Home Creators Posts Import Register Favorites Logout
haven't archived this post yet. have a subscription? use the importer!

Content

Here's miniDog #7 early for Patrons. This one goes out publicly next Tuesday 21st.

I'm planning a part 8 for this one, but so far I don't think it's going to do anything much more impressive - I'm feeling that I'm pushing the speed and agility of the servos I've used here. Also, I don't believe compliance will work to aid with stability due to the top speed it can actually move at - either my springs are too tight to do anything or loose enough that it because unpredictable - we'd really need to hit the ground harder & faster with the feet for this to become viable.

For the price of the servo upgrades I can buy bigger brushless motors that would be more suitable to build back-drivable gearboxes again, which will also be a lot more agile, so that is my current thought process. That robot would also be larger, so we'd be looking at an openDog V2 - ultimately this whole process is R&D for something more 'industrial' sized.

Files

Previews only

Mini Robot Dog #7 - Dynamic Walking

This time it's time to make my miniDog robot dog walk. I'm testing both statically stable and dynamically stable gaits using the IMU to balance. This seems to work ok, but I think we're on the edge of it working with these servos. I've decided to put my Robot Dog, openDog, on hold for now and build a smaller prototype robot dog for testing to see if I can actually make it walk. At some point I'll return to openDog, but I believe my smaller, compliant design will provide an easier route to stability. Affiliate links - I will get some money of you use them to sign up or buy something: *************************** Matterhackers 3D printing supplies: http://www.matterhackers.com?aff=7500 Music for your YouTube videos: http://share.epidemicsound.com/xrobots Amazon US: https://www.amazon.com/?tag=xrobotsuk-20 Amazon UK: https://www.amazon.co.uk/?tag=xrobotsuk-21 Amazon FR France: https://www.amazon.fr/?tag=xrobotsuk0c-21 Amazon DE Germany: https://www.amazon.de/?tag=xrobotsuk02-21 Amazon ES Spain: https://www.amazon.es/?tag=xrobotsuk07-21 Amazon IT Italy: https://www.amazon.it/?tag=xrobotsuk08-21 *************************** You can also support me on Patreon or buy my Merchandise: *************************** Patreon: https://www.patreon.com/xrobots Merchandise: https://teespring.com/stores/james-bruton *************************** Other socials: *************************** Instagram: https://www.instagram.com/xrobotsuk Facebook: https://www.facebook.com/xrobotsuk/ Twitter: https://twitter.com/xrobotsuk *************************** CAD and Code for my projects: https://github.com/XRobots Huge thanks to my Patrons, without whom my standard of living would drastically decline. Like, inside out-Farm Foods bag decline. Plus a very special shoutout to Lulzbot, Inc who keep me in LulzBot 3D printers and support me via Patreon. HARDWARE/SOFTWARE Below you can also find a lot of the typical tools, equipment and supplies used in my projects: Lulzbot 3D Printers: http://bit.ly/2Sj6nil Lincoln Electric Welder: https://bit.ly/2Rqhqos CNC Router: https://bit.ly/2QdsNjt Ryobi Tools: http://bit.ly/2RhArcD Axminster Micro Lathe: http://bit.ly/2Sj6eeN 3D Printer Filament: http://bit.ly/2PdcdUu Soldering Iron: http://bit.ly/2DrNWDR Vectric CNC Software: http://bit.ly/2zxpZqv Why not join my community, who are mostly made up of actual geniuses. There’s a Facebook group and everything: https://www.facebook.com/groups/287089964833488/ XROBOTS Former toy designer, current YouTube maker and general robotics, electrical and mechanical engineer, I’m a fan of doing it yourself and innovation by trial and error. My channel is where I share some of my useful and not-so-useful inventions, designs and maker advice. Iron Man is my go-to cosplay, and 3D printing can solve most issues - broken bolts, missing parts, world hunger, you name it. XRobots is the community around my content where you can get in touch, share tips and advice, and more build FAQs, schematics and designs are also available.

Comments

Andrew Hoadley

Nice work. How are you feeling about the code after this update? Just thinking that every dog that you make needs 4 legs, each leg needs 3 joints, each joint needs a positioning system, compliance, (even if the compliance factor is zero) a kinematic model, an interpolation system, implementation of gaits. Seems like there might be room for abstraction and standardisation?

XRobots

I'm feeling like I'll just use the same code on any future models, to start with at least. The compliance would be different on a brushless motor system (like my test dogs), but the kinematic model will be almost identical - with just a few #defines changed for the new dimensions etc. Largely things will be in the same place in the code structure though, so I can always come back to this dog if I make any major breakthroughs too.

