Home Creators Posts Import Register Favorites Logout

Content

EDIT: I set this up based on incorrect information provided to me by motherboard vendors. DO NOT USE THESE VOLTAGE SETTINGS

CPU: Ryzen 9 7950XCooling: fan on RAM, EVGA CLC280 on CPUmobo: Gigabyte X670E Aorus MasterRAM: DDR5 Corsair Vengeance ES 2x16GB Single rank SK Hynix 16Gb M-dieRAM / IMC voltagesVSOC: 1.4V // EDIT: NOT SAFE VMISC: 1.1V // upto ??? is safeVDDG CCD: 950mv // upto ??? is safeVDDG IOD: 950mv // upto ??? is safeVDDIO_MEM: 1.38V // upto 1.4V is safeVDDP: 1150mv // upto ??? is safeRAM VDD: 1.43V // upto 1.6V is safeRAM VDDQ: 1.43V  // upto 1.6V is safeRAM VPP: 1.8V // upto 2V is safe

RAM speed and timingsSpeed: 6324Mbps (62x102)UCLK to MCLK: UCLK=MCLKFCLK: 2108MHz (20.66x102)PRIMARY TIMINGS----------------------------------tCL: 30tRCD: 39  (could probably be 1 or 2 ticks lower depending on your sticks)tRP: 39  (could probably be 1 or 2 ticks lower depending on your sticks)tRAS: 30SECONDARY TIMINGS-------------------------------tRC: 68tWR:48tRFC1: 533tRFC2: 300tRFCsb: 200tRRD_L: 4tRRD_S: 4tFAW: 20tRTP: 10TERTIARY TIMINGS-----------------------------------tRDRDSCL: 4tRDRDSC: 1tWRWRSCL: 6tWRWRSC: 1tWRRD: 2tRDWR: 16

Power Down mode: DisabledDF cstates: Disabled

any timings not listed above should be left on auto.Stress tests passed500% HCI memtest100x Linpack Xtreme 10GB9999 seconds Ycruncher Component Stress testTestmem5 Extreme1 Anta777

Performance53.5ns AIDA64 latency

Comments:

Motherboard provided by Gigabyte, RAM provided by Corsair

Comments

HOBAKAS

can you do the same with 2x32Gb base 5600 with this board and CPU

Hi Tek

Thank you for this, I was waiting for a guide for us that have a job that isn't overclocking 😅 One question, why is tRFC1 so high? I think I've seen other OCs with 100% stability in the low 500 range

Eljo Anthony N J

Hey Buildzoid! Thanks for the post. For mem OCing, can you suggest a budget B650 board?