Home Creators Posts Import Register Favorites Logout

Content

When you see what's inside these sensors it all seems a bit basic. But in reality the technology is quite complex.

https://youtu.be/lFz5HdONtr8

Files

Exploring a gas detector module - with schematic

The seeming simplicity of this sensor, and the massive resistance variation it exhibits when exposed to various gasses is pretty amazing. It probably trivialises decades of scientific research. The module I demonstrated the sensor with is often sold as an Arduino module, but it does NOT require an Arduino or any other specific platform to be used. The module has an onboard comparator with adjustable threshold, so the unit can literally just be set to a fixed level and will sink useful current on its digital output to drive an external, transistor or opto-isolator. (about 12mA available) These modules are available with various sensors fitted for specific types of gasses and vapours, but are less suited to measuring relatively inert gasses like carbon dioxide. They also tend to react to a range of gasses, which makes them less suited to monitoring very a specific gas. The manufacturers of this type of module tend to recommend a long burn-in time when the sensors haven't been in use for a long time. The sensors will still work, but they won't fully stabilise until they have been powered for long enough to condition the sensing element. The heater in these sensors passes about 150mA continuously, so they are not really suited to continuous battery use. These modules are very cheap and readily available from all your favourite online technical marketplaces. Here's a link to the item on AliExpress (not a sponsor). This is an affiliate link, but that will not affect the price you pay. https://s.click.aliexpress.com/e/_c3sZc9Rz If you enjoy my videos, supporting the channel on Patreon helps keep it independent of YouTube's quirks, avoids intrusive mid-video adverts, gives early access, bonus footage and regular quiet Patreon live streams. https://www.patreon.com/bigclive Alternatively, for a single coffee contribution you can use PayPal:- https://www.paypal.com/paypalme/bigclive #ElectronicsCreators

Comments

WoodmanSTL

It sounded like this detects combustible gasses? If so, I’d imagine the strong double mesh might prevent the heating element from igniting gasses outside the sensor. Interesting bit o’ kit!

Zeedijk Mike

I think I need to get one of those. After I had builders in, my stove has gotten a small leek by one of the burners. Though I normally turn off the gas by the wall inlet - I do forget now and then, so I can smell it when I go into the kitchen in the morning. No explotions yet - obviously, else I wouldn't be able to write this :-)

Charles

When you showed this sensor during the unboxing, I looked at the datasheet for it. At least in the Winson company's datasheet, in the things-to-avoid section, it mentions the usual suspects, plus long-term storage (as you say), but also "Used in high gas concentration". It goes on: "No matter the sensor is electrified or not, if it is placed in high gas concentration for long time, sensors characteristic will be affected. If lighter gas sprays the sensor, it will cause extremely damage." I'm curious if you testing it with direct butane gas affected it, though you can't really test this one now.

Dave Davies

Combustible gases react with oxygen in the surface of the tin oxide which releases conduction band electrons which reduces the resistivity of the surface. Almost any combustible gas will be detected to a greater or lesser extent. The reaction only happens above about 100C so the heater is required.

Martin Sowle

I wonder why they used red to show it's on and green to show it triggered you would have thought it would be the other way round

Alex Taylor

They make explosion detectors that look similar to a fire alarm. They are about $50. I put one in the garage next to the gas lines and furnace because I know that pipe gets bumped a lot.

Keith Who

I’ve had one of these in my workshop as part of the workshop monitoring. The analog output goes to an Arduino nano along with a temp/ humidity sensor and a CC11011 telemetry transceiver. The unit sends temperature, humidity and an alarm if it detects smoke. The sensor had to be left running for about 5 days in my case before the output was stable, but I don’t just look at a level on these modules. It takes measurements over 30 minutes and generates an average and if any of the measurements taken over the next 30 minutes exceeds the previous average, it sees that as an alarm. If I light a small gas touch and don’t light it within a second or so, the gas detector alarms. And that’s with the gas detector module in the ceiling about 5 feet above the work bench. It’s been working now for over 5 years and still stable, no false alarms unless someone is a bit slow at lighting a gas touch.