  • Temporal Super Sampling

    • NVIDIA DLSS 4.5

    • AMD FSR 4.1 (falls back to 3.1 on unsupported GPUs)

    • Intel XeSS 3.0

  • Latency reduction

    • NVIDIA Reflex

    • AMD Anti-Lag 2

    • Intel XeLL

  • Render ReShade effects before UI blending (only while this feature is active: no add-on support). ReShade installation is not included.

  • HDR in borderless and windowed screen modes

  • Custom FPS limit

  • Ultra-wide unlock with UI fill (ad-hoc)

  • and more

Requires ELDEN RING version 1.17(.2), 1.16, 1.14 or 1.13, NIGHTREIGN version 1.03.3. Older versions of the games are not supported.

Pirated copies of the games are not supported.

You cannot play in the official online mode while using ERSS. (The mod doesn't affect your save data, however.)

Quick-start:

Prerequisite: Turn on Hardware-accelerated GPU scheduling in Windows graphics settings (required by DLSS-FG, expect screen tearing and stutters while it is disabled)

Installing ERSS

  • Extract ERSS.7z to ELDEN RING/Game.
    If you're also using ReShade: rename DXGI.dll from ERSS to D3D12.dll

  • Disable Easy Anti-Cheat (see below)

  • Launch the game and press F1 on your keyboard to open ERSS configuration overlay

https://youtu.be/XIVR0vqaj3c

Disabling Easy Anti-Cheat

  • Create a steam_appid.txt file in ELDEN RING/Game and insert the number:

    • For ELDEN RING: 1245620

    • For NIGHTREIGN: 2622380

  • Change the game's launch command to the following (Steam on Windows):
    cmd /c start eldenring.exe & rem %command%
    On SteamOS (Linux native client):
    cmd=(%command%); cmd[-1]="eldenring.exe"; WINEDLLOVERRIDES="dinput8=n,b;d3d12=n,b;dxgi=n,b" "${cmd[@]}"

Installing ReShade with effects injection (OPTIONAL)

See: huutaiii.dev/go/erss-reshade-inject

Notes

  • Using Full-screen mode is not recommended as it may cause many issues, switch to borderless screen mode or turn on Override Full-screen State setting in ERSS instead.

For Wine/Proton users (including Steam Deck, Linux and macOS users):

  • The mod's overlay may be invisible while running in exclusive full-screen.
    Workaround: switch to borderless mode, or turn on "Override Full screen state" in ERSS advanced settings.

For macOS users (or those running the Steam client for Windows through Wine instead of using the native Linux Steam client):

  • Rename DXGI.dll from ERSS to D3D12.dll

  • Add DXGI and D3D12 to the DLL overrides setting in Wine configuration. See wiki.winehq.org and the documentation of your Wine wrapper (Crossover, Whiskey, Bottles, etc.)

  • Use Steam for Windows launch command for disabling EAC.

Notes about usage with other mod loaders (Special K, EML, me3, etc.):

  • The DXGI.dll loader that comes with ERSS should work alongside EML, me3 and some other mod loaders (except Special K).
    Do not use other mod loaders unless the previously mentioned methods fail.

  • Remove the included DXGI.dll file.

  • ERSS.dll and ERSS folder must be in the same directory

  • Make sure ERSS.dll is loaded as early as possible

  • Steam overlay may refuse to appear, recording might not work.

  • For Special K users:

    • Accept that things might randomly break.

    • Delete the DXGI.dll file that comes with ERSS if it's installed to the game directory.

    • Add ERSS.dll to SK plugin list.

    • Try different load order values for ERSS.dll.

Recommended mods

Known issues:

  • Crashes when launching the game with ReShade addons installed. Solution: Enable HDR in Windows display settings.

  • DLSS-FG silently disabling itself: reset Elden Ring's profile in NVIDIA App/Control Panel.

  • Flickering global illumination, most visible in shaded areas. (It's caused by NVIDIA drivers and ELDEN RING itself.)
    Workarounds:

    • Restarting the game.

    • Limiting FPS to keep the GPU load below 100%.

    • Rolling back NVIDIA GPU drivers to version 552.x

    • Using DXVK + VKD3D (doesn't support DLSS on Windows, it does on Linux however)

    • Setting Global Illumination to Low can reduce the intensity

    • Some reported that limiting the game's frame rate below your GPU's capability may reduce the flickering.

    • Changing various settings: FPS limit, Reflex boost mode, graphics quality, etc. may reduce the flickering.

  • Minimizing in windowed mode while FSR-FG is enabled crashes the game.

Change log:

v4.16.2

  • Fixed FPS unlock in ER 1.17

v6.0

  • Added DLSS 5 Neural Rendering integration.

  • Reworked ERSS render loop: improves CPU efficiency (~40%), stability and frame pacing, reduces VRAM usage.

  • Updated dependencies:

    • NVIDIA Streamline 2.14.16

      • Allow V-Sync with DLSS-G Dynamic mode.

    • NVIDIA DLSS 310.9.16

    • FidelityFX 2.4.0: Frame Generation 4.0.2 | 3.1.6, Upscaler 4.1.2 | 3.1.6

      • Added FSR version selection

  • Fixed several race condition crashes at various reload points (title screen, loading screens, changing resolution).

  • ELDEN RING: Fixed FrameGen HUD mask.

  • Fixed XeFG not working when letter-boxed or pillar-boxed.

  • Override Full-screen Mode:

    • Switching back to windowed mode no longer makes the window stay on top.

    • Switching to and from another window no longer makes the title bar reappear.

  • Custom ReShade effects runtime no longer renders on the title screen.

Join my Discord server!

  • Newest release is at the bottom of Attachments

  • Extraction password: huutaiii (Use most recent 7-Zip or WinRAR)

  • ERSS often triggers false positives in malware (virus) scanners and Windows Defender. As a result it may get quarantined automatically when unpacked.
    Workaround: Restore ERSS.dll from quarantine, and add it to the Windows Security's exclusion list.
    Or, a less safe method, add Elden Ring's Game directory to the exclusion list. Then move ERSS.7z to the game folder and extract in-place.

Files

Comments

Hyyt Hilman

Ok, so I'm not too sure if I should set the in-game option to borderless or leave it on exclusive fullscreen when using DLSS-G. Edit: Yeah, HDR doesn't look right with DLSS-G or FSR-G on. It's more or less fine, if not a little washed out, but light sources are completely white-crushed even with the HDR settings set properly in advanced settings. When I turn Fullscreen to Borderless it gets super color crushed and just looks awful, so I'm assuming that I'm supposed to leave it on Exclusive Fullscreen in the game options.

huutaiii

You need to set the game to Full-screen and turn on HDR in both the game's settings and ERSS. The brightness settings in ERSS aren't accurate to the HDR standard so the 'correct' value might not match your monitor's specs. Unfortunately I haven't been able to exactly replicate ER's HDR because they're using a quite unusual method of configuring the monitor and metadata. My best guess is it's in HDR10, because ER's own color management looked correct on my monitor when I forced the output format to that, but somehow the standard HDR10 implementation is completely off when I tried it, so I had to tweak it a bit, I'm still trying to figure it out. sorry there isn't much I can do ATM as I'm yet to be an HDR expert.

Hyyt Hilman

I see. No worries, just wanted to bring it to your attention. Thanks for the reply.

CoffeeBerry

Is there a way to uncap framerate? (without frame interpolation)

huutaiii

There's a frame rate unlocking mod on Nexus which is what I'm also using.

Henlea

My game's all stretched after enabling this on ultrawide. Is there any way to fix that? And is there a way to force enable DLSS3 FG on RTX 30?

huutaiii

I'm working on a fix for the stretching, but you may also install the 'Remove black bars' mod on Nexus to fix it yourself. And no, it's not possible to run DLSSG on 30 series GPUs.

Whiteness

Man, I thought that variable name was WINED LOVER RIDES instead of WINE DLL OVERRIDES. I liked the idea my first impression provided more ☹️😆

huutaiii

lol I'll say it like that from now

Onkelbob

Will there be a version with DLSS 4 available for download next week when the RTX 5090 is released? Or will you offer the version?

huutaiii

I'm not sure yet. I still don't know when the new API will be available, if there's one, and whether it's gonna require new hardware. It's seems swapping the DLLs work for now until they unlock the ability to override DLSS4 on games with DLSS3. You can grab the DLSS4 files from games that supports it and replace the ones I shipped with ERSS, then set the DLSS Render Preset to 'default' to use the new transformer model. Swapping the nvngx_dlssg.dll seems to break frame gen on my end so you should avoid doing that

ThunderChild

Runs much better and more stable than what PureDark put out. Great work. GI flickering is a non-issue with raytracing off, which is a bummer but RT is pretty unoptimized in this game anyways.

