Home Creators Posts Import Register Favorites Logout

Content

I can't believe they put a full load cell into such a tiny package.

The circuitry is basically an ASIC (Application Specific Integrated Circuit), possibly with a microcontroller on board. It has very few support components.

The video also shows how to recalibrate the unit with a known weight, but you can literally tell it you're calibrating it with a 50g weight and then put a 10g one on instead for a major miscalibration.

https://youtu.be/ddSnm_Pqvyw

Files

Inside a smug drugglers secret scales

Tiny covert scales for weighing suspicious substances. But also a miracle of mass production, as they seem to be very accurate. It's actually viable to buy them just for the miniature load cell. Note that to open these you need to slide the front fascia with fake buttons away from the keychain hole. It can be quite fumbly the first time you try it. This is one of those things that takes a lot of science and compresses it into an extremely cheap integrated circuit. It's bizarre that it can interpret the tiniest flexing of a piece of aluminium, via tiny stickers with a zig zag resistance track on them. These scales are rated for 200g max. Never exceed the rating of a scale excessively as it may affect the calibration, or even damage the load-cell. The scales do come pre-calibrated, but here's how to recalibrate them if needed. You will need an accurate calibration weight of 200g, 100g, or 50g. It's better to use a weight that is close to the scale's maximum rating. You can improvise a calibration weight by getting a suitable plastic cup and using another set of known accuracy scales to fill it to a total of the desired test weight with sugar. You can also buy sets of accurate calibration weights online. The calibration must be done on a flat and level surface, and with no strong draughts like fans. With no weight on the platten, turn the unit on and then press both the buttons simultaneously until 200.00 is displayed. Now use the power button to select your chosen calibration weight. 200g, 100g, 50g, 20g,10g, 6g, 5g or 1g. Then press the M/units button to start the calibration process. The scales will get a zero reference and then prompt you to place the shown weight on the scales. Once you've done that there will be a brief pause while it waits for the weight to stabilise and then it should briefly display PASS and then the weight of your calibration weight. Note that the accuracy of the scales can be skewed by putting on the wrong weight or a low quality or damaged calibration weight. This can also be used to cheat people by miss-weighing stuff. Those who might be affected may wish to carry their own test weight with them to check the accuracy of the scales being used. If you want one of these tiny scales then Here's a link to the item on AliExpress (not a sponsor). This is an affiliate link, but that will not affect the price you pay. https://s.click.aliexpress.com/e/_c4ORONwx Price should be around £3. You will also need a CR2032 lithium cell to power the scales. If you enjoy my videos then the easiest way to support the channel is to subscribe for more good video content. But if you would like to contribute a dollar or two for coffee, cookies and gadgets to take apart, you can do so by supporting me on Patreon. I release videos without adverts for critique and feedback on Patreon as soon as they have been made. I also do Patreon live streams, which are much more relaxed and chatty than the busy public ones. https://www.patreon.com/bigclive Alternatively, for a single coffee contribution you can use PayPal:- https://www.paypal.com/paypalme/bigclive #ElectronicsCreators

Comments

Jon Knight

You could use it for weighing components too.

PlutoniumJesus

Sugar addiction ruins lives and is a scourge upon modern society.

Big Clive

Sadly, it lacks the component counting option.

Mike Page

Thanks, Clive. This video neatly illustrates an eternal truth: mechanics come first, then electronics, then software. Then cloud-y things, maybe.

adorfer

weighing screws and metric nuts is a lot faster than manual couting!

Big Clive

I was really impressed by the miniature load cell.

Mark Wilson

Clive, you look much younger in this photo for some reason

IamFubar

I have been known to utilize items like this when having a disagreement about the carat weight with my friendly neighborhood diamond dealer :)

Dustin S Cochran

Is that a calibration mode, or simply a self test? The pass shown seems to indicate at least the possibility of the latter.

Big Clive

It's calibration. If you put a different weight on it recalibrates it to that weight so that for instance, if I set calibration mode to 50g and put on a 20g weight it would think 20g was 50g.

Russell Couper

It has those odd holes in the PCB with tracks that went through them before they were drilled.

Big Clive

I think that's to facilitate faster PCB track-continuity testing.

Georg Zitzlsberger

It would be interesting how much these scales are cheating. Do they round up to the next full gram (for some of the expected calibration values) or are they really working with the resolution as advertised?

Big Clive

I think they may just round up a few hundredths if they think it's a test weight.