Home Creators Posts Import Register Favorites Logout

Content

This lantern makes a refreshing change from the usual "microcontroller in everything" product. It offers zero-flicker stepless dimming, and has extra cell protection.

There's immense potential to upgrade the lithium cell capacity inside the unit to make it a very functional off-grid lantern.

The unit is ruggedly built with a glass cylinder around the bulb.

https://youtu.be/ltVr8awDDck

Files

Inside a rechargeable Nordic Lantern

I saw this light in a local hardware store and thought it was very attractive and functional. The circuitry is refreshingly simple (no microcontroller) and has suitable lithium cell protection. This unit could make a good base for a project to increase the cell capacity for longer use, making it very viable as a pleasing ambient light. At this point in time, the cell is still under test. 3V E27 lamps are fairly easy to find as they are used in some solar strings. But you could also improvise your own filament arrangement with or without a glass bulb. I would guess that this light is probably sold in other countries under different branding, so here's a link to a UK seller as an example. https://www.glow.co.uk/nordic-lantern-usb-rechargeable.html You could also try a search for the keywords:- Nordic lantern USB rechargeable If you enjoy my videos, you can treat me to coffee, cookies and gadgets by supporting the channel on Patreon. You also get early access to videos without adverts, bonus footage and regular quiet Patreon live streams. https://www.patreon.com/bigclive Alternatively, for a single coffee contribution you can use PayPal:- https://www.paypal.com/paypalme/bigclive #ElectronicsCreators

Comments

TopEndSpoonie

Hey Clive. Just FYI, you mentioned 2 "resistors" at 2:21, but they are indeed, caps. Cheers.

Big Clive

Yeah, I do that a lot. I'm always thinking ahead as I talk and sometimes mention the component I'm thinking about. It used to bother me, but I just accept that there are going to be a few comments correcting me.

TopEndSpoonie

Sorry, didn't mean to be "one of those people", and, hey, I was paying attention.

Big Clive

It's fine. On YouTube the extra comments are treated as viewer interaction anyway.

ola garstad

Did you forget the switch in your schematic?

Todd Sharp

Would love to see you stuff some extra cells in that and see how long you can get it to run for. Quite a nice lamp - how much did it cost?

Dave Frederick AKA @amorphuc

Really cool Big Clive. Thanks. Guess they're really only offered in the UK. Ah well. Love the simplicity and the ability to add cells to it. Really kind of nice.

Dr.Andy Hill

As you said, refreshingly simple. Amazon have what looks like an identical lamp. I just searched for nordic lamp.

SOTNAM

I looked at the "Thumbnail" and though you were working in the mines for a sec.

Big Clive

Darn, I did. I've added a note to the video description. It's between the 50K potentiometer and 100 ohm resistor.

Mike Page

It seems to break rules but is not a terrible design.

Big Clive

Technically speaking, the unit is operating within the transistor's specs. 300mW dissipation, collector current of 1500mA and a junction temperature limit of 150C.

Tony Weavers

Clive, will you be making a video on the Siterwell carbon dioxide alarm? I bought one but it always gives enormous readings.

Big Clive

If placed outdoors on a dry day for a while it should show roughly 400 PPM. If it is showing a high reading then let it stabilise outdoors and then bridge the two contacts shown in the instructions (available online). Most versions have a calibration facility that will reset to 400 PPM when the contacts are bridged briefly.

Jack Hodgson

Would adding more 18650s be a problem/challenge for the existing charge controller?

Big Clive

It would still charge at the same current, but would take longer to charge.

Jack Hodgson

Thanks for the reply. I was under the impression that, when charging multiple cells, it was ideal to sense each cell's level, in the event that some were not charging fully.

Big Clive

In this case the cells would all be in parallel, so by default they will be balanced. But when first connecting them in parallel you do have to make sure their voltages are very close.

IamFubar

I really like this design...simple but easily modified into a very nice emergency light for extended power outages.

Alex Taylor

Lots of space for adding a bunch of 18650 batteries. In the states Home Depot has a tool battery recycling bin. I ask if I can take batteries out and they always say yes. One stop there and you can easily get 20 good 2ah cells for this. That would last a while. And the draw is so small you could just use conductive tape to make the pack. No soldering necessary. Just some snips to get the batteries separated. Then wrap in strong tape for structure.

Alex Taylor

That just keeps us on our toes :)