José

Tranformer now has a second preset, preset K. On 1080p I can't help but find Transformer to look weird in this game, I see some weird tearing on my character's head.

huutaiii

You should be able to use the new preset by choosing 'default' in ERSS overlay after swapping in the new DLL. From my experience preset J seems to response poorly with missing or incorrect motion data. ER's motion data is kinda broken, on certain models more than others, and it's simply impossible for me to fix that. Even in previous FromSoft titles it's also broken and I'm not sure why

Onkelbob

First of all, thank you for your answer. I have one more question. Something that has been mentioned several times in the comments is that the included HDR function does not display the correct colors in the game if you turn on frame generation. I'm wondering if it would be possible to use the HDR color display in the game and start frame generation via the mod. Would it be possible to start frame generation with the standard HDR mode in the game and if not, why doesn't that work? I hope you understand what I'm getting at.

huutaiii

To make frame gen work I had to replace the game's UI blending pipeline which unfortunately also handles HDR color conversion

Onkelbob

ah okay, I understand. Great work so far. Are you trying to improve your implemented HDR even further? Smooth Motion will be available for the RTX4000 series at some point. I'm excited to see how that works.

huutaiii

Unfortunately I've not been able to learn more about Elden Ring's HDR to make improvements in the mod. I'll give it another try. Oh I didn't know about smooth motion. I wonder how they're gonna make that work

null (edited)

Comment edits

2026-09-05 07:00 For the GI flicker I've noticed using alt+enter a few times seems to resolve it, but that then forces game to run in a window and doesn't allow going back to fullscreen, can use something like Lossless Scaling with LSFG disabled to make that window fullscreen though. Wonder if GI has some issue with games fullscreen mode (maybe Windows full-screen optimizations are affecting something?)
2025-02-02 01:21

huutaiii

It happens in windowed/borderless mode as well. My guess is that the driver somehow can't properly handle submitting multiple GPU workloads in this case

Onkelbob

I only get flickering with the new presets J,K if I move the camera too quickly. I play without FG.

Shy

Not sure if you saw on the nexus page but in my case disabling Nvidia Reflex in the mod removed the GI flicker completely.

huutaiii

with FSR FG or DLSSG? On my end disabling Reflex doesn't fix it for either. Also FYI, Reflex isn't implemented in the Nexus version.

Shy

I see I didn’t realize. But I’m currently running with no frame generation and no Nvidia Reflex just DLSS at 60 FPS and that fixed every instance of flickering after trying multiple versions of the mod. Was even repeatable between game restarts for me but if the nexus version has no reflex I’m unsure why this solved it then as that was what I tried first.

huutaiii

oh do you mean the low latency mode in NVIDIA control panel? I never turn it on so I never knew

Shy

I didn’t remember that Nvidia Reflex wasn’t in the nexus version but no literally the reflex toggle in the latest patreon version stopped flicker for me. I could simply turn it off and on and you would see the flicker come and go immediately.

Manuel Herrera

latest version breaks HDR BTW. it doesn't let it "trigger". And I mean the REAL HDR that only works on full screen. and also BTW... there's a workaround so you can get the real HDR working on windowed mode with another mod: https://www.nexusmods.com/eldenring/mods/2794?tab=description it's worth noting that the game's HDR implementation is the only one that works properly.

huutaiii

it's simply impossible to use the game's HDR display mapping with frame gen. what's your setup? it was working on my end. FYI, ERSS also implements the same workaround as the one you linked

Manuel Herrera

I managed to get the windowed mod working as intended. It launches in full screen, grabs the HDR data, and when I switch to windowed mode, the game doesn’t bug me to revert to SDR. I'm currently using frame generation with "lossless scaling" alongside HDR, and it works 100% fine. That said, I prefer FSR for performance reasons, so I'd rather use that instead if possible. So yes, it’s possible to use frame generation and HDR simultaneously. However, I’ve run into an issue when using your mod as a standalone (not as an addon): the in-game HDR doesn't fully do its thing. Normally, when you start the game, it enables HDR and it starts off looking oversaturated, then the colors correct themselves after clicking start. In my setup when using your mod in standalone mode, the colors look off because that initial oversaturation phase is missing. I suspect the game triggers HDR immediately, but the proper "log" color profile (which corrects the colors) only comes in a few seconds later. I know it sounds a bit confusing, but in short: HDR in windowed mode with lossless scaling for frame generation is possible, the thing is, because your mod doesn't allow the game the display to "trigger" HDR, when you enable HDR manually the display just boost the image to 1000 nits (or whatever you have it set at) but it's using the SDR color space, so everything looks wrong.

huutaiii

Did you turn on HDR in Windows settings?

huutaiii

The reason the other software allow using frame gen with the game's own HDR is that it has an improper integration of frame gen, it doesn't provide the API with correct motion data and doesn't handle UI masking resulting in inferior image quality. In order to properly integrate both frame gen methods I had to replace the game's UI blending pipeline which includes color conversion. In turn I had to re-implement HDR, and I decided to follow Microsoft's official documentation instead of trying to recreate ER's proprietary and non-standard implementation.

Ikki

XeSS Anti-Aliasing looks really buggy even when updating to XeSS 2, on a level that is far inferior even to FSR3, do you have any idea of whats causing it? And if you can manage to fix it, is there a way to implement XeSS 2 Frame Gen? To players without NVIDIA, XeSS is the best upscaler generally but its really strange on ERSS

huutaiii

Unfortunately the XeSS 2 SDK doesn't seem to be publicly available. I'm sorry but it's not possible to update the mod to support XeSS 2 and XeSS frame gen, at the moment.

Ikki

Okay then, but do you know why XeSS looks so off compared to other games? Generally its far superior to FSR3

huutaiii

my guess is that it's because of how the motion data in this game isn't very clean and the grass/leaves are not rendered properly, and XeSS somehow is more sensitive to that. but AFAIK XeSS works differently on intel GPUs which I don't have so I can't really judge it.

ThunderChild

Is there any way I can use DLDSR+DLSS+FG+HDR in Elden Ring? I would love to try 4320p, DLSS Ultra Perf and FG with HDR, but the game cannot be set to fullscreen for DSR to work.

huutaiii

Unfortunately I can't make DLSSFG work in exclusive full-screen for ER without some issues. Here's a workaround I found out: - Change your display resolution to 4320p to enable DLDSR on everything - Disable DPI scaling for ER, screenshot: https://tinyurl.com/bju7v69z - Launch the game and set it to 4320p

ThunderChild

Awesome, you're the best huutaiii

Manuel Herrera

I guess you made the impossible, possible! Great job with the new update BTW, HDR highlights and colors now perfectly match the original implementation! I can finally use FSR and get proper HDR at the same time. So again, great job!

endrick irawan

There is small black square on the left of my screen with this mod please help.

Jamal Sol

This is absolutely incredible. I have only one real issue- when using DLSS transformer model the image quality is incredible but turning the camera creates giant smeary block artifacts around the edges of the screen. Is there a fix for this?

Mᴀɴ ᴏғ Tᴏᴍᴏʀʀᴏᴡ

First of all thank for this incredible mod! I have a problem there are black squares on my screen on both sides left and right only when I move the camera. DLSS and FG on.

Jamal Sol

Having the same issue with FG off when using the transformer model. If I change to preset E it goes away

huutaiii

I think this is a general issue with the new models, I've seen a similar behavior in officially supported games as well, where it fails to track a feature and creates a smudge. There's a nvngx_dlss.dll file that has a higher version number (310.2) than the one I included, perhaps using that version would help.

huutaiii

can you show me a screenshot or a recording of it?

Jamal Sol

Thank you so much. I will definitely try that and report back. Again, your work is a godsend. Thanks for your diligence.

devnue

Here's a video of it happening in a different game: https://youtu.be/WVbs8Vln2AM?t=78 , I believe that, as Huutaiii stated in another reply, it's a general issue with this new transformer model. The only way I have seemed to alleviate it is to disable NVIDIA Reflex in both NVCP and in the Mod Settings, and the barely helped if at all. I also tried updating to the latest DLSS 310.2.1 dll and noticed no appreciable change. It's quite a shame as the visual quality while standing still is the best I've ever seen, especially running it on 1440p DLAA mode. I imagine we will simply have to wait for a newer, updated model to hopefully fix these issues.

Onkelbob

Unfortunately, I don't quite understand how to use your reshade. Can you please explain it to me in more detail?

huutaiii

My modified ReShade is only required if you want to use the Inject Effects option in ERSS. Just install it like you would regular ReShade, then the option in ERSS settings will be unlocked Otherwise you may use the official ReShade with full addon support

Onkelbob

Ah, okay, I see. And I can use your reshade with Frame Gen?

huutaiii

Yes, frame gen should work normally.

Onkelbob

Which HDR values with FG enabled are closest to the original HDR values from ER? And which ones do you use?

huutaiii

unfortunately I can't tell you which values are correct. on my 400 nits IPS I used brightness = 400, gamma = 1.2

Onkelbob

I understand, I'll try something out. I noticed that with FG, DLAA, and preset K enabled, the shadows flicker extremely in some areas. Is there a way to avoid the extreme shadow flickering?

huutaiii

Try using the "Mitigate GI flicker" option or other workarounds I listed in the known issues section above. It's caused by the game/ driver profile interacting poorly with frame gen so it's not possible for me to fix it

Arkadiusz Gochnio

I'm having trouble with HDR + Framegen + high FPS + adaptive sync/vsync. I can't find the correct settings that will allow me to use all the features. When I disable V-sync I get 100+ native FPS (200+ with framegen) and terrible tearing. When I enable v-sync it's stuck in 60 fps, framegen or not. Any way of reliably turning on all of these features?

huutaiii

Are you running the game in exclusive full-screen? How did you turn off VSync?

