Home Creators Posts Import Register Favorites Logout

Content

This module is designed to facilitate charging of a suitable battery from a solar panel, and then turn on a load at dusk.

Although the listing states it is suited for 6-45V use, I don't think it is. The full battery voltage is applied to the gate of the MOSFET at night, and most MOSFETs have a maximum gate voltage of about 20V between gate and source. This MOSFET is completely blank, so I can't check its data sheet.

The unit also requires a suitable battery pack with over charge and discharge protection.

https://youtu.be/_chfkWeB1KU

Files

Solar lighting module with design issues

This is one of many useful little modules available from online marketplaces. It states in the listing that it is designed for use from 6V to 45V but I absolutely do NOT recommend that it's used above 12V. That said, with a suitably protected three cell lithium pack, a suitable solar panel and your choice of light, it could be very useful. The module does not have any charge control other than the blocking diodes between the solar panel and battery pack, so the battery MUST have protection against overcharge and over-discharge. If you get Deja-vu then it's because this handy little module was featured in an unbagging video. If you want to buy one then here's a link to the item on AliExpress (not a sponsor). This is an affiliate link, but that will not affect the price you pay. https://s.click.aliexpress.com/e/_c3cQYI59 This module would be suited to off-grid applications where low level comfort light was wanted at night. If you enjoy my videos, supporting the channel on Patreon helps keep it independent of YouTube's quirks, avoids intrusive mid-video adverts, gives early access, bonus footage and regular quiet Patreon live streams. https://www.patreon.com/bigclive Alternatively, for a single coffee contribution you can use PayPal:- https://www.paypal.com/paypalme/bigclive #ElectronicsCreators

Comments

Andrew Ellis

Good piece, many thanks! Looked at some LI batteries for a version of this. My question: How protected is protected? I can imagine a vendor using nothing more than a thermal fuse and claiming it was protected enough. Overcharge and over discharge protections are always claimed, thermal sometime is. Overcurrent? Maybe. Reverse polarity? Maybe. Even if one pays attention to the claimed protections, the quality of their implementation is still unknown, yes?

James Prior

It’s more fun building your own bases on a video you did .. well, a good few years ago now! Although when PCB printing became much cheaper, I did have some made.

AlfaGuy

What's the reason for the 2 Schottky diodes in parallel. Lower resistance, better current handling?

Malcolm J Bannister

Wonder if it would work OK with 3 x 18650s on a 3S charger board.

Big Clive

It should be fine with a 3-cell pack with onboard protection PCB.

Big Clive

I would guess it's for higher current handling.

Big Clive

The battery protection would need an electronic protection module to shut off the charge as soon as any cell reached a fully charged state or a fully discharged one. They're very cheap and common.

Charles

Isn't that MOSFET also weirdly oversized to drive lights that might draw an amp or two at most? When you can get tiny little ones like an AO3400 (in an SOT-23 package) that handle 5A for pennies apiece, why would you go for something huge like this?

Big Clive

Given the size of the input diodes I'm wondering if they are aiming it at higher power setups. But a slow turn on would not be ideal with high current.