Home Creators Posts Import Register Favorites Logout

Content

Despite everything going wrong in the project, it's actually still a watchable video.

Now I know that the little DW01 protection modules can be fickle.

https://youtu.be/7l--KgoTh50

Files

The LED candle project that went wrong (twice)

This project was supposed to be so easy. But a decision to add over-discharge protection backfired when I discovered that when the little DW01 lithium cell protection modules are powered up, they sometimes go into standby mode and can only be "woken" by charge current going into the cell. I hadn't broken the wire on the LED (until I pulled it!). The module had just gone into standby mode. On a plus note, the candle now has a USB-C charge port inside it for recharging the lithium cell. I like to show my failures so you don't feel so bad when your own project goes wrong. AliExpress has loads of flickering LEDs in all colours, but I've not been able to find packs of the newer style subtle version yet. Here are the scripts for making the candle parts. You can copy and paste them into OpenSCAD to get custom 3D printing files. The base:- //Candle base //Base thickness base=1.5; //Base diameter basedia=50; //Insert height height=7; difference(){ union(){ //base plate translate([0,0,0]) cylinder(h=base,d=basedia); //insert translate([0,0,base]) cylinder(h=height,d=23); //reinforcing taper translate([0,0,base]) cylinder(h=2,d1=25,d2=23); } //inner core translate([0,0,1.5]) cylinder(h=10,d=21); } $fn=100; The shaft sections:- //stackable Candle shaft //Height of main body height=50; difference(){ union(){ //Main body translate([0,0,0]) cylinder(h=height,d=25); //taper translate([0,0,height]) cylinder(h=3,d1=25,d2=23); //insert translate([0,0,height+3]) cylinder(h=6,d=23); } //core //Main body translate([0,0,0]) cylinder(h=height,d=23); //taper translate([0,0,height]) cylinder(h=3,d1=23,d2=21); //insert translate([0,0,height+3]) cylinder(h=6,d=21); } $fn=100; The flat top:- //Flat candle cap difference(){ union(){ //body translate([0,0,0]) cylinder(h=6,d=25); } //core translate([0,0,1]) cylinder(h=10,d=23); //wick slot translate([-1,-.5,-1]) cube([15,1,10]); } $fn=100; The pointed top:- //Pointed candle cap difference(){ union(){ //body translate([0,0,0]) cylinder(h=6,d=25); //cone translate([0,0,6]) cylinder(h=15,d1=25,d2=0); } //core translate([0,0,-1]) cylinder(h=7,d=23); translate([0,0,6]) cylinder(h=14,d1=23,d2=0); //wick hole translate([0,0,17]) cylinder(h=7,d=1.5); //slot translate([0,-.5,-1]) cube([15,1,22]); } $fn=100; If you enjoy my videos, you can treat me to coffee, cookies and gadgets by supporting the channel on Patreon. You also get early access to videos without adverts, bonus footage and regular quiet Patreon live streams. https://www.patreon.com/bigclive Alternatively, for a single coffee contribution you can use PayPal:- https://www.paypal.com/paypalme/bigclive #ElectronicsCreators

Comments

Greg Bell

Fickle is such a fun word

Mike Hughes

And I used to think it was just me that screwed up every project at least once....

Dave Frederick AKA @amorphuc

Too cool. Thanks Big Clive. I always love the projects. I think I learn as much from your troubleshooting things as I do from the projects themselves. The candle here running for such a long time is really nice. I think I like the rechargable one in that it makes it nice and easy and perhaps not require various connectors to recharge.

joe wrench

Thank you for your honesty and realism in these videos , Clive. I appreciate your integrity.

jswizard

Yeah, totally get it. Sometimes everything I touch turns to shit. It can be hard to break the cycle. Thanks for boosting my confidence by showing it happens even to the Big Clive dude.

Paul Cabrelli

"....... and here is one I f@cked up earlier.......!!!! " ---- Blue Peter, eat your heart out :)