Arkadiusz Gochnio

Thanks for quick reaction! I tried both "Fullscreen" and "Borderless window" from the game settings. I did turn off v-sync in Nvidia control panel, for eldenring.exe. Also I made sure I enabled hardware scheduling in Windows. There are no overrides of this for eldenring.exe

huutaiii

try setting vsync back to "use 3d application setting" and running the game in borderless. HDR can be enabled by turning on HDR in both Windows display settings and ERSS settings

Arkadiusz Gochnio

Yes, in this mode I get 150+ frames, but also quite bad screen tearing. Can I do anything about it? Enable freesync/g-sync? I checked both "variable refresh rate" checkbox and "DLSS-G sync", but no dice, screen's torn when I move the camera quickly

huutaiii

oh. turn off the variable refresh rate setting in ERSS, it can cause problems with frame gen on, DLSSG should enable GSync by itself. and leave DLSSG frame rate limit on, as letting the game run beyond your monitor's refresh rate will cause tearing.

Arkadiusz Gochnio

Happy to report that it's working great using the settings you recommended. Thank you!

Amine Chihi

Hello, in my steam deck, it seems I activated everything, the mod works, but there is a yellow inscription on top "Hardware-accelerated GPU sheduling is not enabled". I also can't select Nvidia DLSS-G, there is only AMD FSR-FG

huutaiii

The Steam Deck does not support DLSS-G so only FSR-FG is available and it should work normally despite the yellow warning message. Also you should install the RemoveFrameTimeConstraint add-on if the interpolated frame rate is below 40fps to keep the game from slowing down.

José

FPS unlocker? Wow man, this is really becoming the definitive Elden Ring QoL mod now.

Rourke

Dude, this mod is a must. Now that it's got DLSS FG and even MFG! Makes me wonder why Fromsoftware couldn't do it, they live in 2016.

乐天 周

My device is the ROG Ally X(BAZZITE OS). After installing the plugin, the overall effect is great. However, when I rotate the right joystick, I notice a very brief display glitch on both sides of the screen — it looks like a rendering delay or some kind of visual artifact.

乐天 周

Yeah bro, same here. I have no idea how to fix it — it's happening on both my Ally X and my 4070Ti PC

乐天 周

After installing this mod, the issue was resolved — thank you so much! There's just one small issue: when frame generation is enabled, the screen flashes briefly during in-game teleportation. It's a bit uncomfortable when playing at night with the lights off. This doesn’t happen when frame generation is turned off. I’ve tested it across different versions and even on another PC — the result is the same. Hopefully this can be optimized!

Sandor Horvath

The ERSS-FG menu is in the upper screen, and I can not move it down. So now it's useless. How can I move it down so I can configure it?

huutaiii

try deleting imgui_ERSSFG.ini in the folder ERSS2 if that doesn't help, can you show me a screenshot? also are you using something like reshade or special k?

Sandor Horvath

Thanks for the quick answer. I managed to configure it on another monitor. I am using this with R.E.A.L. VR mod

hoangkhang ly

I got a problem, The ERSS keep saying "invalid elden ring executable version 2.6.0.8, failed to install hook for executable" is there any solution bro?

huutaiii

there should be no copy of the game that says 2.6.0.8 where did you get it?

hoangkhang ly

If you are asking about the game then I bought it on steams, version 1.16, about the error I think it says 2.6.0.0 or 2.6.0.8 (not really remember cause my last play is about a week ago :D )

hoangkhang ly

Ah one more thing, I did something to run the game on my unsupported VGA, maybe it cause the problem?

huutaiii

did you install v4.8.1? the new versions should work on ER 1.16

hoangkhang ly

Yep I did. Well, I may know why this issue occur. I need a special d3d12.dll file to run the game on my VGA, and it will replace your file d3d12.dll (ERSS loader v4.8.1). Is there anyway to fix this? I really want to use your mod to increase the FPS while Im exploring on map. If there is noway, then thank you very much for your support. :D

huutaiii

try renaming the d3d12.dll that comes with ERSS to dxgi.dll

hoangkhang ly

Oh finally it worked, thank you very much for your support :D

Zoltán Virágh

Any chance of adding Ultra Wide Screen support that's compatible with the seamless coop mod? Or is that more a mod issue?

kotn3l

just load ERSS with modloader (move ERSS-FG.dll and ERSS folder into the mods folder where other dll mods are loaded from, and delete the d3d12.dll) OR load seamless this way and you dont have to move ERSS

Christopher

Hi there, I was just wondering if this Full Dynamic Range Fix mod is even necessary with ERSS-FG installed? https://www.nexusmods.com/eldenring/mods/4919?tab=description Is this just another HDR fix that ERSS-FG already addresses and makes redundant, or should I try and use the above mod as a ReShade? It seems like a nice vanilla+ option but I'm not too familiar with how to even use ReShades with ERSS-FG. Thank you for your hard work!

huutaiii

I think that ReShade preset is meant to be used in SDR rather than HDR so you likely won't need it if you use HDR.

B33LZ

Hello, just subbed to you for the 2nd time to update FG. It does it's job overall but whenever I enable DLSS - not FG but Upscaler - I have weird boxy artifacts whenever I move my camera. Can you guide me how to fix it? Thanks - - (I already installed vignette remover) I play at 4K locked to 60FPS : https://i.imgur.com/kzWil1A.jpeg

huutaiii

Unfortunately that's an issue with DLSS 4 and Elden Ring's sky that can't be fixed. You can reduce the effect by getting higher frame rates or changing DLSS render preset to E/D instead of K/J

Levi Ainsworth

I'm having an issue when this mod is installed, in the main menu I can bring up the overlay, but once I load in all I get is black screen. If I press windows key or have another window open, the image will return. As soon as I return to the Elden Ring window, it goes black again. Am I missing something?

huutaiii

are you using frame gen and running the game in full screen?

Levi Ainsworth

I am using frame gen, but I am running it in borderless windowed

huutaiii

I see can you send me the log files in ERSS2 folder?

Brandon Phelan

This is truly amazing! I'm loving that I can play at 4k/144Hz/GSync/HDR/DLSS/FG on my RTX 5090. Only problem I'm having at this point is the GI flickering due to FG. Hopefully that can be rectified in the future.

Brandon Phelan

For what it's worth, setting the FPS cap to 120 within the settings seemed to resolve the GI flicker for me. Once the FPS gets close to that of the refresh rate is when the flickering seems to happen.

Alec S.

I have to say, I've been enjoying this to its fullest, absolutely love it. That said, earlier today I upgraded my CPU to a 9950X3D, and while I'm not entirely sure if that's the cause or not, the game's been crashing at cutscenes. It works fine when I remove the files and boot it back up to watch them, though. More troubleshooting to be done, but any tips would be appreciated!

huutaiii

I'm glad you liked the mod, and very sorry for not replying sooner. Can you send me the log files though Discord, to help me try to figure out what went wrong? (They're in the ERSS2 folder in case you didn't know.)

Dre

Hello. I actually havent bought the game because I am not sure if I am capable of running it smoothly on my laptop so i pirated it for now. I tried the free erss mod but it gives me non supported executable version 2.2.0 . is there any way to get this fixed?

huutaiii

You can try updating your copy of the game to version 1.16.1

Dre

It is currently on 1.16.1 but the exe file is showing 2.2 which is weird. Is there any choice other than buying the game?

huutaiii

The only way I can think of is trying other sources for the game. Otherwise suppose you can make use of the refund button on Steam.

Alex M

When i push HOME key, i see the UI come up, but i cannot interact with it using the mouse. I'm also using luke ross VR mod, that may be interfering... i'm not sure. Does a game controller work out of the box with the UI? if not, how can i enable it via config change.

huutaiii

They should be compatible as I checked it before with both FG providers. You should also ask the other mod's developer if the issues have come back. Btw I think someone in my discord server mentioned being able to get both running.

SebK

Thanks, i'll ask there, so far i've tried to make it work together but no luck, crash on press either ''continue'' or ''load'' in the main menu, if i try to load any of the mods separately, they work fine

Rin Rose

Is the Mod compatible with version 1.16.1? I just updated my Game, reinstalled all of my Mods and this one but it keeps instantly crashing. When I remove the Files "ERSS-FG.dll" & "ERSSReShadeStub.addon" the game will launch however. I cannot rollback to 1.16.0 either since it's quite bothersome to do that. Thank you in advance

Rin Rose

And by instantly crashing, I mean literally not even reaching the Logo Screen, it's just black for a few seconds then crashes.

huutaiii

It should support ER 1.16.1. Did you also have ReShade installed?

Rin Rose

Yes, latest reShade version, latest Modengine2 & Modloader

huutaiii

There's a compatibility issue with ReShade 6.6 and current ERSS, so you can't use both at the same time for now. I'll be able to start working on fixing it this weekend. and just FYI, the mod is still usable with ReShade 6.5.

