Home Creators Posts Import Register Favorites Logout

Content

A look at some common remote control LED tape sold by a UK retailer famous for stocking cheap tools and gadgets.

https://youtu.be/P2_0LIvQAfo

Files

Middle of Lidl LED tapes - with schematic and WLED test

A look at the remote controlled LED tapes often sold by Lidl under the Livarno brand. These are notable for being 24V which keep the current down to avoid significant intensity drop along a long run of tape. The downside of that is that the LEDs are only controllable in sections of 5 or 6 LEDs depending on the tape. The remote controls are very strange. They have a colour section and a white section that makes the controller behave like two separate units. Oddly, the remote controls are not interchangeable between the 5m and 10m versions. The RGB and white tapes come with packets of mounting clips, and the older RGB version also has adapters to allow sections of tape to be linked or split. No link to buy this, since it is sold by a European high street retailer. But here's a link to their website:- https://www.lidl.co.uk/ If you enjoy my videos, you can buy me coffee, cookies and gadgets by supporting the channel on Patreon. You also get early access to videos without adverts, bonus footage and regular quiet Patreon live streams. https://www.patreon.com/bigclive Alternatively, for a single coffee contribution you can use PayPal:- https://www.paypal.com/paypalme/bigclive #ElectronicsCreators

Comments

PlutoniumJesus

Remote controls with separate coloured and white sections, also known as apartheid controls.

Mike Page

The 24V is a good idea but with LEDs wired in series you lose spacial resolution for effects. Someone needs to do double-layer tape ie LED layer on top and extra power traces on bottom tape. (Or thicker copper - but that would be less flexible.)

Brian Deschene

I’m surprised by the 2k resistor in-line on the data. Wouldn’t that accumulate one section after another causing a lot of attenuation by the end of a 5m or 10m run? Or am I misunderstanding something?

Big Clive

The chips buffer the data before retransmitting it to the next chip.

Big Clive

Most LED tape has two busbar tracks on the back. But current draw of classic 5V addressable LEDs soon adds up. About 60mA at full white per LED, so if you have 60 per metre it could potentially be 3.6A per metre or 18A for a 5 metre roll.

Brian Deschene

Ah. That makes so much more sense. Thank you for clarifying. Always enjoy your posts!

Charleso

In fact most chips have fairly wide tolerance of what they will accept before regenerating the signal, so a very common hack is to put one pixel right by the microcontroller and use it as a cheap line driver. It's common enough that WLED has the option to set the first LED so it is skipped in the patterns and will never light up. It's very handy in short runs as often it allows you to feed the strip with 3.3v logic levels rather than 5v logic levels so you can get away with driving the strip from the microcontroller directly.

Mike Page

I know, it's horrific. I've got a 5m strip and running some patterns the "5V" at the far end is barely over 2V (I have a 12A PSU). Amazingly, colours still match pretty well.

Gordo

My friend and I are watching this here, wonder why there's a different value series resistor on the white led chains. If the WW/CW line is simply being pulled to ground, wouldn't that mean each led chain + resistor is isolated form all the others?

Big Clive

The different resistors between the two lengths of LED tape are to reduce the total white LED current on the longer tape. With the RGB LEDs the current can be controlled in software by capping the maximum intensity.