Home Creators Posts Import Register Favorites Logout
haven't archived this post yet. have a subscription? use the importer!

Content

Here are the pieces from the demo I did yesterday during the live broadcast. From right to left: -Acetone vapour smoothing, about 3.5 hours. -Acetone brush on smoothing. -XTC-3D applied with a spounge. -XTC-3D with Aluminium powder in it, I've polished it back a bit, you can just about see the metal. I think the XTC-3D would work better with more coats, probably quite a few more to get the Aluminium powder to polish back to an actual metal-look. Overall the Aceton vapour smoothing is the smoothest, although for this project that isn't necessarily what we want as a finished result.

Files

Previews only

Comments

Anonymous

You talked about the XTC-3D probably feeling smoother than it looks because it's a clear epoxy. Is that the case now that its dry? Does the plain epoxy without metal still need more than one coat to feel smooth?

XRobots

I'd say you need more than one coat of XTC-3D to get it totally smooth, I can still feel the lines.

Anonymous

I've been wondering about the XTC-3D for a while now ever since you mentioned it way back when. We have a local supplier but I haven't purchased it yet. Was waiting to see how good it was. I have the powder. How much should a person use?

Anonymous

Forgot to ask...before I was able to find your live broadcast "after the fact" but I have not been able to find them. Is there a link? Thanks.

Anonymous

Found the link James. I just checked my inbox. Is there a link for the one before this one? That one I really can't find.

Anonymous

Questions after watching. You were talking about using ABS juice to stick the Ninjaflex skirt on the bed. Does ABS juice work with Ninjaflex? Can you chemically weld Ninjaflex with ABS juice? -- Laughed at your comment about the hands looking stupid. I always thought they were a little large but I had faith you would figure it out. You mentioned "skinning". Could you explain what that means? -- Your Xenomorph feet look pretty good. I thought you were going to hinge the toes they contact the ground. How does it look if they are floating above the ground? -- acetone smoothing question: Once you brush on acetone, how much stronger is the piece? I noticed how easily you pulled apart the one grenade textured handle that you had the fan on when you printed. How strong would it have been if you brushed it? Would you still be able to pull it apart? Once you epoxy smooth, if it separated, would you be able to use acetone to clean up the split and have it fixed? Those sponge brushes are only a dollar and acetone eats the glue that holds them together so you may want to just trash them after use. Acetone in larger containers (1 gallon) can also be purchased at ladies salons. Enjoyed the broadcast.

XRobots

YEs - do you have access to my private subreddit on Reddit.com (send me your username). Or you can just scroll down my Patreon wall.

XRobots

I just dumped in a bit of powder and mixed it in until it looks like I could spread it on easily. Probably 50/50 by weight with the resin.

XRobots

Hi Scott, no it was an ABS skirt, Ninajflex stick to the bed without any help. Could be worth trying a Ninjaflex skirt although the default is extruder 1 so it might take some hacking. Skinning of Hulkbuster is basically sheet material stuck to the frame. Acetone definitely makes the pieces stronger, I haven't tested it to quantify it though. Maybe I should try a video on that. The grenade parts were printed with different setting as I mentioned, I I stuck the broken on back together with Acetone and smoothed it I think it would be perfectly good. Acetone pretty much fixes everything ;-) Yes I think you could repair ABS parts with Expoxy on - the split parts would be bare ABS so Acetone should work ok.