Rin Rose

So I'll just need to use an earlier version of reShade? I will immediately try and rollback to ReShade 6.5

선우 김

Can this be used together with Mod Engine + Seamless?

E2h0

Hello! I encountered a crash when trying to run ERSS-FG-v4.10.6 together with GG - Player List Overlay for Seamless Co-op 1.0.2 (https://www.nexusmods.com/eldenring/mods/8088). Disabling either mod allows the game to run normally, so it seems there’s a conflict between ERSS-FG and ergg.dll Could you please look into possible compatibility with the GG Player List Overlay? Thank you very much for your work!

E2h0

2025-11-11 04:42:58.447 - [ERROR] Unhandled exception (0xc0000005) at ergg.dll+0x24829 [0] ergg.dll+0x24829 > modengine_ext_init+0x6b09 [1] ergg.dll+0x1dc88 [2] ergg.dll+0x1f3de > modengine_ext_init+0x16be [3] ucrtbase.dll+0x37b0 > wcsrchr+0x150 [4] KERNEL32.DLL+0x2e8d7 > BaseThreadInitThunk+0x17 [5] ersc.dll+0x8c263 > modengine_ext_init+0x89813 [6] ntdll.dll+0x8c53c > RtlUserThreadStart+0x2c

huutaiii

Sorry for not responding sooner! I'm gonna take a look at it and will get back to you once I find the cause of the issue.

E2h0

Thanks for your work! Really appreciate you looking into it.

Сергій Скринник

Hi, will you update the mod with the newest dlss with preset M? Or is it possible just to drop the new dll in the bin folder?

huutaiii

Yes, I'll update the mod. And also yeah you can upgrade it to 4.5 yourself. I haven't done it myself but others are discussing about it on my discord server.

James

Sorry but where can I find ERSSReShadeStub.addon to download? Its not listed

huutaiii

You can find it in the v4.12 archive. It's not been changed since, I simply forgot to package it with v4 13.

James

Thank you!

Ogre

Dude this mod is sooo cool, I was sitting looking at the scenery today and I was wondering why my trees look like a VCR tv with no signal, found this and it has made the game look so good, completely eradicated the poor performance of the games anti aliasing. And I love the option to still have HDR enabled but finally be able to alt tab out, absolute god send.

Nicholas Adamek

Hi, I spent 6 hours with Gemini going down a rabbit hole last night trying to get this to work with Reforged and Reshade. I probably should have just asked you first but it was like fighting a hard boss in ER. Just stubbornly kept trying to get it to work. Any suggestions? I think the problem comes from Reforged having it's own Mod Launcher in the folder but no matter what combo I try of moving files between game and reforged folders I just keep crashing immediately or it will get through the bat file and just do nothing. Thanks for your help.

Ali Alhaddad

I might be late but in case you couldn't figure it out, I use this mod regularly with Reforged without any issues, just throw ERSS-FG.dll and the ERSS2 folder in the dll directory Reforged uses and it will automatically load the mod when you launch Reforged normally.

Gothan15

May i ask how you did it? cuz with reshade it give a black screen and ctd after a time

Nicholas Adamek

Honestly I don't remember. It was such a giant pain in the butt that I blocked it out of my mind.

dude

dude

please disregard, some combination of deleting shader cache from windows temp file + nvidia and all overlays (xbox, nvidia, steam) has resolved this issue. likely cache

Gothan15

For anyone having the same issue here is what solve it for me: 1- install reshadehex to the \Game folder of elden ring ,open the game and change the default addonds location to the offline folder of ERR. 2- Copy only the ERSS-FG.dll and ERSS2 folder to the offline folder and the ERSSReShadeStub.addon too. 3- open the game using the bat for offline mode and done

Stardog

v4.13.0 ERSS-FG.dll is detected as Trojan:Win32/Kepavll!rfn

Stardog

Free release detected as Trojan:Win32/Phonzy.A!ml

huutaiii

The fix will be uploaded soon

Just Joe

ERSS-FG.dll v4.14.0 now detected as infected with Trojan.GenericKD.79983441 by Bitdefender.

Miska Jäppinen

v4.15.1 doesn't work, fails silently. 4.15.0 works.

Zac Sanchez

I can't seem to get frame generation to actually work. I have it enabled, and DLSS seems to function fine otherwise, but my framerate stays the same no matter what I do with the frame generation options

huutaiii

Try resetting eldenring.exe with nvidia profile inspector

Zac Sanchez

Unfortunately, that didn't fix it

Naythan Jones

same i cant get to work ive tried everything tinkered for hours :(

Zac Sanchez

Switching to amd frame gen doesn't work either. It shows that frame gen is enabled, and has the framerate window telling me interpolated frame info, but the framerate just does not change. I'm running everything on a 5080/14900k system

Bráulio Gaspar

Why FG dont work??, can i use uptiscaler on this?

James

One thing I'd like to report incase anyone hadn't reported it is the framerate will drop over time, say if I have DLSS FG on its a smooth 120 ect it will drop to 110 and when I remove the FG my FPS will be in the 50s until I restart the game. No idea what triggers it. EDIT: I may have found a fix if anyone has experienced this on newer nvidia drivers, I can't remember what driver I was on, I think it was the hotfix after RE9 came out for the 4090 low performance, 595.76, I reverted back to 552.44 the Ghosts of Tsushima driver got the GI flickering issue and the degraded performance went away completely.

Archie

What worked for me is going into Nvidia switching from advanced 3D image settings to let the 3D application decide. You can do what I did and go ahead and set your global program settings for Elden Ring just incase and then switch to let the 3D application decide. Once I did that Elden Ring went from 60 FPS to 600FPS.

Archie

I have the same graphics card but I run a 9800 Ryzen. What worked for me is going into nvidia control panel and switching from advance 3D application image settings to let the application decide it went from 60 FPS to 600 FPS in Elden Ring.

Uncle Rusty

Hmm DLSS upscaling works but enabling frame gen is not working on my RTX 5080 laptop. Regardless of whether I set Dynamic, static 2x, or 3x etc my game's reported FPS is the same as if I didn't have frame gen enabled, which is about 90-110FPS

Arkadiusz

Hi, It is possible to run this mod with custom shader other than HEX? When I try to run another shader with this mod I can't open configuration :(

huutaiii

It should still work with official Reshade. You’ll only have to give up the early effects inject feature from ERSS. My modded Reshade is quite old at this point so it takes some time to merge with the new version.

Merked gg

Yo bro i have 7900xtx but want to use int 8 fsr4 is that possible i tried opticaler but it just crashes

Matthew

This is just amazing, thank for doing this :) Works like a charm <3

edward camacaro

The v4.15.2 release file is causing an error; when I unzip it, no files appear.

huutaiii

You need something that supports encrypted files like 7zip

Eyyup Sayli

After today's ER patch (game ver 1.16.2, eldenring.exe file version 2.6.2.0), v4.15.2 deterministically crashes on the wake-up cinematic that plays after dying to the Grafted Scion in the tutorial. Removing the D3D12.dll loader makes the cinematic play fine on the same character/save, so it's isolated to ERSS-FG.

Zack Zulkiewicz

anyone else having stuttering issues since new 1.16.2 patch?

huutaiii

I heard that there are some issues with the new Nvidia drivers. Perhaps you can try looking into that.

huutaiii

I can't reproduce this on my end. Are you sure it's not because of a conflict with another mod? I'm sorry about the late reply, Patreon didn't show your comment when I checked the other day so I thought it was deleted.

Eyyup Sayli

no worries. I don't have any other mod installed actually. I will re-enable and test again

Andrew Roming

Is there a way to remove the blak debug bar with white texts on top?

Giovanni Federici

So how are people getting FG to work post 1.16.2 update? Ever since 1.16.2 update DLSS works fine but FG stopped working 100% and I get an error: thread panicked: this game version is not supported ; expected Elden Ring 1.16.1. Clicking OK shuts the game down instantly but you can keep palying as long as you ignore the message.

huutaiii

ERSS does not show that error message, nor force quit the game, I think it’s from something else. DLSSG failing silently is an NVIDIA drivers issue, you can try doing a clean reinstall.

Giovanni Federici

I just did a clean DDU reinstall last week, but you were right about the error message not belonging to ERSS, it actually belonged to first person souls (my bad). Unfortunately though, DLLSFG keeps on not working and the weird part is AMD's FG works normally. I was looking through the ERRS-FG.log and found this: 2026-06-12 19:09:30.033 - Executable version: 2.6.2.0 2026-06-12 19:09:30.034 - [WARNING] EXE is newer than supported version AntiLag 2 is not supported, result: 80070006 Could this be the reason why DLLSG is failing to hook properly?

Eyyup Sayli

Enabled the mode again. Created a new character and game quits/crashes on the first cinematic, or any cinematic probably. It works fine during any save that I am in-game. This started happening after the latest game patch. Unlucky that you can't reproduce it. I don't have any other mods installed. Anyways.. I think it is not the end of the world.. I am disabling/enabling if there is a cinematic..

