Home Creators Posts Import Register Favorites Logout

Content

A look at the circuitry and safety hazards of the cheapest smoke machine I could find on AliExpress. This one was shipped locally within the UK.

https://youtu.be/eGN6u2uqmtY

Files

Cheap AliExpress smoke machine teardown - with schematics

A look inside one of the cheapest smoke machines from AliExpress. Although these are commonly referred to as smoke machines, they actually create a dense fog of tiny glycol droplets. The most common faults with these units are the pump gumming up in storage or the thin capillary tube in the heater block getting clogged by particulate residue from the fog fluid. Using good quality fog fluid will reduce the risk of that due to its composition being pure glycols and distilled water, but the cost difference may mean it's cheaper in the long run to use lower quality fluids and accept that you'll need to replace the machine more often. The professional event industry routinely replaces heater blocks or machines as it's just the nature of the equipment. Some users flush their machines through with water and vinegar to "descale" the heater tube, but I'm not sure how effective that actually is. If you do that, then it's important to flush it through with fog/smoke fluid afterwards before storage. If experimenting with making your own fluid, I recommend using distilled water. The cheapest and easiest fluid is just glycerin/glycerine/glycerol (they're all the same thing) with distilled water. You can vary the ratio to suit your needs, but typically 20% glycerin to 80% water for many machines. Glycerin creates a very dense long lasting fog, with the downside of being a bit messier than the lighter glycols like propylene glycol and triethylene glycol. Most smoke machines operate at between 240 to 300 degrees Celcius. The risk of burning glycols tends to happen above 370 degrees Celcius. Do NOT use oil in this type of machine. A common thing in the entertainment industry is people mixing up water and oil based haze liquids. Aside from the unpredictable results in the heater block, the oil can damage the seals in the pump by making them swell up and jam the piston. The pumps can usually be opened for servicing, but they have lots of springs and seals in them that have a tendency to self-disassemble suddenly when opened. I have a video showing how to service them. The construction and circuitry in these units is very standard and hasn't changed for decades. These basic units have one major quirk in that they won't pump fluid while the heater is active. This is to prevent the risk of liquid being pumped through the heater block while it's cold and spraying out as liquid. If fog timing is critical then you can modify the unit to power the pump directly once the unit is up to temperature. The use of an XLR connector on these units for the mains powered remote is a huge safety issue. There is a risk of shock, equipment damage (never plug a DMX network into that port!) and in some instances potential bypassing of the thermal control if a remote cable shorts to ground. The principle of fog generation is fairly simple. A mixture of glycol and water is pumped slowly into a very hot heater block. As it enters, the water boils forcibly atomising the glycol into a fog of tiny droplets that are forced out by the steam pressure. Some hazers combine air with the fog fluid to create bubbles of fluid that result in a more controlled drizzle of haze versus a jet of fog. If you want a cheap smoke machine to play with, then here's a starter affiliate link to this unit, noting that this particular one was shipped from a UK warehouse. https://s.click.aliexpress.com/e/_c3VkvtKD For local voltage machines try a search for:- 500w rgb smoke machine if you substitute 400W for 500W it may show a different range. Be aware that cost variation is massive for the same machines, so shop around for the best price. This type should cost less than £20. You can also find similar machines on eBay and amazon. But do NOT buy second hand machines as they are usually wrecked. If you enjoy my videos, you can treat me to coffee, cookies and gadgets by supporting the channel on Patreon. You also get early access to videos without adverts, bonus footage and regular quiet Patreon live streams. https://www.patreon.com/bigclive Alternatively, for a single coffee contribution you can use PayPal:- https://www.paypal.com/paypalme/bigclive #ElectronicsCreators

Comments

Tony Webb

I have my big huge dmx smoke machine that takes a barrel of ice ready to terrifiy the small children all hallows night!

Ymir the Frost Giant

Shmoky - I was typing this just as you said it! A mate of mine long ago was very amused that the German for 'Exit' is Aus Fahrt (arse fart).

Ymir the Frost Giant

Well done for reporting the safety issue up front - that alone may have saved some lives. And even more well done for spotting it - and safely. Is there a simple way to make it safe, or could the whole thing be rejigged?

Cookie

So a Mic + XLR can produce double-ended smoke machine. That's scary.

Dave Frederick AKA @amorphuc

Thanks Big Clive. Is the resistor (R4 at roughly 12:17) 47 or 46 ohm? Could be the color on my computer I guess.

Paul Schuur

Clive, I fail to understand the circuit of the 'main' unit (around the 9 minute mark). The drawing suggests that the heater's always on, but it probably isn't? Or is it? Not sure. You mentioned that it's not designed to run continuously, but that then only applies to the pump, and not the heater? Confused ...

Mark Hajducki

Last year I bought a snow machine that outputs 240V over XLR; it came from CPC. On cheap snow machines, the remote is pointless, as the same level of control can be achieved by switching the mains power supply.

Roland

The (upper) thermal switch opens once it's up to temperature and switches the heater off. While you run the pump the heater gets powered as well because it's in series, but at very low power because the pump is passing a relatively low current. Technically, the LED passes a couple of continuous milliamps as well. But at 100 ohms (for a 500W heater) that produces less heat than the poor 150K LED resistor.

Big Clive

That's really odd, as CPC products are normally made to UK standards.

Big Clive

It is a confusing circuit at first as it is cost optimised. As Roland says, when the thermostat turns the heater off, the other circuitry is powered via the heater, but the heater itself has such low resistance compared to the other components it will not reduce their voltage by much. Technically speaking the pump and LED circuits will be powering the heater when used, but only with a tiny bit of heat dissipation.

Big Clive

Yellow, violet, black. 47 ohms.

Dave Frederick AKA @amorphuc

Thanks. Sorry, I thought it was blue instead of violet and upon looking again, Ha, it's clearly violet. My bad.

CharlieVictor

As a tech person in the community theater world, fog/smoke/haze machines are the bane of my existence. They tend to be noisy and finicky, and often do not survive storage. For some reason, nearly every director seems to think that they are necessary for nearly every production. I have been fortunate to at least work with machines that either use a 5-pin XLR or don't use XLR at all.

Big Clive

Those are the reasons why the big TV studios tend to have a permanent oil based hazer in the grid with a tank of carbon dioxide to power it silently. Ultra low maintenance apart from changing the gas tank every so often.

Malcolm J Bannister

Maybe swapping XLR pins in the main unit would make it a tad safer. It wouldn't affect the functioning and it would bring the neutral out on pin 1.

Big Clive

I think the safest option would be removing the XLR connector and putting in a suitable cable gland to hard wire the remote.