Home Creators Posts Import Register Favorites Logout

Content

An unusual 12V inverter system for driving a fluorescent tube. Unlike many others it doesn't use simple circuitry to drive the tube cold-cathode style, and that means the tube should last much longer.

https://youtu.be/Z_ZyiEUJju8

Files

Retro 12V fluorescent light driver with pre-heat

An unusual bit of circuitry in an interesting fluorescent lamp driver. To aid starting and give longer tube life, the fluorescent tube's heaters are energised before the tube is struck. That raises the electrodes up to a thermally emissive state reducing the voltage drop across them and reducing blackening and sputtering. The circuitry with two zeners and a large capacitor on the 555's control pin is unusual. I can only guess it might be for frequency stability with fluctuating voltage. While it would have been best to swap the faulty transistor with an identical one, I drew a blank on that component from my usual suppliers. I looked for alternatives but the need for a low saturation voltage, high frequency operation and similar gain pointed to various devices, but with no guarantee of compatibility. Just for fun I put in an STP36NF06L MOSFET and it works without getting too hot. Thanks to Adam for sending this in. If you enjoy my videos then the easiest way to support the channel is to subscribe for more good video content. But if you would like to contribute a dollar or two for coffee, cookies and gadgets to take apart, you can do so by supporting me on Patreon. I release videos without adverts for critique and feedback on Patreon as soon as they have been made. I also do Patreon live streams, which are much more relaxed and chatty than the busy public ones. https://www.patreon.com/bigclive Alternatively, for a single coffee contribution you can use PayPal:- https://www.paypal.com/paypalme/bigclive #ElectronicsCreators

Comments

NN Thomas

Thanks the video, Clive. Are you aware that the true voltage on many 12 voltage motor vehicles is 13.8 volts? That may account for any voltage regulators being used.

Mark hodgson

Yes I'm sure Clive is fully aware of this fact

Dave Frederick AKA @amorphuc

Interesting. Thanks Big Clive. Was this used as a daytime driving light or actually the low beam? Weird. My 2000 Audi uses HID bulbs which seem to be really reliable though I replaced them with more natural 42K (or so) bulbs. (From Ali of course at a fraction of price the German ones) Different sort of tech of course as they are more like Mercury vapor lamps though they strike pretty quickly.

joe wrench

Tha k you for this,Clive. Im recovering from surgery and hiding from the cold temps .... so rather shut in. With all thats happening these days, I find myself eager and waiting for your videos . Thanks.

Charles Bruckner

These are very common in older caravans /RV's

Big Clive

these are just for internal use in cabs and cargo areas.

richard ockman

Pin five is labeled as control voltage , it can be used to vary the timing of the circuit independently of the RC network. this could change the width of the output. It also can be used to produce frequency modulation . This is from a paper back book 110 IC TIMER PROJECTS by Jules h. Gilder.

Mike Page

That reverse protection diode is the reason the fuse is a PTC. It's a clumsy method but cheap and doesn't drop any voltage. P channel FETs weren't always affordable.

Mike Page

Hans Camenzind was the inventor of the 555. Perhaps a toast, later?

Mike Page

I wonder if the 2.4V zener is something to do with preheating?

Big Clive

I did ponder if it gave some sort of duty cycle or frequency ramp up.

Big Clive

He seems to have been behind many interesting things, like the fully integrated class-D amplifier.

Big Clive

I do see the reverse polarity shunt diodes pop up in random locations. Sometimes they shunt out completely after an incident.

Brian Cummings

lord, clive - what did you get in a fight with?

Big Clive

Just the usual state of my hands at this time of year.

Big Clive

I have a much easier winter these days, but it's still always posed a problem, even with regular moisturising. When I was doing a lot more winter work outdoors it was really bad.