Eyyup Sayli

Better stack capture on v4.14.1 with Remove 60 FPS Limit ON — same crash offset (eldenring.exe+0x1aeaf05), but the full stack is preserved this time and shows ERSS-FG.dll+0x1434de at frame 4, sandwiched between Scaleform SetIdentity calls and a Wwise WriteBytes chain. Looks like the hook fires inside a Scaleform→Wwise→Scaleform path that the cinematic transition triggers, and on the new 1.16.2 exe it walks into invalid memory at GetMaxScale+0x8622f5. 100% repro: install ERSS-FG (any version 4.14.1+ confirmed), toggle Remove 60 FPS Limit ON, defaults otherwise (DLSS DLAA, FG off, HDR off), launch into a new character, then first cinematic crashes Toggling Remove 60 FPS Limit OFF and everything plays. Full ERSS-FG.log available if useful. Stack trace block: [0] eldenring.exe+0x1aeaf05 > Scaleform::Render::Matrix2x4::GetMaxScale+0x8622f5 [1] eldenring.exe+0x1aeab3f > Scaleform::Render::Matrix2x4::GetMaxScale+0x861f2f [2] eldenring.exe+0x19e601a > Scaleform::Render::Matrix2x4::GetMaxScale+0x75d40a [3] eldenring.exe+0xb18d8d > Scaleform::Render::Matrix4x4::SetIdentity+0x95f1fd [4] ERSS-FG.dll+0x1434de [5] eldenring.exe+0xb15053 > Scaleform::Render::Matrix4x4::SetIdentity+0x95b4c3 [6] eldenring.exe+0x26d5555 > AK::WriteBytesCount::WriteBytes+0x2f4595 [7] eldenring.exe+0x26d5860 > AK::WriteBytesCount::WriteBytes+0x2f48a0 [8] eldenring.exe+0x268c902 > AK::WriteBytesCount::WriteBytes+0x2ab942 [9] eldenring.exe+0x26553be > AK::WriteBytesCount::WriteBytes+0x2743fe [10] eldenring.exe+0xeb21d4 > Scaleform::Render::Matrix2x4::TransformByInverse+0x12dba4

Eyyup Sayli

BTW, I downgraded the game back to December. And your mod, both works without a problem with same settings.. so latest verison of the game def broke something

huutaiii

Unfortunately I still can't reproduce the issue See here: https://static.huutaiii.dev/litterbox/er2620-erss4141.mp4 My copy of the game is v1.16.2 global I also ran through it again with default ERSS settings like you said and it's the same result. What's your game settings? Game resolution, display resolution, full screen mode? FYI the ERSS-FG.dll+0x1434de call is sort of a catch-all render hook so it appearing in the log could mean anything.

Eyyup Sayli

I messaged you in discord. But for people maybe seeing this issue in the future: it was BC of Ray Tracing. Turning off ray tracing fixes the cinematic issue for me. And here was my spec and configs: Display & GPU: RTX 5090, NVIDIA driver 32.0.16.1047 (576.x branch) Native 3840×2160 @ 240Hz, 10-bit HDR-capable monitor Elden Ring graphics (from GraphicsConfig.xml): Screen mode: BORDERLESS Resolution-BorderlessScreenWidth: 3840 Resolution-BorderlessScreenHeight: 2160 Resolution-FullScreenWidth/Height: 3840×2160 QualitySetting: CUSTOM with everything maxed — TextureQuality MAX, Antialiasing HIGH, SSAO MAX, DepthOfField MAX, MotionBlur HIGH, ShadowQuality MAX, LightingQuality MAX, EffectsQuality MAX, ReflectionQuality MAX, WaterSurfaceQuality HIGH, ShadeQuality HIGH, VolumetricEffectQuality MAX, RaytracingQuality MAX, GIDataQuality HIGH, GrassQuality MAX Auto-detectBestRenderingSettings: OFF ERSS-FG config at time of crash: ScalingMode = "DLSS", DLSSMode = 5 (DLAA), DLSSPreset = 11 (Preset K) RemoveFPSLimit = true ← the trigger EnableFrameGen = false, FrameGenMode = 2 IsHDR = true, Force10Bit = false GIGlitchMitigation = 1 ReflexMode = 1 (also reproduces with 2) OverrideFullscreenState = false, OverrideRefreshRate = true bUseVSync = false

Giovanni Federici

I'm just trying to get this shit to work again since it stopped post 1.16.2

huutaiii

I "blamed" on NVIDIA drivers being at fault simply because that's what other users have told me. They said that a combination of reinstalling or rolling back drivers and resetting ER's profile using profile inspector solved the issue. And that warning message is exactly what it is: a warning - not an error, it does not affect framegen whatsoever. The fact that FSR-FG works proves it. AntiLag 2 is an AMD feature, an NVIDIA GPU not supporting it is perfectly normal. I do not know a definitive solution to DLSSG problem because it simply is not replicable. Being able to reproduce it is important for me to understand the problem. But whether it happens or not on a particular system is completely random as far as I know. I've tested the mod with multiple versions of the GPU drivers and DLSSG, unfortunately I did not run into the same issue. So for now I can only suggest these potential solutions that have been reported to me.

Carlton

Just got this mod today, I gotta say it's worth as much as any dlc! Im not even using the frame gen due to the ghosting and still it's a game changer!!!

Marcin Kalczyński

Hello i just downloaded newest version of the mod and after turning on frame gen my "home" menu doesnt work anymore, and the game seems much more lagy with FG on, any tips?

huutaiii

Can you double check that smooth motion has been turned off? Also if you’re running the game in full screen, please switch to borderless. full screen is generally less stable.

Marcin Kalczyński

After i disabled smooth motion everything works fine, thank you :D

Ibrahim Boumnijel

Hey ive been downloading the file using winrar, it used to work like 1 time but my frames were really bad so I decided to uninstall it and reinstall it again. And now everytime i download the file it says that the file has become corrupt and I cant use it anymore. What do I do?

huutaiii

Try 7zip or nanazip. It could also be that your winrar is not up to date so it might be worth checking if there’s a newer version as well.

Branden Korth

This works splendidly...however, I cannot get it to work alongside Convergence 3.0. I don't know how Convergence works. It runs it's own .bat file. Would you be able to take a look? *ReShade works **This comment from Reddit makes sense. Convergence uses ModEngine3. However, since your mod isn't simply a .dll file added to the mod folder, this suggestion doesn't work. "you have to edit the .me3 file in notepad++ or your text editor of choice, copy one of the existing [[native]] blocks, and change the name of the .dll to the one you're adding. just put the .dll file and any .ini paired with it in the "mod/dll" filepath inside the convergence folder, once you've confirmed that the name is correct in the me3 file."

Ibrahim Boumnijel

Ive been incredibly stupid, ive been typing the wrong password the entire time smh..

Ali Alhaddad

This is how you get it working with convergence: 1- go to "ConvergenceER\me3" 2- if you are not using seamless co-op, edit 'convergence.me3' with a text editor like Notepad++ and if you're using seamless edit 'convergence - seamless.me3' instead 3- This is where you can add more .dll mods so that me3 can run them alongside convergence. Add the following: [[natives]] path = './../mod/dll/ERSS-FG.dll' Have this line before the one for Erdtools, as I found out that loading ERSS later can delay it and make it not load correctly sometimes or even crash the game. Add it then save the file. 4- Place 'ERSS-FG.dll' and the 'ERSS2' folder in "ConvergenceER\mod\dll" Launch the mod normally either through the launcher or directly from the desired .me3 file. 5- Convergence will now work with ERSS. Enjoy! I hope my instructions were clear enough as I'm not the best at explaining things. EDIT: I read the rest of your comment afterwards and that advice from reddit is the same thing I just explained. I should have read the whole thing first lol. But I can confirm that is the way to do it if you have yet to try it yourself.

Branden Korth

I redid the instructions and it worked, however, I now get this message: "ReShade is present but ERSS failed to register as an addon". I click on "dismiss", but the message won't go away. Any suggestions?

huutaiii

Moving ERSSReshadeStub.addon to the Game folder should fix it. (or wherever Reshade was installed.)

Lucas Freitas

After enabling the mod and restarting the game, my screen starts flickering and I can no longer open the overlay by pressing the Home key. I'm using an RX 9060 XT, and I'm also using the Reforged mod. Is this a known issue, or is there a fix? *Also, does using Frame Generation with the FPS Limit left at Default cause any issues when playing Seamless Co-op?

huutaiii

Is AFMF is turned on in the driver settings? That might interfere with the mod. ERSS should be compatible with reforged though I’m not sure about the extra mods that come with it, I think they should be fine too. And using default fps limit should be fine for coop.

