Home Creators Posts Import Register Favorites Logout

Content

This didn't last long. The display cable failed where it goes through the hinge after using the meter roughly 50 times.

On a plus note, it seems decent inside and is serviceable.

https://youtu.be/CuMQ4eyNL64

Files

Repairing the new Aneng 623 meter's display

I was just starting to take a shine to this meter when it suddenly stopped working, with the display becoming intermittent depending on the hinge position. I'm wondering if mine had the ribbon cable snagged in the hinge or a mounting post during manufacture, or if this is a common weakness. If you pause the video just as I take the second part of the case off, you can see the complex way the ribbon cable is first zig-zag folded to get to the hinge, and then has a spiral loop inside the hinge to make it tubular and give it rotary movement. For the fix I chose to replace the full ribbon with eight thin wires, but note that there is a design inconsistency and if you also use the eight wires going between identically labelled contacts, the display backlight will swap the red and green modes. The two wires to swap on the display PCB are PT2.2 and PT2.3. It may be easier to keep the original ribbon cable and just thread through a single new wire if only one ribbon cable track has broken. While it's nice that the wiring interconnection is serviceable, it would be annoying if this was a common fault in these meters. let me know if you've had a similar problem. If you enjoy my videos then the easiest way to support the channel is to subscribe for more good video content. But if you would like to contribute a dollar or two for coffee, cookies and gadgets to take apart, you can do so by supporting me on Patreon. I release videos without adverts for critique and feedback on Patreon as soon as they have been made. I also do Patreon live streams, which are much more relaxed and chatty than the busy public ones. https://www.patreon.com/bigclive Alternatively, for a single coffee contribution you can use PayPal:- https://www.paypal.com/paypalme/bigclive #ElectronicsCreators

Comments

Mike Hughes

I did consider buying one of those, after seeing yours, but in the end I went for the UNI-t ut191t pro for a similar price. I am kind of glad, now that you've highlighted this possible problem. Hopefully yours was just a one off, and is not an inherent fault, as some people might not have the desire to try and repair one.

Mark Gray

This type of failure seems very common. Even Apple got caught up in it after using a flex cable that was a few mm too short. I’ve lost two travel alarm clocks to similar faults (don’t have the skills to fix them unfortunately).

Mike Page

It looks like the fracture was caused during manual assembly. If they want to continue using the FFC they should pre-form the cable in a jig to easily fit inside the hinge without fracturing. It's fine to put permanent bends in an FFC as long as the bend is not stressed. You can see the 45 degree bend they have which won't have fractures.

Brian Deschene

Ah! A wonderful traditional style BC video where it is not rushed (power tools), calm (no fast talk), and technically enlightening. Just the sort of content that’s gotten the channel and deserving creator the following it has achieved. I am sorry you had problems with your equipment but so thankful for the video and how you make your videos in general. So: Thank you.

Gadgetman

That’s the trouble with folding displays. They are designed to fail. Glad you fixed it.

Dave Frederick AKA @amorphuc

Wow. Nice repair Big Clive. What a hassle though. I bet that took a minute! Dang. Where would you even find a replacement ribbon cable?

Ymir the Frost Giant

Given the good quality of the rest of its innards, the way that cable has been scrunched in looks like it should have been done neatly. If you've had this less than a year, Aneng might be glad to know about this, as it might help them to get future units done properly and avoid multiple returns under guarantee and , more importantly, a compromised reputation for their products. In an automotive garage these would get far harsher treatment than you've given yours. It got me wondering how laptop makers avoid this issue, where failures would be vastly more problematic - not having one handy to tear apart, my guess is that if they do use ribbon cable I can only think that it being actually folded when the lid is opened/closed is avoided by having it flex in a curve instead, possibly around a hinge pin with a relatively large diameter.

richard ockman

One good thing about the repair is can redone again if needed.

Mike Page

They look nice. Uni-T are clearly squaring off against Fluke's budget Amprobe brand.

Mike Page

We live in a world of slave labour - sadly. Some metaphorical, some literal.

Mike Hughes

I am really pleased with it so far.

Ewen McNeill

For future reference, it’s pretty easy to buy low connnection count (eg 8) flat flex cables in various short lengths. As an example they should be findable on AliExpress, and/or a factory that will make them to length on request. Generally they’re fairly inexpensive cables, as they’re extremely commonly used these days. With those through hole vias next to the flat flex connectors, and a decent relief I the hinge, that unit looks more repairable than most. From the way the flat flex was scrunched up, I suspect it was being repeatedly sharply folded on an edge to produce that break — because of a badly routed cable, due to it being too long, as they used a common flat flex cable length instead of a custom length. Ewen

Big Clive

The Uni-T meters do seem quite good quality.

Roy Sigurd Karlsbakk

I've never seen a ribbon cable that mangled in an official product - insane! Seems to me whoever assembled that thing must have had a very bad day! It could light the LED, fine, but not measure across it, not so fine… When you say "knif", keep in mind that the f was (and still is, in modern Icelandic) pronunced like a v. In scandinavian languages, we've just changed the spelling to represent this, to "kniv", so [kni:v] is the correct pronunciation :) And btw, you should get yourself one of those silicone mats to put your screws and whatnot on. Some of them even come with magnets and pockets.

Michael Baumann

TBH, even amazon has them (having just ordered some 300mm 4pin for a fridge monitor I'm building. )

adrian

I'm not sure it's too long. It needs careful folding to curl smoothly around the hinge and approach the connector clamps from the proper direction. Seems like the factory worker just scrunched it in instead of doing the proper folds and this is the result.

Big Clive

That's good to know. It looks like a standard thing.

Gordo

That was a good job Clive.. I used to fix multimeters for a living and I think that's the first time I've ever seen pads beside ribbon cable connectors. We used to use wire-wrap wire to replace some or all of the broken conductors but had to solder to the pcb or back of the socket.

Andrew Ellis

I like the Aneng 613. Not hinged, so great for the bench. Best of all, it's automatic. You can measure a resistor, then stick the leads in a 117VAC outlet without touching the meter. It figures out that you're done with the resistor and now want to measure ACV. Instantly selects the right function and range and displays the result. It has a very large LCD display, which is good for old eyeballs. Recommended.

Big Clive

I've got a few of the Aneng autoranging units here. I should make a video about them.