Home Creators Posts Import Register Favorites Logout

Content

This is a common lighting system that is appearing everywhere. It's a clever design, since it allows a massive honeycomb shaped grid light to be shipped in a surprisingly small box.

As you would expect these days, there are slight technical issues. The LED strips are slid into a slot in the generic plastic extrusion with no major heatsinking, and there is a possibility when installing large arrays of the lights that are powered with multiple feeds, for the connectors to be reversed. That can cause a short circuit through thin copper coated aluminium wire inside the plastic housings.

But it's an interesting lighting system. I may put some hexagons up on my garage ceiling to see if it's good for general video illumination.

https://youtu.be/Z_txN9ntg-A

Files

Inside a HEX-light - and the slight electrical issues

This type of hexagonal lighting grid seems to be very popular in many modern retail outlets. It packs a large light into a small box as a series of illuminated batons and joining pieces that allow it to be assembled in various shapes to make a very large illuminated honeycomb grid on the ceiling or a wall. There is an internal wire link in each strip that feeds power to all parts of the light grid. There are issues though. Aside from the copper coated aluminium wire, the system is designed to have larger arrays fed at multiple points, and aside from the risk of someone trying to feed it from multiple circuits and causing a backfeed shock hazard, the connectors on some systems are not polarised and it is possible to cause a dead short through the flimsy internal wiring if plugs are not put on in the correct orientation. Ideally that would just trip a circuit breaker, but when one of an inappropriate size has been used there is a risk of the internal copper coated aluminium wire having a high enough resistance to cause sudden thermal issues. To put multiple feeds on in the correct orientation may require probing between the plug and receptacle. This one came from an eBay seller. You can find them on all the usual online selling platforms though. Note that there are multiple systems with different connectors and shades of white, so buy a larger kit than needed so you have some spares. In a way it's quite a nice system, and quite fun to play with. It's also impressive how a huge honeycomb light grid can be shipped in such a small box. If you enjoy my videos, supporting the channel on Patreon helps keep it independent of YouTube's quirks, avoids intrusive mid-video adverts, gives early access, bonus footage and regular quiet Patreon live streams. https://www.patreon.com/bigclive Alternatively, for a single coffee contribution you can use PayPal:- https://www.paypal.com/paypalme/bigclive #ElectronicsCreators

Comments

Slymouse

If they are addressable could you make them flash or change color with a 555?

Pierre

Now I want this. RGBWW or addressable would be right up my alley

Dennis

Each LED is addressable by using a daisy chain effect. Flashing them requires a lot of accurately sent signals to each LED, a unique address for each one. The 555 is unable to send this type of signalling since it can only send either an on or an off signal. Adding a 555 to a driver board would be a waste of time, because flashing on and off can be done without difficulty in code.

Big Clive

I bet there are low voltage addressable versions.

Amro

I'm surprised they're not low-power LEDs. if i was selling one that's what I'd do.

John Lundgren ~ Acme Fixer

Here's a chip that you might find in cheap consumer goods, and make a mental note of for the future. Thanks, Clive, for your excellent inquisitive videos. ""The PADAUK PMS152 is a highly affordable 8-bit One-Time Programmable (OTP) microcontroller. It features 1.25 kW of ROM, 80 bytes of RAM, built-in PWM generators, and robust 1.8V to 5.5V operation. It is commonly used in low-cost, disposable, and consumer electronic applications.Core SpecificationsArchitecture: 8-bitMemory: 1.25 KW OTP (One-Time Programmable) program memory, 80 Bytes data RAMOperating Voltage: 1.8V – 5.5V (enables great low-voltage and battery operation)Timers: One 16-bit timer, one 8-bit timer (with 6/7/8-bit PWM)Special Features: Triple 11-bit SuLED (Super LED) PWM generator, built-in comparatorPackages: Available in SOT23-6, SOP8, and SOP16""

Tony Webb

Not a dimmable driver

Big Clive

I looked at the Padauk microcontrollers, and while tempting, they need specialist equipment to program. I don't think they can be programmed with a universal programmer.