Andrew Hoadley

If I was to take a shot at compartmentalising the code is that something that you're interested in? Remember open source isn't just about you giving to the community, it's about the community giving back to you. If you liked it you could recreate it in an episode so your viewers would be able to follow the changes.

XRobots

I'd really like to make sure I fully understand it and can continue to develop it for now. Feel free to fork it though and maybe I can put a link in somewhere?

Pete Mertz

Always impressed! Thanks James, this looks too cool :)

Cody Blotske

I'd like to see the load sensors on a dog. I know it wasn't fast enough for a 10 mph self balancing wheeled robot but the shower speed of a walking dog seems doable.

Andrew Hoadley

Thanks James. I think you may be surprised about how much easier it would be to develop with after the change. The code on github is for episode 5, is the episode 7 code available anywhere?

XRobots

It would be down the speed of the feet hitting the ground so they comply properly. I'll be doing something active like this in the next version, but using the actual motor and gearbox as the sensor.

XRobots

I'll be putting out the 'final' code with part 7, but it's actually got the tweaks in from part 8. That'll all be done by the time this goes out publicly on Tuesday.

Anonymous

You always manage to stop it right before I want to yell at my screen that the little fella is gonna fall off the table. Especially with the larger eyes he's a real champ. I root for him and his journey.

Anonymous

I really want my own miniDog for a few projects so I've been planning on building my own, although I wanted a smaller design so I was planning on reducing the size to about 75% or 66% and removing the gearing (increasing the speed). Do any problems come to mind that this may cause? And would this help with the limitations brought on by the lack of speed of the motors?

Neil Devonshire

He's looking very good and stable, even without the IMU, it's good to see the full journey and helps people understand all the development points, including what doesn't work so well. Could you use a lightweight Brushless motor directly with each joint, as they would be fast, powerful and compatible with the position control systems of OpenDog. The Honda Asimo has fast direct drive brushless joints I believe, and although bespoke made, proves the physics behind it all. Looking forward to the next video.

XRobots

Yes it sounds like it would help with making it faster, but you'll really have to watch out for the servo power - how about just changing the gear ratio?

XRobots

I think brushless motors would still need some reduction before driving the joint, but this is essentially the plan for openDog V2 - 'quasi-direct drive'.

Neil Devonshire

That's a cool sounding drive, could he be called Quasi-Dog 😁?

Neil Devonshire

They must use planetary gears or something similar for low profile, high torque and little backlash, I think you can control the backlash with planetary gears by moving the outer gears closer to the centre gear, so this may reduce that issue too. My MGF motor thingy has planetary gears that share the load.

Anonymous

Speed was the only problem with the compliance, right? That's why you had zip ties instead of springs?

Anonymous

Are there other problems with this design? Or was the motors the only thing?

XRobots

Yes, so compliance 'worked', but in order to actually stretch the springs when it was moving meant they needed to be so loose that it was unpredictable, so so tight they didn't do anything. I think they need to be tight so it's predictable, but fast enough so stretch them momentarily when the feet hit the ground.

XRobots

II think it's as good as it gets for something with geared servos like this. If/when I come back to it I'll just be upgrading the servos and that's about it (as far as I know without doing it of course). The foot profile is due to change in part 8 for better traction, but that's the only change.

Neil Devonshire

What belts do you use? I use HTD 5mm pitch, 15mm width

Neil Devonshire

They are silly strong, I use them as the drive on my mill conversion with the ODrive motors and have jammed the table into the back of the machine during testing where I had to use a hammer and chisel on the main pulley Teeth to free the leadscrew, the belts were unaffected and everything survived very well. Not my usual practice, but wanted to make sure it wouldn't brake if it all crashed for some reason.

Anonymous

Thank you for clearing that up. That's why I thought reducing the size of the unit as a whole would help. Reduces the need for better motors. Thank you for all your work on this, a compliant quadruped just wouldn't be accessible to me and many others without a huge time investment.

Scott Cress

James, looking at Mini Dog, the mechanical design may be causing some issues for your gate. I know you're planning on Open Dog V2. When building the next one. Consider placing the "thighs" on the outside of the leg assembl and main body frame. Still keep the strike point in line with the hip point, don't change that. When the Minidog lifted it's leg it has to shift it's weight to allow the legs to pull up inside the frame. This reduces range of motion and causes the frame to "sway" up and down with each step. Causing instability. Most biological walking doesn't allow this and your mechanical stability and speed may be able to improve if you can follow the biological lead.

XRobots

There's clearance for thighs to come right up parallel with the body in V2 - if the servos can move that far. It may be the motor in the leg that's causing it to sawy as the leg has quite a bit of inertia. I'll be keeping all my motors in the hips in openDogV2 - but the thigh will probably be on the outside as you suggest so it can do a complete 360 if needed.