Home Creators Posts Import Register Favorites Logout

Content

This is the panel mounting timer I featured in the most recent unbagging video.

It's very useful, and the design is fairly sensible. This video shows how to use it.

There is a full operating guide in the description of the video.

https://youtu.be/JLuQ0Bd5coI

Files

Inside a T3231 panel timer - setup guide in description

This is one of many useful industrial-style timers from online sellers. It can do various single time delays or repeat a timing cycle continuously. Here's how to program it:- To set the type of timer and timing units, press and hold the S button until P0 appears. P0 (parameter zero) is the timing units. You can use the up/down buttons to select:- 0 = Seconds 1 = Minutes 2 = Hours 0.01 = Hundredths of a second 0.1 = Tenths of a second Pressing S again toggles to P1. P1 (parameter 1) is the type of timer. You can use the up/down buttons to select:- 0 = Delay on. The unit starts with the relay off and counts down the off-timer until it reaches zero and then the relay turns on. 1 = Delay off. The unit starts with the relay on and counts down the on-timer until it reaches zero and the relay turns off. 2 = Delay on then delay off. The unit starts with the relay off, counts down the off-timer, turns the relay on, counts down the on-timer and then turns the relay off again. It does this once. 3 = Delay off then delay on. The unit starts with the relay on, counts down the on-timer, turns the relay off, counts down the off timer and then turns the relay back on. It does this once. 4 = Looping timer starting off. The unit starts with the relay off, counts down the off timer, turns the relay on, counts down the on timer, and turns the relay off. It repeats this continually. 5 = Looping timer starting on. The unit starts with the relay on, counts down the on timer, turns the relay off, counts down the off timer, and turns the relay on. It repeats this continually. To adjust the time delays, double click the S button and use the up/down button to adjust the value. You can hold a direction button to scan through the numbers faster. Press the S button to toggle between the on-timer and off-timer. To exit programming mode you can either press R or leave the unit for 10 seconds. The settings will be stored in non-volatile memory. Pressing R will restart the current timing cycle. Here's an example use. A solenoid is powered by a computerised control system that occasionally crashes and leaves the solenoid powered, causing it to burn out. The solenoid should only normally be powered for about 10 seconds, so you add this timer inline with it and set it up so that it will turn the solenoid off after 15 seconds. For the P0 setting you would choose zero to set the timing unit as seconds. For the P1 setting you would choose 1 (delay off). You would set the on-timer to 15 (15 seconds). The off-timer is not used in this mode. The small relay in the module can handle light loads, but to reduce wear on it, you can use the module to power a chunkier external relay. The module has "dry" contacts meaning they are just acting as a switch. So to power an external relay you would need to power its coil via the relay in the module. This item came from AliExpress (not a sponsor). If you want one then here's a link. This is an affiliate link, but that will not affect the price you pay. https://s.click.aliexpress.com/e/_c3LfXMAF If that link doesn't work then search for the keyword T3231. Cost should be in the region of £5, but that will vary with local taxes and tariffs. If you enjoy my videos, you can treat me to coffee, cookies and gadgets by supporting the channel on Patreon. You also get early access to videos without adverts, bonus footage and regular quiet Patreon live streams. https://www.patreon.com/bigclive Alternatively, for a single coffee contribution you can use PayPal:- https://www.paypal.com/paypalme/bigclive #ElectronicsCreators

Comments

PlutoniumJesus

Timer mode 2 might be useful for a vehicle heater that you want powered for a couple of hours in the early morning but should remain off after that.

Ymir the Frost Giant

I wonder whether one of those 4-button wifi fobs could be used to operate this remotely.

Big Clive

You could use a remote controlled relay to activate it.

Dave Frederick AKA @amorphuc

Thanks Big Clive. That is a very interesting and versatile little unit and ridiculously inexpensive. I want one but I'm still trying to think of a use for it. Maybe hooking it up to my coffee maker to allow it to turn off at a predetermined time? Not sure. I guess it would have to be off all the time until I hit the button for a timer to turn on for a period of time. The parameters that can be set blow me away for sure. Too cool.

Ymir the Frost Giant

That would then make the ideas of others (car heater, coffee machine) much more practical, especially for those who don't work regular shifts etc.

Ymir the Frost Giant

It might even be used to start a car up shortly before you need it.

richard ockman

Process control timer is what i would call this .

IamFubar

This is a very nice timer! The cycle settings would be handy for many things like lights, automatic shades, etc.