Home Creators Posts Import Register Favorites Logout
haven't archived this post yet. have a subscription? use the importer!

Content

Going on from yesterday's post, here's the latest on miniDog.

I started by shrinking everything in - making smaller feet, reducing the length of the mid-leg section, and moving the hips closer together in both directions.  However it ended up looking very front heavy (smaller image inset). There are unfortunately some clearance issues with putting the third/hip leg axis mechanism 'behind' the leg, so we end up with both mechanisms sticking out in front.  This will likely cause inherent issues with making it balanced and stable. 

Then it struck me, that since I'm trying to make my life easier with this design anyway, it would be far more beneficial to make the robot as symmetric and balanced as possible to start with, and I could also solve my clearance issues by just turning one half of the robot around. 

It's lost some of its character this way - it looks more like an industrial machine than a dog, but it will allow an easier route to stability due to it being symmetrical.  I'll also probably be able to do some initial testing without having calculated and coded the inverse-kinematic model since I'll be able to easily make symmetrical moves on the back/front and left/right sides by just moving the joints to exactly the same positions - and it'll still  inherently remain as balanced as possible.

There will likely be a battery and power regulation/distribution in each end, and electronics in the middle. Later on I plan to install more sensors on top and so on, hence the 'frame' sections for mounting.

replacement parts are printing now...


Files

Previews only

Comments

Anonymous

If you want the look to become more animal like you could maybe add some kind of face and tail section

John N Nelson

OMG - It's become a "Franken-Dog". I'm just kidding. It looks like you've come up with a good but novel solution.

Dan Kramer

It looks like a cute robot crab.

bruceneely

not sure you can call it a dog anymore, crab is a better description.

bruceneely

it would be more stable, as you could always have at least 4 legs on the ground

bruceneely

sounds like a plan, I'm sure you won't get much speed out of 6 legs though... buut a robot crab is cool

Anonymous

Create a mirror of the back section, than copy the leg moving them forward in the correct position. In this way the over all length should be shorter still having the normal dog leg configuration.

XRobots

There's an issue with clearance if the legs are mounted the other way around on the 'hip' mechanism unfortunately. Also that way it still won't be balanced well which will make my life harder when I come to make it balance on two legs.