Home Creators Posts Import Register Favorites Logout

Content

A look at the circuit boards used in some of the pro-grade smoke/fog/haze machines we use at work.

We currently have ten haze machines on the Edinburgh Tattoo esplanade that run for most of each show, and four fog machines for dramatic bursts of fog like performer entrances through the castle doors.

https://youtu.be/2H8i2pUjv48

Files

Professional haze machine circuit exploration

This video is an exploration of the circuitry used in many professional haze and fog machines used in the event industry. Notably the Haze Base, Unique Solutions machines. These machines share a common base control system, but differ in physical appearance. By understanding the circuitry it will help with fault diagnostics and identifying if a PCB needs replaced. The most common problems with these machines are pump failure, heater blockage and moisture issues on the control PCB. But relative to the heavy use effects like this get in the entertainment industry, they are very reliable units. Many of the problems can be attributed to user error and the rough life touring equipment has. If you enjoy my videos, supporting the channel on Patreon helps keep it independent of YouTube's quirks, avoids intrusive mid-video adverts, gives early access, bonus footage and regular quiet Patreon live streams. https://www.patreon.com/bigclive Alternatively, for a single coffee contribution you can use PayPal:- https://www.paypal.com/paypalme/bigclive #ElectronicsCreators

Comments

Mike Hughes

That circuit board really does look a well thought out design, and seems to be manufactured to a very high standard, as you'd expect for a professional bit of kit... probably with a price tag to match. I don't know why they don't put conformal coating on the control boards though if they are prone to the moisture and fog. Really interesting video, I like seeing this top quality stuff explained, it is a treat from the usual tat fro China that we tend to see on most electronic circuit boards. Thanks BC!

Mike Page

Thanks, Clive - a fun teardown. That MCU input to the thermocouple preamp is for open wire detection. Pulse it high and see a linear response on the ADC, because the thermocouple cabling is only a few Ohms or so. But if the ADC gets railed, you have an open TC. Incidentally, that's a solid argument for spotting the two TC leads separately. Otherwise a common weld could come loose and you'd be measuring air without realizing. The T5C is an LM50 cold junction. Thermocouples only measure temperature differences and you need a reliable local reference. (An NTC divider would have done fine, didn't need a semiconductor. But the LM50 makes the arithmetic easy-peasy, no floats or logs.) Last point: it's weird to see a crystal on an MCU these days. Unless there are strict timings to be observed (eg CAN), a lot of applications work fine on internal clock. It's cheaper and one less high impedance circuit to expose to schmoo.

Paul Ste. Marie

It would be nice if your smoke machine could control wildfire smoke. 🌳🔥🌲

Big Clive

That makes sense, and I had a unit on the bench tonight with an E1 error that I worked out was because one of the thermocouple bonds had been broken by a loose air pump that had been detached from its fixings. The crystal may be for the synchronous DMX data reception.

Mike Page

DMX - yes I suppose so. It depends how the bits are sampled how much "elastic" you get. The old PICs for example had a 5% internal oscillator making them a bit marginal. New parts tend to be 1% factory trimmed - but that's still not good enough for CAN.

Mario2020

Ottec is a German company specializing in Nebelgeräte (hazers and foggers).

Spooks Wood

Hi all! Actually had a HazeBase Hazer Pro on my table with a brocken powerlead. Very soggy inside. The board still looked good. CU all!