Lucas Freitas

Now everything is working perfectly. One more question: when using the Reforged mod, is it enough to put only the ERSS2 folder and ERSS-FG.dll inside the DLL folder? I don't need D3D12.dll or ERSSReShadeStub.addon, right?

huutaiii

Yes! Unless you install Reshade in the future, in that case ERSSReshadeStub.addon has to be in the Game folder. D3D12.dll is not needed when using Reforged.

david1214

Okay, I need help, I might be doing something wrong, my game's image is INCREDIBLY jittery at the point where it gave me severe motion sickness. I don't see any options for FSR 4, only 3 & 2 (even though I have an Rx 9060 xt) I am running the game on linux (Bazzite) using Proton GE-latest and two mods "Remove chromatic aberration" and "Elden Ring Reforged", i played around with the in-game options but nothing seems to make any difference at all, even using XeSS gives me the same result... It's rather unplayable for me when using this... :(

huutaiii

Do you have any mod that 'upgrades' FSR2/3 to FSR4 enabled? or any other graphics related mod? Also can you try Steam's official proton and proton experimental?

david1214

Oh hi, the jitter thingy was mostly my fault, ERR is very picky on how you load mods, I just had to move every mod file into it's own dll loader it comes with, but as for the FSR4 option not showing up, well... it still doesn't show up, using proton 11 and experimental didn't change anything regarding that, and no I don't have any mods other than Reforged and the chromatic removal thingy... And If you're wondering, yes, I did set up the FSR4 upgrade globally on my Bazzite install, it does work on other games, I'm just not seeing the FSR4 option on this mod lol

huutaiii

Yeah ERSS only shows officially supported versions. If the upgrade works then it’ll use FSR4 when you select any version

Anzor Vashaev

Low key im done, this fucking mod doesnt work, I wasted my fucking time, trying to make this fucking mod work, with reshade or without, its just doesnt work, its crashing or doing just nothing. So Thanks for the time waste amd this stupid ass shity ass mod

Mas

Windows is detecting this as "Trojan:Win32/Vigorf.A" as of 07.26.26 This applies to both the free version and this one Pl fix, awesome mod Adding both ER Game directory and ERSS-FG.dll to exclusion list did not help

huutaiii

Try turning off tamper protection, reboot, then add ER folder to the list again. Moving the zip file into the game folder then extracting it and turning off smartscreen app control might also help. This is not something that can be fixed by me otherwise.

Nikita Salin

Home button ot "T" (after installing addon) just doesn't do anything, nothing is showing up. Any suggestions please? I have a game version of 1.16.2, I wonder if that's still compatible I had ModLoader and ToggleAntiCheated installed, I deleted those files and left only game files. I put cmd /c start eldenring.exe & rem %command% to launch instruction. I was thinking about reinstalling the game but it might not help since only the game files are left. Hardware-accelerated GPU scheduling turned on Thanks in advance

huutaiii

Can you double check that windows defender hasn’t deleted anything? Best way to avoid that is adding the game’s folder to windows defender exclusion list, then move the .7z file to ELDEN RING\Game and extract it in place. Don’t skip any ERSS file, you’ll need all of them. Except the 7z it can be removed after.

Nikita Salin

It works bro, I can't believe it. Thank you, I wouldn't figure it out myself

Nikita Salin

The only downside that occured is that when you move a camera around fast with a mouse - a semi-transparent square moves into the centre of the screen from its edges - so you receive this semi-transparent square that is smaller than your screen until you stop moving around, then it becomes the size of the screen and stoppes being visible.

Rodrigo Rojas

Is there any way to make it compatible with Renodx?

Rodrigo Rojas

I have a question: I installed version 5, and while it works, there is some information about the mod appearing in white at the top of the screen that I can't get rid of—how do I remove it?

Martin

Just did a little test of v5.0 BETA. Seems all great so far. I certainly can notice the quality increase of the image using DLAA-K. Thanks for this mod, been using it since many versions ago. Not only did it allow an increase of frames with FG and image quaility improvements with DLSS etc. but for me it fixes the frame drops that occurred frequently in the DLC. UPDATE: Crashes to desktop during the new game intro video, and gave me a permanent black screen on the following cutscene after dying in the prologue (which persisted into the gameplay).

Just Joe

4.16.0 didn't have this problem. 4.13.0 though 4.15.2 did, then it was absent from the next one and came back in this one.

Mas

for me only v4.12 is working right now, but that one got all i need so its fine

Hasaka Rachel

On the 5.0 beta, when I enable any graphics setting except DLAA, the display shrinks to the top‑left corner. This doesn't happen with version 4.16.

Eyyup Sayli

Great! thank you for update. I will test this today.

huutaiii

Do you have any other graphics mod installed? Is your copy of the game up to date?

Hasaka Rachel

I'm only using ME3 for this mod, no other graphics mods. My game version is the latest 1.16.2.

Hasaka Rachel

"I set the in-game anti-aliasing to 'High' and that fixed the issue."

ComicMelon

Is it possible to integrate the vignette removal into the SR/FG mod itself? I for the life of me can't get it to load. So there's a shadowy box warping around edges when I turn the camera.

huutaiii

Of course! I’m a bit preoccupied with fixing some issues atm but will look into it once I’m done.

TheScoffe

Hello Huutaiii, the mod works great, just want to say that beforehand. But I can't see any option for enabling any version of FSR Upscaling, and the only frame generation I can choose is Intel XeSS FrameGen. I am using an RTX 2080 on the newest version of Elden Ring without any graphics mods (Optiscaler, reshade).

TheScoffe

Forgot to mention, i also can't seem to get the FPS Unlock working. Game is capped to 60 even with the unlock enabled and set to 120.

huutaiii

I haven't heard of an issue like this so might have to take a look at the logs. Have you joined my discord server? Would be faster to send the log files there. But if you prefer sharing them in other ways, that'd be good to me as well.

Rzeqetto

I have a problem with betra release, when unpacking i have notification that files are corrupted

huutaiii

Make sure you have the latest 7zip or winrar, the password is correct, and the folder that contains the 7z file is excluded from windows defender

Jorge A.A.

Been using this mod since the early releases and I can't imagine playing ER without it. It's impressive how huutaiii manages to inject DLSS, FG and Reflex (I have an Nvidia GPU) and make them work so well that the experience is practically indistinguishable from a game where these technologies are built in. I won't stop recommending huutaiii's work, even on Reddit, even if it gets me downvoted.

huutaiii

Thank you very much for your support and the kind words!

TheScoffe

Patreon autojoined for me, so i will be sure to send the log files, where can i find them?

huutaiii

The logs should be in an ERSS2 folder, or ERSS for the beta, where eldenring.exe is

Martin

ERSS 5.0 still needs the option for GI Glitch Mitigation.

huutaiii

can you send me the ERSS.log file in ERSS folder?

zzzira

the game crashes at launch, here are the logs (I followed all the instructions), I run the game through steam - for the sake of controler; and when I launch directly there is no Dlss option to be picked in the mods' menu [21-23-34][streamline][info][tid:21344][0s:180ms:370us]pluginManager.cpp:538[findPlugins] Looking for plugins in C:\Games\ELDEN RING\Game\ERSS\bin ... [21-23-34][streamline][info][tid:21344][0s:180ms:435us]pluginManager.cpp:1024[loadPlugins] eLoadDownloadedPlugins flag not passed to preferences, OTA'd plugins will not be loaded! [21-23-34][streamline][warn][tid:21344][0s:181ms:246us]pluginManager.cpp:893[mapPlugins] Failed to load plugin 'C:\Games\ELDEN RING\Game\ERSS\bin/sl.common.dll' - last error The operation completed successfully. [21-23-34][streamline][warn][tid:21344][0s:181ms:273us]pluginManager.cpp:893[mapPlugins] Failed to load plugin 'C:\Games\ELDEN RING\Game\ERSS\bin/sl.dlss.dll' - last error The operation completed successfully. [21-23-34][streamline][warn][tid:21344][0s:181ms:285us]pluginManager.cpp:893[mapPlugins] Failed to load plugin 'C:\Games\ELDEN RING\Game\ERSS\bin/sl.dlss_g.dll' - last error The operation completed successfully. [21-23-34][streamline][warn][tid:21344][0s:181ms:308us]pluginManager.cpp:893[mapPlugins] Failed to load plugin 'C:\Games\ELDEN RING\Game\ERSS\bin/sl.nis.dll' - last error The operation completed successfully. [21-23-34][streamline][warn][tid:21344][0s:181ms:321us]pluginManager.cpp:893[mapPlugins] Failed to load plugin 'C:\Games\ELDEN RING\Game\ERSS\bin/sl.pcl.dll' - last error The operation completed successfully. [21-23-34][streamline][warn][tid:21344][0s:181ms:330us]pluginManager.cpp:893[mapPlugins] Failed to load plugin 'C:\Games\ELDEN RING\Game\ERSS\bin/sl.reflex.dll' - last error The operation completed successfully. [21-23-35][streamline][error][tid:21344][0s:777ms:711us]sl.cpp:181[slValidateFeatureContext] 'kFeaturePCL' context is missing.

