Home Creators Posts Import Register Favorites Logout

Content

I'll confess that I'd had a few cans of Guinness when I made this video.

It's a look at the widget inside a Guinness can that causes mass nucleation of the nitrogenated drink to create the fine bubbles when poured.

It's very simple. I'm guessing that the atmospheric pressure nitrogen fill is compressed during canning by the increased pressure of a sealed can, then releases a directed mix of beer and gas when the pressure is released.

https://youtu.be/2SEgLeMB7r4

Files

Guinness widget explored

If I have to be honest, this is a lot simpler than I was expecting. In the past I looked at an older style widget and it was composed of two halves that separated forcibly with a loud pop because it was still under pressure. My guess is that this widget is filled with nitrogen and when the can is sealed, the guinness may enter the sphere and pressurise the gas inside it. When the can is opened and releases the pressure, the mixture of guinness and nitrogen is blown out through a small hole and possibly creates a mass nucleation effect to liberate more nitrogen from the drink. This gives the effect of draught Guinness being poured in a pub. It seems to work quite well. If you enjoy my videos, supporting the channel on Patreon helps keep it independent of YouTube's quirks, avoids intrusive mid-video adverts, gives early access, bonus footage and regular quiet Patreon live streams. https://www.patreon.com/bigclive Alternatively, for a single coffee contribution you can use PayPal:- https://www.paypal.com/paypalme/bigclive #ElectronicsCreators

Comments

Brian Deschene

I’m sorry. Three Guinness in a row in one sitting. I wouldn’t need to eat most of a day I’d feel so full.

Dean Gross

A wise man told me that there is no smart way to cut yourself using your own knife.

Mike Page

There could be a patent explaining the manufacturing process. Clive - your idea of liquid nitrogen sounds credible, and may have an influence on the choice of "chewy" plastic. Let's say: The baubles are supplied unfilled to the canning location. As filling nears, a wee bit of liquid nitrogen is squirted in via the hole and the bauble is dropped into the filled can. The can is then sealed in the normal way. (These steps could be at several proximate stations.) The final step is how the gas does not escape until the can opens. That could be the magic of the patent. But I think of Goretex etc.

Gary Bleads

According to grok: During canning: The empty widget is placed inside the can before filling. The can is filled with Guinness, which contains a mixture of dissolved carbon dioxide and nitrogen. A small dose of liquid nitrogen is added just before sealing the lid. The liquid nitrogen rapidly vaporizes into gas, increasing internal pressure within the sealed can. This pressure forces a small amount of beer and gas into the widget through its tiny pinhole(s), compressing the nitrogen already inside the hollow sphere. The widget floats in the beer once the can is sealed, with its hole(s) positioned to allow this equilibration of pressure. When the can is opened: The pressure inside the can drops abruptly to atmospheric levels. The higher pressure retained inside the widget forces the trapped beer and compressed nitrogen out through the tiny pinhole at high velocity. This creates a powerful jet that agitates the surrounding beer, releasing dissolved nitrogen (and some carbon dioxide) as numerous microscopic bubbles. These tiny bubbles rise and form the signature thick, creamy, long-lasting head characteristic of Guinness.

Big Clive

The quantity of liquid nitrogen must be very critical. to avoid over pressurising the can. It must also be quite timing-critical and foggy.

Todd Sharp

I could be crazy, but didn't you already do this exact video in the past?

Big Clive

Possibly. It was a spontaneous video, so I may have done it again. That said, "fresh" videos on YouTube seem to perform better than old ones.

Todd Sharp

I can't find anything exactly like this, just a few other Guinness related but not about this widget.

Alice Chapman

Try around 7 at the Hop Store at the St Jameses Gate Brewery in Dublin.

Alice Chapman

I remember one about the clip on widget. Nitro-surge or sommat like that.

electronbox

I wonder if they seal the hole with a soluble 'glue' which then dissolves once in the can, allowing the gas to escape when opened? The pressure in the ball would be around 15-30 psi to match the pressure in the sealed can. The other possibility is that the canning process environment itself is pressurised with nitrogen, the ball, purged with nitrogen gas is dropped in and then the can is sealed.

Big Clive

They apparently put a drop of liquid nitrogen in during the canning process.

electronbox

Interesting - they must chill the widget as well. I work with liquid nitrogen and it boils almost instantly when it touches anything, more vioently for example than liquid propane.

Big Clive

I'd guess they must add it right at the very last moment and it will do that thing where it skitters around on top of the liquid with its gaseous thermal shield. I do wonder what happens if they have a production line blip and a triple dose of nitrogen goes in.