Home Creators Posts Import Register Favorites Logout

Content

I've not done a build video in a while, so here's the full assembly of a small doorbell effect chip.

https://youtu.be/EHPUPLxhSA8

Files

Very simple 555 based doorbell kit

The design of this circuit is quite clever. It's very reminiscent of the type of projects often found in electronic magazines of the 80's and 90's. It uses the venerable NE555 chip to produce a two tone chime effect when a button is pressed. The way it gives two different tones is quite clever. Note that the standby current is a couple of milliamps, so this module is not suited to continuous battery operation. The 555 chip contains a group of features inside that can be configured and used in many different ways. Although it is often used as a timer, it also has the ability to work as a threshold detector. It can sink and source enough current from its output to drive significant loads of around 100mA. Although invented in 1971 the chip is still widely used over 55 years later. It's so common that it can be bought in bulk at low cost. If you want to try one of these kits then here's a link to the item on AliExpress (not a sponsor). This is an affiliate link, but that will not affect the price you pay. https://s.click.aliexpress.com/e/_c3O9sIdJ These kits usually cost around £1 and can often appear as bundle deal items. If you enjoy my videos, supporting the channel on Patreon helps keep it independent of YouTube's quirks, avoids intrusive mid-video adverts, gives early access, bonus footage and regular quiet Patreon live streams. https://www.patreon.com/bigclive Alternatively, for a single coffee contribution you can use PayPal:- https://www.paypal.com/paypalme/bigclive #ElectronicsCreators

Comments

The Black Chamber

Oh man, do I miss working with the old 555. I miss a lot of things.

Uncle Phil

My first 555 project was an intervalometer for my digital camera. I was taking pics of the phases of the moon.

NN Thomas

My experience with soldering was that fingers became less sensitive to the heat. Had a similar experience with cooking. If you had enough of these kits could you make an instrument similar to a Stylophone?

Dave Frederick AKA @amorphuc

Younger or older? Not sure. Born in 1961 here but then I was a wee lad perhaps when this came out? My dad, born in 1911, this would have been new to him. He was an electrical engineer at Stewart Warner in Chicago. A calibration expert. (he actually did the calibration on all the instruments on the captured U505 at the Museum of Science and Industry)

Chris Horry

The 555 IC was built in 1972, so 6 years older than me. I did my first ever project using one in school, an egg timer that I was very proud of when it finally worked! Please do more of these videos, they are very zen to watch.

Big Clive

You could probably make a stylophone with a single 555 and selection of resistors.

Dennis

I had an IC roller years ago. Was only yesterday thinking I should get another, but then I don't do enough to make it worthwhile, and IC's seen to be a lot smaller these days - currently playing with an si4732A10 that needed a daughterboard to give it pins I could use

Martin Sowle

Was your last kit build a flip flop or was it a clock? As you say electronic kit builds are so much fun. I have a quiet a collection that I put by over the years that I promised to start when I retired. Now that I am it really nice when you are building and the next thing you know it just getting light and it 6 o'clock and you think "so what I don't have to go to work now" such a great feeling.

Zeedijk Mike

Love these project build videos. Unpacking is fun. But this is sooo relaxing

trekkiedane

I now have this sound as a notification on my phone :-D

Phil Collins

In the late 70’s I was coming towards the end of my apprenticeship and did a college project based on the 555. First IC I ever really understood.

adrian

I bend the wires directly behind the pcb so the resistors are held close to the board. Is there an advantage in bending the wires much further away ? Do you have a CMOS 555 to hand ? It might reduce the standby current a bit, though probably not enough for batteries

adrian

My first significant bang was my treasured multimeter (one of those little TMK chinese analog ones). I attempted to measure the output of a spark coil. Too high impedance to show much but not too high to damage the rectifiers. Then attempted to measure the mains which finished off both the rectifiers and the pcb tracks. Very sad 10-year-old in 1970 or so.

Big Clive

I prefer not to bend them right next to the PCB as it makes it much harder to remove components if needed.

Nuts 'n' Proud

Clive I have a 555 timer in the video modulator box on my ZX81. It helps correct the missing back porch defect in the PAL video signal. Made on a piece of veroboard.

Keith Who

You could try a CMOS 555 and get a lower stand-by current. Thank you for the video. KW.