zzzira

also: 2026-08-08 21:42:38.160 - Initializing ERSS v5.0.0 2026-08-08 21:42:38.161 - Product name: ELDEN RING™ 2026-08-08 21:42:38.161 - Version: 2.6.1.0 2026-08-08 21:42:38.161 - Registering exception filter 2026-08-08 21:42:38.474 - Installing hooks 2026-08-08 21:42:38.653 - Installing overlay input hooks 2026-08-08 21:42:39.073 - Loading Streamline 2026-08-08 21:42:39.284 - [ERROR] slInit failed 8 2026-08-08 21:42:39.752 - Adapter: 0x10de 0x2f04 "NVIDIA GeForce RTX 5070" 2026-08-08 21:42:39.752 - Creating ID3D12Device proxy 2026-08-08 21:42:39.802 - Loading DLSS 2026-08-08 21:42:39.809 - [ERROR] Failed to initialize NGX bad00001 2026-08-08 21:42:39.809 - Upscale provider "DLSS" is not supported 2026-08-08 21:42:39.809 - Loading runtime library: FFX Runtime DX12 2026-08-08 21:42:39.811 - Upscale provider "FSR" is supported 2026-08-08 21:42:39.811 - Upscale provider "XeSS" is supported 2026-08-08 21:42:39.813 - Frame generation provider "DLSS-FG" is not supported 2026-08-08 21:42:39.814 - Frame generation provider "FSR-FG" is supported 2026-08-08 21:42:39.855 - Frame generation provider "XeSS-FG" is supported 2026-08-08 21:42:39.855 - [ERROR] [DXHooks\Private\Plugins\LatencyMarkerWrapper.cpp(76): DXHooks::RImplLatencyMarker::RImplLatencyMarker] Assertion failed (slIsFeatureLoaded(sl::kFeaturePCL, IsPCLLoaded) == sl::Result::eOk && IsPCLLoaded) 2026-08-08 21:42:39.855 - [ERROR] [DXHooks\Private\Plugins\LatencyMarkerWrapper.cpp(79): DXHooks::RImplLatencyMarker::RImplLatencyMarker] Assertion failed (SLState) 2026-08-08 21:42:39.856 - Latency reduction provider "Reflex" is not supported 2026-08-08 21:42:39.856 - Latency reduction provider "AntiLag2" is not supported 2026-08-08 21:42:39.904 - Latency reduction provider "XeLL" is supported 2026-08-08 21:42:39.904 - Installing game hooks 2026-08-08 21:42:40.656 - Checking directory "ERSS\\addons" for add-ons 2026-08-08 21:42:40.657 - Loading 0 add-on(s) 2026-08-08 21:42:40.664 - Creating ID3D12CommandQueue proxy 2026-08-08 21:42:40.665 - Creating ID3D12GraphicsCommandList proxy 2026-08-08 21:42:40.917 - Hooking WNDPROC 0 2026-08-08 21:42:40.917 - Creating IDXGISwapChain proxy 2026-08-08 21:42:40.921 - Initializing GUI overlay 2026-08-08 21:42:40.921 - Creating ImGui context 2026-08-08 21:42:40.923 - Creating overlay resources 2026-08-08 21:42:40.925 - Hooking WNDPROC 0 2026-08-08 21:42:42.828 - [ERROR] [DXHooks\Private\Plugins\LatencyMarkerWrapper.cpp(221): DXHooks::RImplLatencyMarker::ProcessWindowMessage] Assertion failed (slPCLGetState(state) == sl::Result::eOk) 2026-08-08 21:42:43.366 - [ERROR] Unhandled exception (0xc0000005) at ERSS.dll+0x1e319e [0] ERSS.dll+0x1e319e > AddonUninit+0x5cd9e [1] ERSS.dll+0x1e3148 > AddonUninit+0x5cd48 [2] ERSS.dll+0x1e391f > AddonUninit+0x5d51f [3] ERSS.dll+0x21f90e > AddonUninit+0x9950e [4] ERSS.dll+0x216685 > AddonUninit+0x90285 [5] eldenring.exe+0x1e9d96c > Scaleform::Render::Matrix2x4::GetMaxScale+0xc14d3c [6] eldenring.exe+0x1e979e8 > Scaleform::Render::Matrix2x4::GetMaxScale+0xc0edb8 [7] eldenring.exe+0x1afad86 > Scaleform::Render::Matrix2x4::GetMaxScale+0x872156 [8] eldenring.exe+0x19ea828 > Scaleform::Render::Matrix2x4::GetMaxScale+0x761bf8 [9] eldenring.exe+0x1af331c > Scaleform::Render::Matrix2x4::GetMaxScale+0x86a6ec [10] eldenring.exe+0xb18d91 > Scaleform::Render::Matrix4x4::SetIdentity+0x95f191 [11] eldenring.exe+0xb15143 > Scaleform::Render::Matrix4x4::SetIdentity+0x95b543 [12] eldenring.exe+0x26d5555 > AK::WriteBytesCount::WriteBytes+0x2f45a5 [13] eldenring.exe+0x26d5860 > AK::WriteBytesCount::WriteBytes+0x2f48b0 [14] eldenring.exe+0x268c8f2 > AK::WriteBytesCount::WriteBytes+0x2ab942 [15] eldenring.exe+0x26553ae > AK::WriteBytesCount::WriteBytes+0x2743fe [16] eldenring.exe+0xeb21f4 > Scaleform::Render::Matrix2x4::TransformByInverse+0x12db14 [17] eldenring.exe+0xdea6a6 > Scaleform::Render::Matrix2x4::TransformByInverse+0x65fc6 [18] eldenring.exe+0xc8ffe4 > Scaleform::Render::Matrix4x4::SetIdentity+0xad63e4 [19] eldenring.exe+0xc9031e > Scaleform::Render::Matrix4x4::SetIdentity+0xad671e [20] eldenring.exe+0x24fb87b > AK::WriteBytesCount::WriteBytes+0x11a8cb [21] KERNEL32.DLL+0x2ccb7 > BaseThreadInitThunk+0x17 [22] ntdll.dll+0xaad6c > RtlUserThreadStart+0x2c

huutaiii

Check if any dll file is missing from Game/ERSS/bin, there should be 15

zzzira

nothing missing, the game folder was added to the whitelist; ERSS-FG-v4 release still works well though, only v5 doesnt

huutaiii

It's reporting that the DLLs could not be loaded. Do you have anything that would move the files around? any other mods? Can you show a screenshot of the bin folder with the full address bar?

zzzira

no difference

zzzira

okay it was my dumb nvdia drivers, not updated, stuck at download, now the game launches in steam but still no dlss to pick

zzzira

[2026-08-08 23:24:43] [NGXSafeInitializeLog:141] App logging hooks successfully initialized [2026-08-08 23:24:43] [NGXLoadLibrary:326] error: failed to load NGXCore: 126 (C:\Games\ELDEN RING\Game\_nvngx.dll) [2026-08-08 23:24:43] [NGXLoadLibrary:326] error: failed to load NGXCore: 126 (C:\Games\ELDEN RING\Game\nvngx.dll) [2026-08-08 23:24:43] [NGXGetPathUsingQAI:147] Attempting to read from Parameters\NGXCore\NGXPath [2026-08-08 23:24:43] [NGXGetPathUsingQAI:171] Path to driverStore found using QAI: C:\WINDOWS\System32\DriverStore\FileRepository\nvmdi.inf_amd64_d9379a506a4c3691 [2026-08-08 23:24:43] [NGXLoadLibrary:326] error: failed to load NGXCore: 0 (C:\WINDOWS\System32\DriverStore\FileRepository\nvmdi.inf_amd64_d9379a506a4c3691\_nvngx.dll) [2026-08-08 23:24:43] [NGXLoadCoreLibrary:284] warning: failed to load C:\WINDOWS\System32\DriverStore\FileRepository\nvmdi.inf_amd64_d9379a506a4c3691\_nvngx.dll [2026-08-08 23:24:43] [NGXLoadLibrary:326] error: failed to load NGXCore: 0 (C:\WINDOWS\System32\DriverStore\FileRepository\nvmdi.inf_amd64_d9379a506a4c3691\nvngx.dll) [2026-08-08 23:24:43] [NGXLoadCoreLibrary:284] warning: failed to load C:\WINDOWS\System32\DriverStore\FileRepository\nvmdi.inf_amd64_d9379a506a4c3691\nvngx.dll [2026-08-08 23:24:43] [NGXLoadCoreLibrary:295] error: failed to load nvngx

huutaiii

I can see your copy of the game is pirated, which could be what's causing the problem. Try rebooting your PC, if that doesn't work there's no more I can do.

zzzira

okay, thanks, is there a way to run dlss 4.5 (not 4.0) on ERSS-FG-v4.16.1 release? by replacing some file or something?

Deny S

WACATAC trojan ... wtf

huutaiii

The virus (trojan, worm, whatever you call them) reports are false positive and have been around for a long time, and it affects mods from other authors as well. Read my notes above attachments to work around Windows defender deleting the files.

Carlton

The new version crashes when I turn on Xefg. The game wouldn't even load with Map for goblins dll and talisman effects mods were installed. I went back to Optiscaler for the time being

Carlton

I installed the new version and the game wouldn't load. I removed expanded talisman mod and map for goblins dll mod and it loaded. I activated Xefg and the game crashed.

Kyler Parson

Works great, just wish it supported RenoDX addon. Also, I had issues with DLSS-FG not working. But I fixed it by adding the game .exe in the old Nvidia control panel under Manage 3D Settings > Program Settings. Then selecting the restore button for that .exe. Not sure exactly what setting it was that stopped it from working, maybe low latency mode?

Sakkyubass

Hi, mod is working fine so far, but I keep crashing at the same exact spot in Academy Crystal Cave, just after the wooden door. Event viewer says it's ERSS.dll what's causing the crash, and after disabling HDR through the mod it worked just fine

huutaiii

Thanks for the report! I was looking into a similar issue yesterday so hopefully this will have already been fixed for next patch.

omgTT

Oh my god, thank you for preventing Elden Ring from focus stealing, this is incredible, I've been waiting for mod like this for twu years...

Stephan Mason

Great mod, but I cannot use Xefg without crashing. I'm using mod engine 3 and when I set optiscaler to use DLSS FG inputs, it crashes when I restart. Am I suppose to do something with the 2 me3 profiles included in the mod?

eli

Is it possible the ER Reforged works somehow with FG 2x? I want to keep my base fps 60 like required, but generate the other 60 for 120fps total.

Frank

I can't extract the file when I try to it says unexpected error the extraction was not completed

hsapin

Weird noise when using preset M with the latest version.

Sebastián Rathmann

Hi! I think I found a reproducible HDR/color issue in ERSS v5 when using upscaling. DLAA looks correct, but DLSS Quality/Performance lose a noticeable amount of color/saturation. The same issue also happens with FSR and XeSS, so it doesn’t seem to be specific to DLSS. After tracing the rendering path with a ReShade add-on, I found that the correct full-resolution R11G11B10_FLOAT image does exist after reconstruction, and its color matches DLAA much better. However, later in the pipeline, the BlendUI pass (HDRScene / t0) appears to receive a different resource when upscaling is active. So the problem seems to happen after reconstruction, before/finally at the HDR/UI composition stage, rather than inside the upscaler itself. I also confirmed that this is separate from the Neural Rendering Color Strength issue. Setting Color Strength to 0 fixes the strong NR desaturation, but the remaining DLSS/FSR/XeSS color loss is still there. If useful, I can provide ReShade logs, shader hashes, and the resource/format observations I collected.

Sakkyubass

Hi, just wanted to let you know that I found another crashing spot. Shortly after entering Raya Lucaria Academy, in the cemetery area after a bridge. This time it crashed if I had FSR active (quality mode, if it makes any difference), and having HDR on also made it stuttery, so I had to disable both. Glad to hear you're working on fixes, this mod is a god send and I wouldn't be able to play without it.

Christophe Dislaire

i get this weird issue where the screen flashes in so many colors randomly after loading. changing the resolution okez two three times seems to fix the issue, and it appears completely randomly... if im correct, this happens only with mod engine (2), if i launch the game without mod engine, i never have the issue. my only mods are the widescreen ui aspect ratio mod for menus and the recommended distance rendering mode

Shish0u

"The file is corrupt" why cant i unzip it?

Eric Irwin

is there any way to use this alongside mods like "RadialMenu" or "Spell Wheel?" your mod is amazing but these mods are major game changers

Eric Irwin

need the password it's huutaiii

Mortius

Amazing work, are you planning to add also support for dlss 5 in the future?

Toncey Stevenson

With fps unlock toggled the overlay will only allow me to raise the cap to 75, nvm this isn't an issue in windowed fullscreen

Zutamy

Thank you!! Crazy work

ImplodingSun

v5.0.1 causes frequent infinite loading screens on Linux with Elden Ring Reforged. Edit: All offline. Same thing on v5.0.0.

Nicholas

Today's patch (1.17.1) appears to have broken this.

Zefrose

Can confirm today's patch broke this.

Frank

broke it how? it works for me

하 후

game keeps crashing.

Nicholas

Correcting my own comment: I installed this wrong. Windows Defender quarantined the file and I didn't notice. Works perfectly with 1.17.1. Apologies!

Gabriel

I followed the steps perfectly, but when I launch the game, I get an error saying that ERSS.DLL is either not designed to run on Windows or contains an error. Help pls.

RoyOP

This seems to cause the spell wheel mod to stop working, any chance this can be fixed? i need this mod for convergence. All i was able to gather from the logs is this : WARN hudhook::hooks::dx12: Couldn't find command queue pointer in swap chain struct (512 out of 512 pointers were readable)

SardineCat

Elden Mod Loader appears to no longer load when using 5.0.1 When I removed DXGI.dll and launched the game without it, elden mod loader's dinput8.dll loaded fine.

song minghui

I’m using this SE mod alongside RenoDX DLSS 5 and ReShade. Everything works perfectly when there’s no scene loading. However, random crashes occur whenever I teleport and trigger a load screen. I haven’t pinpointed the culprit, but I suspect this specific combination is the cause — I’ve not encountered this issue in other games. As you can see, I’ve supported your work. Could you look into fixing these random DLSS crashes? Also, since you’re developing this DLSS mod, would you consider adding support for DLSS NR

Jake West

I have a similar setup. I think running them together can crash when loading, not all the time but like random chance. Using optiscaler fixes all of it if you rename reshade to Reshade64.dll and then go to the optiscaler ini and set the reshade path to true. Also, you can use dlss 5 for free with optiscaler this way, so everything runs in tandem! hope this helps

Frank

can confirm that intel XeSS- FG is still not working on the latest version (5.1.0)

하 후

What's the difference between ERSS-FG v4.16.2 vs ERSS-v5.1.0 ?

Felipe

I started using this yesterday, but I might be doing something wrong because I don't get any performance boost with this... I can see the mod overlay options and I can see that it affects the game visually by changing some options, but I don't get the fps boost I'm able to get on other games like Cyberounk and RDR2 with their native AMD FSR options. Can I get some help please? My gpu is an AMD RX 6700 XT and I'm selecting AMD FSR in the mod options. It doesn't make any difference if I set the quality mode to balanced or even ultra performance, it doesn't give me not even 1 extra fps. Am I just getting this wrong, or expecting too much from this? On Cyberpunk and RDR2 I get fps boosts (without frame generation) just by enabling AMD FSR. Thanks in advance.

zhao fuchang

how to use reshade with dlss5 nr on v5.1.0 version ?i have try many times ,but useless

Alexei Rimski

I've used other versions of this mod before and playing at 4k was incredible but after installing the latest version my game runs in slow motion help 😭😭😭 Ps. Love the work you do 10/10

Felipe

I'm having an issue where I can't fast travel when AMD FSR is enabled... I open the map and select any site of grave and the game just freezes... Steam also stops responding... I have to right-click the steam systray icon and close it. Anyone else having this?

Aaron Firth (edited)

Comment edits

2026-10-13 17:00 Hello, I've recently downloaded the mod for my desktop and it's working fantastic. However I'm trying to get it running on my Xbox ally X for fsr and fsr-fg and its working, but I have an issue where when I'm warping or have a loading screen, there's a 50/50 chance of the game loading normally, or loading into erratic strobing white with lots of artifacting. Unsure if it's an issue with my installation or something I can fix in the settings. Any help would be much appreciated. I'll try doing a fresh reshade and mod installation too.
2026-10-12 16:57 Hello, I've recently downloaded the mod for my desktop and it's working fantastic. However I'm trying to get it running on my Xbox ally X for fsr and fsr-fg and its working, but I have an issue where when I'm warping or have a loading screen, there's a 50/50 chance of the game loading normally, or loading into erratic strobing white with lots of artifacting. Unsure if it's an issue with my installation or something I can fix in the settings. Any help would be much appreciated. I'll try doing a fresh reshade and mod installation too. -- a fresh installation did not fix the issue and the issue is isolated to fsr upscaling. If I disable upscaling, all other features like framegen and antilag work flawlessly.

Hello, I've recently downloaded the mod for my desktop and it's working fantastic. However I'm trying to get it running on my Xbox ally X for fsr and fsr-fg and its working, but I have an issue where when I'm warping or have a loading screen, there's a 50/50 chance of the game loading normally, or loading into erratic strobing white with lots of artifacting. Unsure if it's an issue with my installation or something I can fix in the settings. Any help would be much appreciated. I'll try doing a fresh reshade and mod installation too. -- a fresh installation did not fix the issue and the issue is isolated to fsr upscaling. If I disable upscaling, all other features like framegen and antilag work flawlessly.

Derick Boe

The only thing I can think of adding is an FOV adjustment.

heyimapatron

Okay so with the new FSR 4.1 lite rolling out to XBOX Ally X & X20, I assume it's best to run the free version to inject FSR 3.1, then activate "FSR Upscaling" in the Armoury Crate gamebar, to switch on FSR 4.1? Using paid version on my intel handheld.

James

Really not a fan of ME3, ME2 just works

Amro

What preset is used in this mod for DLSS Frame Generation? A, B or C?

m a

Hi, ERSS (v4.16.2 and also v6.0) gives me a black screen on launch with Elden Ring 1.17.2 (exe 2.7.2.0). The game is running (F1 changes the cursor), but no image is displayed. The ERSS log shows no errors except "[ERROR] End of process memory", and it detects my RTX 5070 Ti and DLSS-G as supported. Setup: RTX 5070 Ti, Ryzen 7 9700X, Windows 11, 3440x1440 Samsung ultrawide 165Hz, Easy Anti-Cheat disabled, launched via me3 / eldenring.exe. Renaming D3D12.dll makes the game work normally. Any idea what could cause this? Thanks!